Do Blinds Go Inside Or Outside The Window?

Inside mounts are the most popular choice. They offer a clean, finished look because the blinds or shades are recessed and contained inside the window casing. Inside-mounted window treatments are NOT the best choice for you if: Your window frame is not deep.

Where should blinds be placed in a window?

For maximum privacy, mount the blinds above the window frame and extend them past the sides and bottom of the frame. Light bleed around the blinds is decreased with the extra width and length. If necessary, shim the blind bracket out so the blind falls freely.

Which way do blinds go to keep the sun out?

When blinds are closed with the slats turned up and the rounded side facing out, the heat is directed towards the ceiling, which helps keep the room cooler. This is the ideal position for blinds in the hotter months.

Where should inside mount blinds be placed?

Attaching Brackets:For outside mount, the brackets should be placed on the face of the window outline on the two sides of the window. And for inside mount, the brackets should be put up against the inside top corner of each side window.

How close to the window should blinds be?

2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top by at least 1-1/2″. Some products may require more then 1-1/2″ above the window for mounting hardware.

How far should Window blinds be from window?

As a general rule: 2″ horizontal blinds such as faux wood blinds and wood blinds need at least 1.5″ inches and 3″ for a flush mount. Honeycomb Shades for instance require less space needing just under 1″ depth and 2″ for a flush mount blind.

See also  How Can The Location Of The Dust Particles In The Optical System Be Determined?

How deep should inside mount blinds be?

3⁄4"
3⁄4″ is the minimum depth required for inside mount blinds.

What is inside blinds?

An inside mount is when blinds or shades are installed inside the top of the window frame.Installing window treatments as an inside mount gives your windows a clean, finished look, allows blinds or shades to be flush with the trim or wall, and doesn’t cover decorative molding.

How do you hang blinds on a hollow door?

Mount a Screw in a Hollow Door

  1. Screw, hollow door anchor (white) and key (red)
  2. Drill pilot hole.
  3. Fold door anchor in half.
  4. Insert anchor into hole up to collar.
  5. Insert key into anchor to spread open toggle brackets inside door.
  6. Insert the screw into to the anchor for a secure hold.

How wide should outside mount blinds be?

Not Adding Width To Outside Mount Blinds
We recommend going at least 2″ wider than the opening on either side, so 4″ total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.

Can you put curtains over outside mount blinds?

Can you put curtains over outside mount blinds? Absolutely! There are many situations in which you may want to place curtains over blinds. It could double the layer for keeping your home private or simply blocking out some light.

How do you hang blinds on a side by side window?

To mount 2 or 3 blinds side by side in the same window frame, they are mounted by butting up the brackets against each other and mounting the center brackets up into the top of the window frame. The brackets come so they can mount any direction. A common valance can cover each of the headrails and the brackets.

See also  Who Keeps The Troll Treasure?

Is it OK if blinds are too long?

Horizontal blinds that are too long look bad, but also create a serious safety hazard for young children. Fortunately, shortening them is easy—all you need are scissors and a screwdriver.

What does inside Mount mean for blinds?

Inside mount refers to window blinds or shades that are mounted inside the window frame. For example, if you have a moulding around the frame of your window, your window blinds wouldn’t cover it up. The window treatment remains inside the frame of the window. This offers a really neat, clean, and modern look.

What is an inside mount window?

An inside mount simply means that the window covering fits neatly inside the window, outlining crisply the inside of the window frame and snugly fitting all around the inside. An inside mount offers the cleanest and most minimal look and can be installed as deep or as shallow as you desire.

Contents

This entry was posted in Mounts & Rods by Alyssa Stevenson. Bookmark the permalink.
Avatar photo

About Alyssa Stevenson

Alyssa Stevenson loves smart devices. She is an expert in the field and has spent years researching and developing new ways to make our lives easier. Alyssa has also been a vocal advocate for the responsible use of technology, working to ensure that our devices don't overtake our lives.