For me, using a crankbait rod for topwaters is almost a necessity, particularly for “walk the dog” type topwaters. I also use braid almost exclusively, so the extra flex helps prevent me ripping hooks out of their mouth.
What kind of rod do you use for topwater?
Casting rods are the most popular choice for topwater fishing. Most bass anglers prefer to use a baitcasting rod and reel setup for fishing topwater lures.
What are crankbait rods good for?
Medium Power is best for fishing shallow to medium diving crankbaits. The extra flex makes casting lighter plugs easier and with more accuracy. Medium-Heavy Power rods are best for handling heavier deep-diving crankbaits and for fishing around grass.
Can you use a crankbait rod for spinnerbaits?
Don’t Throw A Spinnerbait On A Crankbait Rod!!!
Can you use a crankbait rod for swimbaits?
Crankbait rods can handle swimbait lures that are around two ounces or less, so ideally your swimbait rod will be able to handle lures that are between about two and eight ounces.
What is a good gear ratio for topwater?
The Best Gear Ratio for Topwater Fishing is a 7:1 or Higher.
Can you fish topwater with a spinning rod?
You can fish topwater lures on both baitcasting and spinning tackle. Most experienced anglers rely on baitcasting tackle for the lion’s share of their topwater fishing. But spinning tackle will work fine as well. In fact, it may offer distinct advantages in windy conditions or when casting light lures.
Is a crankbait rod worth it?
“If the rod is too stiff, the fish will pull free or the angler will rip the bait away from the fish.” The bottom line for anglers using crankbaits is to invest in a crankbait rod. Rods specifically designed to throw crankbaits are well worth the money.
What action should a crankbait rod be?
A good crankbait rod should have a relatively slow action. In other words, the rod should start to bend down about half way down when moderate pressure is applied to the top section. Fast action means that just the top third will bend with the same pressure.
What type of rod is best for crankbaits?
Best Crankbait Fishing Rods
- Dobyns Rods Fury Series Casting Rod.
- SHIMANO Curado Crankbait Casting Rod.
- G.
- Lew’s Fishing David Fritts Crankbait Rod.
- St.
- Dobyns Rods 705CB Crankbait Rod.
- Okuma Tournament Concept TCS Carbon Bass Rod.
- Daiwa ZIL801MHRB-G Zillion Crankbait Rod.
What rods does Kevin Van Dam use?
Lew’s Introduces Kevin VanDam Signature Fishing Rods
| Lew’s KVD Series Rods | ||
|---|---|---|
| LKVDCC3 | 7’1” | Accuracy Bladed Jig/KVD 2.5 |
| LKVDCC4 | 7’4” | Medium Crankbaits |
| LKVDCC5 | 7’4” | Open Water Bladed Jig/KVD 2.5 |
| LKVDCC6 | 7’10” | Medium to Deep Crankbaits |
Is a medium heavy rod good for crankbaits?
Medium Heavy Fast will work for crankbaits, and many people prefer that rod for shallow running square bills. I recently got a dedicated crankbait rod that is a medium-heavy moderate action. It really is more suited to crankbait fishing.
What rod is best for Chatterbaits?
The best rod length for chatterbait is 7′ to 7’3”. This is the ideal length to balance optimal casting distance and accuracy, and also helps to control big fish close to cover, since it provides enough leverage for this purpose.
What action rod do you use for swimbaits?
A swimbait rod should be stiff, not for the bass, but for the baits, which can weigh 4 ounces, or more. Many fishermen prefer longer rods as well, both for the extra casting distance and added hook-setting power. The sweet spot for a swimbait rod is an 8-foot rod rated for 1- to 4-ounce lures.
What rod should I use for small swimbaits?
Swimbait Summary
To throw smaller swimbaits, I suggest a medium action, 6 1/2- to 7-foot, high-modulus graphite rod. A rod of that length will allow you to make long casts without any compromise in accuracy. Either spinning or baitcasting gear is fine.
What size rod is best for swimbaits?
Generally, you’ll want to look for a rod that’s around eight feet in length. A couple of inches short of that or over that is fine, but an even, eight-foot length is ideal. If the rod you choose is too short, you won’t be able to land the monster fish, like a musky, with your large swimbait.
How fast should I reel in a crankbait?
The correct speed of any crankbait reel is 21 inches of line pick-up per turn of the reel handle. Most of that information is on the internet or on the packaging. If it isn’t, measure what your reel is doing with a ruler. It’s that important.
What gear ratio is best for crankbaits?
A slow reel is the ideal choice for most crankbaiting. A reel with about a 5:1 gear ratio is going to help you get your baits to their maximum depth and also give you superior feel, so you know exactly what’s going on with your lure. My favorite cranking reel is the new Lew’s BB1.
Is crankbait good for bass?
Crankbaits are some of the most powerful bass lures, because anglers can cover a large amount of water in little time. Often, bass anglers use crankbaits to scout unfamiliar waters quickly and find the areas with the most bass.
Do crankbaits have to hit bottom?
For professionals like Skeet Reese, Todd Faircloth and Mark Menendez, mismatching crankbaits to water depth — especially in the shallows — has become less an exception and more the rule. “As a general rule of thumb, you want a bait that will be in contact with the bottom at all times.
How long should a crankbait rod be?
Rod Length:
Typically, crankbait rods range from 6′ 6″ to 8′ in length.
Contents