If your ISP permits, you can prevent the external IP address from changing on the router by assigning a static IP address to the device in the Linksys router administrative interface. Obtain a static IP and two DNS IP addresses … Continue reading →

Wi-Fi connectivity issues can cause media and music to buffer or not play. Reduce Wi-Fi congestion by turning off any connected devices that you’re not using.Move your device away from walls, metal objects, or sources of interference like microwave ovens … Continue reading →

You have logged in to the server. Open the Control Panel. Click Network and Internet > Network and Sharing Center > Change Adapter Settings. Right-click the network adapter. Click Properties. Double-click Internet Protocol Version 4 (TCP / IPv4) . In … Continue reading →

The Sky multiroom option uses wireless Mini boxes (which don’t require any drilling) to communicate with the main Sky Q box, allowing you to watch any TV channel you like on up to four different TV sets. The Mini boxes … Continue reading →

Moshi Twilight: This skill help kids fall asleep at bedtime. It features stories with “melodies and calming narration” and “guided relaxations and soothing sounds”. It’s developed by the creators of Moshi Monsters. To start the skill, just say, “Alexa, open … Continue reading →

It is called a subnet mask because it is used to identify network address of an IP address by perfoming a bitwise AND operation on the netmask. A Subnet mask is a 32-bit number that masks an IP address and … Continue reading →

Subnet masks always work from left to right. Devices are said to be within the same subnet if their IP Address starts with the same digits, but ends with a different set of digits.If the subnet mask is 255.255. 255.0, … Continue reading →

In order to find the subnet mask for your host, use the “ifconfig” command with the interface name and pipe it with the “grep” command to isolate the “mask” string. In this case, you are presented with subnet masks for … Continue reading →

A Class B network was a network in which all addresses had the two most-significant bits set to 1 and 0 respectively. For these networks, the network address was given by the next 14 bits of the address, thus leaving … Continue reading →

4.3 billion. There are only about 4.3 billion possible IPv4 addresses, which engineers assumed would be more than enough in the 1990s. With IPv6, there are about 340 trillion trillion trillion combinations — specifically: 340,282,366,920,938,463,463,374,607,431,768,211,456. How many IPv4 addresses are … Continue reading →

In the upper right corner of the “Network and Sharing Center” window, click the name of your network connection. In the “Ethernet Status” window, click the “Details” button. In the “Network Connection Details” window, you’ll find your router’s IP address … Continue reading →

Here’s how to do it. Step 1: Set up your VPN. First, find your VPN, install it, and set it up on your computer. Step 2: Connect your PS4 to your PC with an Ethernet cable. Step 3: Change the … Continue reading →

The recommended internet specifications for a great online gaming experience with your PS4 are: Internet Download Speed: 16 Mbps. Internet Upload Speed: 4 Mbps. The Ping Rate: Always less than 50 ms. What are good connection speeds for PS4? Playstation … Continue reading →

A /32 prefix is commonly referred to as a host route since it identifies a route to a specific IP host address. Since most (but not all) host computers don’t run routing protocols, we could create a host route on … Continue reading →

Zigbee is a protocol that works much like a mesh network, this means that instead of each device which uses Zigbee connecting to your WiFi network, they connect to a central hub instead. Wi-Fi and Bluetooth aren’t great at meshing … Continue reading →