The jumper wire connecting terminals RC and RH are most common, and this jumper wire is not necessary on Sensi thermostat.
Do I need a jumper between RH and RC?
Nest thermostats don’t use jumper wires
Instead of using jumper wires, Nest Learning Thermostats use an internal jumper between the Rh and Rc connectors.If your current thermostat has a jumper wire, do not enter it in the Nest app to get a wiring diagram or o?connect it to your Nest thermostat.
Why is there a jumper wire from RH to RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
Do I need a jumper for my thermostat?
If your HVAC system has both heating and cooling functions, you’ll need to connect both the Rc and Rh terminals with a red wire. Because many thermostats come with a pre-installed thermostat jumper wire that connects these terminals, you only need one red wire, which could be the thermostat Rc wire or the Rh wire.
Does red wire go to RH or RC?
There is no standard for the colour of the RH wire, but most units use a red one. The RC wire, on the other hand, refers to red cooling. It’s the same with the RH wire in that it powers the thermostat. For the RC, it powers the cooling system.
What does RC and RH mean on a thermostat?
RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system, but not in a five-wire heating/cooling system.)
Does ecobee need a jumper?
The Ecobee3 connects the Rc and Rh terminals automatically which means you can choose either Rc or Rh to plug the wire into. It also means no jumper bridge is needed.The Ecobee3 and some other smart thermostats don’t use batteries, so a common wire is necessary.
What are RC and RH wires?
Rh stands for Red-Heat and Rc stands for Red-Cool. If you only have a single red wire the jumper between Rh and Rc are required for some heating and cooling hybrid systems depending on your thermostat. Yellow/Y is the AC compressor. White/W is the Heating element. Green/G runs the fan.
Where does Rh wire go on thermostat?
The Rh wire connects to your heating system as opposed to your cooling system. This wire may be red without an H attached to it, depending on if you have a dual transformer setup. The Rh wire connects to the RH terminal on your thermostat.
What happens if you short thermostat wires?
2 Answers. If you short the R wire to the C wire, you’ve effectively created a very low resistance closed circuit across the secondary of the 24V transformer in the HVAC system. This causes the current in the circuit to be high, which may quickly overheat the wires.
What is the jumper between R and RC on thermostat?
Some thermostats have a jumper switch, some have a metal staple, others may have a plug, and the jumper may also just be a wire connecting the two terminals. If you have two wires, R or RH will go into the R terminal, and RC will go into the RC terminal.
What is the purpose of a jumper wire?
A jump wire (also known as jumper, jumper wire, jumper cable, DuPont wire or cable) is an electrical wire, or group of them in a cable, with a connector or pin at each end (or sometimes without them simply “tinned”), which is normally used to interconnect the components of a breadboard or other prototype or test
What is a thermostat jumper?
A thermostat jumper wire is a short piece of wire connecting two terminals on the thermostat base.If you have a jumper wire on your old thermostat, discard it and input only the wires from the wall into the Sensi app when prompted during installation.
Does R go to RC or RH ecobee?
If you only have one R wire (That includes R, Rc, and Rh), you’ll insert it into the Rc terminal on your ecobee. Do not jumper any R wires! If you don’t have an Rc wire, Rh serves as both the heating and cooling power wire.Learn how to install an ecobee thermostat in a dual-transformer system.
What does RH mean on a thermometer?
Relative Humidity Defined. Relative humidity (RH) indicates the amount of water vapor (percent) that’s actually in the air compared to the maximum amount that the air could hold under the same conditions. The warmer the air, the more moisture it can hold.
Does an ecobee thermostat have a battery?
The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.However, those with McMansions take note: The sensors have a range of only 45 feet.
Does ecobee run on batteries?
Your ecobee room sensor is powered by a single 3 Volt CR-2032 battery.
What is AUX on thermostat?
Aux is short for auxiliary heat. If a heat pump is having a difficult time coming up to a certain temperature quickly due to extremely cold outdoor temperatures, the aux heat indicator means that a secondary heat source (generally gas or electric) has been deployed.
What color is the RH wire thermostat?
Red
Thermostat Wiring Color Code Chart
| Marking | Wire Color Code | Description |
|---|---|---|
| Rh | Red | Power from heat, 24 Vac transformer |
| C | Black/Blue | Common of 24 Vac transformer |
| W | White | Primary heat cell relay |
| E | Brown | Emergency heat relay |
What is the K wire on a thermostat?
K: Honeywell wire saver modules combine the Y and G wires to form a single K wire that connects to the K terminal on some Honeywell thermostats. It’s used for systems that don‘t provide a C wire but have a thermostat that requires one.
Can you get shocked by thermostat wires?
Virtually all room thermostats operate on low voltage that carries little risk of harmful electric shock.Don’t tamper with a thermostat that controls an electric baseboard heater; these usually carry full-strength household current and can deliver a fatal shock.
Contents