The Do-It WHB-48C is the jig mold you want if you’re going after the picky “pickerel.” It’s jig head is designed to resist snags on rocky bottoms and gets in where others can’t! The tapered, wedge-shaped Walleye Jig slips between stones that would hang up a typical round head jig.
Do-It JW 7 a?
The Do-It JW-7-A2 walleye jig mold casts a head that is designed to resist snags on rocky bottoms and gets in where others cant! The tapered, wedge-shaped Walleye jig slips between stones that would hang up a typical round head jig. The JW-7-A2 mold has 7 cavities – Weight Oz.
Do-it molds live bait jig?
Do-It Molds : Live Bait Jig Mold. This classic jig is designed to be tipped with minnow, leech or other live bait. A special style 571 short shank hook is used to keep the ait close in for enhanced action and hooking ability. The model 3433 mold also is poured with a size 0 wire eye.
Who makes fishing jig molds?
Do-it Corporation
Do-it Corporation is a 50-year-old company that is recognized as a world leader in the tackle craft industry. Do-it has built this reputation by manufacturing the highest quality jig molds, lure molds and sinker molds available.
Do-it molds drop shot?
Try the Do-It Finesse Drop Shot Molds today and make sure to check out the Drop Shot Line Grip Swivels.
Product Details.
| Do-It | Item # | Mold Sizes(oz.) |
|---|---|---|
| 3/16 Drop Shot | 3443 | 3/16 |
| Tear Drop Shot | 3511 | 1/16, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1oz |
| Worm Nose Sinker | 3474 | 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 |
Do-it molds brush jig?
Do-It has spent countless hours developing the BSH-3-SA Weedless Brush Jig Mold. They started with surrounding the eye with lead to minimize any snagging points. They carefully positioned the Mustad 32786NPBN jig hook to give the best angle for the powerful hook sets needed in heavy cover.
Do-it crappie jig molds?
The Do-It JC-6-1632 crappie jig mold produces a fine crappie jig that can be used all year round on crappie and other panfish. The JC-8-1632 is a 6 cavity mold that makes 3 each of jig size oz. (Hook Size) 1/32(#10) and 1/16(#8) ounce jigs. Use only the Mustad 33903BR kinked shank hook.
Is it cheaper to make your own jig heads?
In many cases anglers can purchase jig head hooks in bulk, which is usually much cheaper and with low lead costs jig heads can be made cheaper than you can buy them. For the most part, jig heads can be made with less expense than buying them already made.
Do-it FDS 8 a mold?
Do-It FDS-8-A Finesse Drop-Shot Sinker Mold
The #7 dropshot swivel has a V-shape in the eye to grip the line without tying. Drop-shot sinkers can easily be replaced or adjusted.The FDS-8-A mold has 8 cavities – 1/32, 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, 5/8 oz..
What is weedless poison?
THE WEEDLESS POISON TAIL JIG Like the venomous scorpion, this highly evolved jig sits poised to deliver a toxic strike at its prey. The wide protrusion of the head with a flat bottom provides extreme stability and balance to this design. The pronounced brow and recessed eyes serve to anger and entice its prey.
Do it molds teardrops wire keepers?
Do-It JT-7-WBA Teardrop Jig Mold with Keeper
The Do-It JT-7-WBA jig mold accepts a small wire form that works as a very effective soft plastic bait holder.
Do it molds banana jig?
Do-It JYS-4-A banana jig with a ball collar mold is popular with both fresh and saltwater fishermen. The snag resistant jig has a forward center of weight to give it a unique nose diving action. 4 assorted cavities. Jig weight(Hook Size) – 1/8(1/0), 1/4(2/0), 3/8(3/0), 1/2(4/0) oz jigs.
Do it molds aspirin head?
The flat sides of the Aspirin-Head jig allow it to cut current well. These flat sides also permit placement of stick-on lure eyes. Soft plastics readily attach to the Aspirin-Head Jigs barb collar.
What are jig heads made of?
lead
Jigs are made using a mold, which shapes metal to form the jig’s head and collar. Most jig heads are made from lead, which gives the lure its weight. Tungsten is also becoming a popular substance for weighting jigs as it is heavier than lead and more environmentally friendly.
What are sinker molds?
Sinker Molds | Do-It Sinker Molds
Do It molds are the standard for quality fishing tackle making molds. Our Do It sinker molds are available to make almost any fishing lure you can imagine. Do It mold faces are machined smooth and flat and individually fitted together.
Do it molds soft bait mold injector?
Do-It Molds Soft Bait Mold Injector
This injector is used to push heated soft plastic (plastisol) into Do-It Essential series soft bait molds.Injector becomes hot with use. We recommend our Hot Mill gloves for handling hot injectors, plastisol and worm molds. Injector holds 4 ounces or plastisol.