If you don’t have a trolling motor to cruise dock lines and mangroves, you can always troll the edges of channels and flats for trout, ladyfish, jacks, bluefish, and mackerel. And once you find a spot with a lot of fish, you can anchor up or drift.
How can I fish without a trolling motor?
To bass fish without a trolling motor you have to let the water push you where you want to go naturally, focus on large areas of cover and structure, and know you won’t be able to stealthily sneak up on bass in shallow water. This sounds difficult, but can be done from any boat without a trolling motor.
Can you troll with a lure?
Lure trolling is a great way to catch fish and is one of the best ways to get the family involved – while you do all the hard work of finding the hot spots, everyone else can have fun holding the rods and catching the fish.
Can you troll with gas motor?
Also if you want to troll very long you will need at least two very good batteries and both must be in tip top shape. I’d say that given the option, the gas motor for trolling is hands down the best choice.
Can you troll with outboard?
The biggest drawback to trolling with a high-horsepower engine is the inability to troll at extremely low speeds. With his 300hp Verado outboard, Saric can troll as slow as about 2.5 mph in calm conditions and a little slower if he’s moving into wind or current.
How shallow can a bay boat go?
If you’re looking to fish shallow flats but also want to make sure you can make a quick hop across the bay on a choppy day a bay boat may be in your future. Most bay boats will allow you that 10-14 inch draft to suite your shallow water needs while also giving you you a comfortable and safe ride in chop.
How far behind the boat should I troll?
Every boat is different and you should make your boat your own study. Proper distance for most boats will be anywhere from 20 feet to 150 feet behind your boat. Whether you have inboard diesel or outboard gas engines, your power dictates the distance you troll your baits and lures.
Do you troll with the current or against it?
When in an area with current, troll crosscurrent as opposed to with and/or against the current. Going crosscurrent, you don’t have to worry about how the current is affecting your lure’s or bait’s speed through the water. Plus, fish generally swim into the current.
At what speed should you troll?
So, what is the best trolling speed? The best trolling speed depends on several factors including the type of fish, water conditions and lure choice. In general, trolling speeds between 1.5 and 2.5 mph, as measured by GPS, are a good starting place for most species like walleye, trout and salmon.
Do gas motors scare fish?
Engines scare fish. But all engines are not equally noisy. The biggest offenders are two-stroke outboards.Again, this metal-on-metal sound travels well underwater, and fish don’t like it.
How many pounds of thrust does a 3.5 hp outboard motor have?
A Bollard pull test showed that the Mercury 3.5hp and Tohatsu 3.5hp were the most powerful at 90lbs of thrust (These two engines along with the Mariner are virtually identical). The least effective was the Honda 2.3hp at 66lbs of thrust.
Can you troll with a drift sock?
The preferred way to use your drift sock for trolling is to first find the fish or landmark on the map you want to target. Then continue past the spot heading into the wind. Drop all lures or bait into the water that you want to use. Deploy your drift sock and let it slow the boat down.
How do I slow my boat down for trolling?
- Shut Down Your Boat’s Engine(s) If your boat has multiple outboards, shutting down one or more engines will allow you to drop speed.
- Shifting Engines Out of Gear.
- Using Drift Socks and Trolling Bags.
- Benefits of an Auxiliary Outboard Engine.
- Using an Electric Motor.
- Outboard Engines with Troll Mode.
Can you troll with a 4 stroke outboard?
You use a four-stroke outboard, either your primary motor or a kicker, for trolling. You usually troll for many uninterrupted hours.
What’s a pleasure boat?
A pleasure boat is a large boat that takes people for trips on rivers, lakes, or on the ocean for pleasure.
What is the deadrise on a boat?
Put quite simply, it is the angle between a horizontal plane and the hull surface. A boat with “a lot of deadrise” is a boat with a deeper, sharper V-shaped hull.
How deep does water have to be to dock a boat?
Optimal water depth is set when the top of the dock is 12”-16” higher than the top of the water. Sectional docks should not be installed in water depths greater than 6 feet (72 inches) for stability and safety.
How do you troll at a certain depth?
There are two ways you can determine the exact depth/lure/speed relationship of a specific rig. The first is to deploy it to a specific distance, then troll up a gradual shelf or edge until it starts dragging bottom. Note the depth, and try to crank it in before it snags.
What’s the difference between trolling and trawling?
The basic difference between these two similar terms is that trawling involves a net and is typically done for commercial fishing purposes, while trolling involves a rod, reel, and a bait or lure,” and is typically done by recreational fishermen.
Is mono or braid better for trolling?
Mono holds knots better and costs less than braid. It also works better on smaller bait-casting reels because light braid can dig into itself. Florida sailfish and dolphin anglers still use a lot of mono on the troll, and some use it for kite lines because it runs through the clips better.
How do you control crankbait depth?
Move your crankbait too slow or too fast and it’ll run too shallow. The bill has to bite into the water at the correct angle for the lure to run as deep as possible. The length of your cast is the next thing that affects running depth. A longer cast will let the bait get down deeper.
Contents