How do I setup the Latch iOS Widget? Unlock your iPhone. Swipe right to view your widgets. Navigate to the bottom and tap ‘Edit’ Tap the ‘Plus’ icon next to the Latch app. Tap ‘Done’ How do I put a … Continue reading →

Wyze Cam v3 does not currently support HomeKit or HKSV at the moment. Does Wyze work with Apple? It also includes native sleep tracking and rudimentary notification support on both iOS and Android. Does Wyze smart plug work with Apple … Continue reading →

How to Set Up myQ® Devices With Apple HomeKit Get your mobile device and make sure it’s connected to Wi-Fi. Add devices and accessories by hitting the plus sign icon. Find the accessory code for your HomeBridge device. Syncing and … Continue reading →

There is no set range for HomeKit in general, rather it tends to depend on what device you are using as the hub. For example, the Apple TV uses Bluetooth 4.0 while the HomePod is using Bluetooth 5.0. The most … Continue reading →

Due to the nature of the Internet as a network, the conventional answer is that, no, it’s not possible. The Internet is nothing but a network of interconnected computers, and you can’t store a network on your device.However, it is … Continue reading →

Here’s how to do it. Position the bridge. Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. Connect the bridge to your network. If your router supports Wi-Fi … Continue reading →

PLEASE NOTE: You should update your operating system to the latest available iOS release before setting up HomeKit. Open the App and go to Lock Settings. Select HomeKit. Select Enable HomeKit. Select Continue. Remove the faceplate from the front of … Continue reading →

What caused power door locks to stop working? An inoperative power door lock can be caused by the switch, solenoid, wiring problem or mechanical problem within the linkage of the affected door. If all of the door locks are inoperative, … Continue reading →

You can also lock or unlock the door remotely via the app when in Bluetooth range, or if you purchase the optional Wi-Fi bridge, you can control the lock from anywhere.Because you have the option for a physical key and … Continue reading →

How do you open a combination with 4 numbers? Dialing a Safe Start by turning the dial to the RIGHT a minimum of 4 turns (this clears the dial of any previous attempts) and STOP on the FIRST number of … Continue reading →

A flashing red light on your Smart Lock indicates that your batteries need to be replaced.Mixing old batteries with new ones can cause batteries to leak, which may damage your smart lock. Why is my Kwikset lock flashing red? Amber … Continue reading →

How do you open a Yale lock with a dead battery? If you need, you can use a 9 Volt battery to temporarily charge the lock, so you can enter your passcode on the lock’s keypad to lock or unlock … Continue reading →

Using The Key To Unlock Your Door The majority of cars now have remote central locking, however, with a flat or dead battery this won’t work and you will be forced to use the key to open the car doors. … Continue reading →

The Kevo has a keyhole, but you might not ever use it. This lock works with Bluetooth to connect to your phone (or Android Wear smartwatch) and open your door for you. When the lock detects that your device is … Continue reading →

Push and hold the reset button for 10 seconds, until the lock beeps. The light ring will flash red, then spin amber. The lock has now been restored and is ready to be set up again. How do I reset … Continue reading →