Honeywell RTH3100C1002/E1 It will maintain the room temperature at the set value. It is dual powered (hardwired/battery). It has a push-button interface that is very convenient to use. This thermostat works well with Multistage Heat Pump Systems (Heat Pumps with and without Auxiliary heat source).
Will any thermostat work with heat pump?
Yes! A majority of TSTAT systems are produced to operate with heat pumps. There are several 2020 Nest, Ecobee, and Lux smart/programmable thermostats models on the market that work well with heat pumps.
Does a heat pump require a special thermostat?
Why do heat pumps require a particular type of thermostat that’s different from an air conditioner’s? The reason is that heat pumps must control both heating and cooling. To switch from one to the other, the thermostat needs to signal the reversing valve to change the direction of the flow of refrigerant.
What thermostats are compatible with heat pump?
Top 5 Heat Pump Thermostats
- Ecobee 4 Smart Thermostat. TOP PICKAn Alexa integrated smart thermostat.
- Nest Learning Thermostat 3rd Generation. RUNNER-UPA smart learning thermostat.
- Honeywell T9 Smart Thermostat. A smart thermostat with occupancy sensor.
- Sensi Touch Wi-Fi Smart Thermostat.
- Lux Kono Smart Thermostat.
Does my heat pump use an O or B wire?
O stands for orange and B for dark blue.
The O and B terminals are for heat pumps; the B terminal is used in conjunction with Rheem, Ruud, or any other manufacturer that energizes the reversing valve in the heat pump’s heating mode.
Why is there a jumper between R and RC?
Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.
Does Honeywell t9 work with heat pump?
The thermostat is compatible with most standard HVAC systems and contains push-to-connect wire terminals for heating and cooling as well as auxiliary terminals for things like heat pumps and fans.
Can I use ecobee with a heat pump?
The ecobee has the ability to recognize whether your system is a geothermal heat pump or an air-to-air heat pump.
How many wires does a heat pump thermostat have?
In heat pump system, there are at least 8 wires that need to be connected to the thermostat for proper operation.
Where should a heat pump thermostat be located?
The best place for your thermostat is on an interior wall, away from all the areas we previously discussed (direct sunlight, air vents, your kitchen, hallways, windows and doors). Ideally, it should be placed toward the center of your home.
Does Nest thermostat work with heat pump with emergency heat?
If you there’s no option for E: Emergency, the Nest thermostat does not detect an O/B wire. Emergency heat is only compatible with Heat Pump systems.
What temperature does a heat pump switch to emergency heat?
Your emergency heat setting automatically turns on when outside temperatures drop below a certain temperature, usually 30 degrees Fahrenheit. If you need to manually turn it on, you should call an HVAC professional to get your heat pump fixed.
Which is better heat pump or furnace?
ENERGY EFFICIENCY
Under ideal conditions, a heat pump can transfer 300 percent more energy than it consumes. In contrast, a high-efficiency gas furnace is about 95 percent efficient. Heat pumps are powered by electricity, so you can save substantially on fuel consumption.
Should thermostat be on O or B?
Most commonly, O/B is energized in Cooling (O on cool). For Rheem or Ruud brand heat pumps, the O/B must energize on heating (B on Heat).
What color is the OB wire?
Orange
Thermostat Wiring Color Code Chart
| Marking | Wire Color Code | Description |
|---|---|---|
| O | Orange | Change-over relay to cool relay |
| B | Blue | Change-over relay to heat relay |
| A | Heat and cool active to any relay | |
| L | Emergency heat active lamp |
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Do I need a jumper between RH and RC?
Nest thermostats don’t use jumper wires
Instead of using jumper wires, Nest Learning Thermostats use an internal jumper between the Rh and Rc connectors.If your current thermostat has a jumper wire, do not enter it in the Nest app to get a wiring diagram or o?connect it to your Nest thermostat.
Does the red wire go to RC or RH?
If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc.If you only have a single R wire, then it will only have an R connector, which is the connection you’ll use.
Do I need a jumper from R to RC?
If you have a wire in the R terminal, and no wire in the RC terminal, use the jumper selector switch, the jumper plug, or a small jumper wire to connect the R and Rc terminals.If you have a wire in the R terminal, and another wire (not a jumper) in the RC terminal, you will not need to connect the R and RC terminals.
What’s the difference between T9 and T10?
The T10 can control Humidification, Dehumidification, or Ventilation; while the T9 cannot.The T10 can control Humidification, Dehumidification, or Ventilation; while the T9 cannot.
Does Honeywell T9 require C wire?
The T9 requires a C-Wire which is common in most newer homes. On Honeywell Home’s site, there is a compatibility checker for you to see if the Honeywell Home T9 will work with your home’s system.You need to go to your boiler or AC unit and locate the wiring. On most HVAC systems, the wires are labeled.
Contents