The only way you can troll cranks for any extended period of time with an electric is if you’re using the wind. If you have a decent wind and troll with it than you can get most if not a full day out of an 80 lb thrust motor. Get a kicker if you can.
How long can you troll with a trolling motor?
Almost 5 hours doesn’t seem too bad, but that is really a max runtime in ideal conditions. Reality is likely to be less. If the battery is old, damaged or not fully charged then you will not get the rated amp hours from it, reducing your runtime. Significant cold or hot weather will also reduce your runtime.
Is it better to push or pull with a trolling motor?
Boats do not tend to go in a straight line. Because of this, it is much easier to pull a boat than to push a boat. It is also easier to move the bow of the boat sideways compared to moving the transom. Therefore, a bow-mounted electric trolling motor allows for much greater boat control and positioning.
Can you troll with a Minn Kota?
i-PILOT LINK
Gives you all the features of i-Pilot, plus the ability to connect your Minn Kota trolling motor to your Humminbird fish finder for a fully-integrated fishing experience.
Can you troll with an outboard motor?
The biggest drawback to trolling with a high-horsepower engine is the inability to troll at extremely low speeds. With his 300hp Verado outboard, Saric can troll as slow as about 2.5 mph in calm conditions and a little slower if he’s moving into wind or current.
Does it hurt a trolling motor to run it out of the water?
Your motor is cooled by the water around it, while running it out of the water for a very short time would be OK, it would take a long time to drain the battery much running the motor out of the water with no load. Why risk damaging a very expensive TM to just drain the battery down.
How deep should my trolling motor be in the water?
about 12-18 inches
A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.
What is the purpose of a trolling motor?
Trolling motors allow a boat to stay in one spot when fighting against current or wind without deploying a physical anchor. Tilt the outboard engine out of the water and use the trolling motor to explore areas that are otherwise to shallow too access.
Can you troll for walleye with a trolling motor?
They tend to avoid chasing lures or bait. As a result, more walleyes are typically caught when the boat is moving slower than 1.5 mph. But the wind typically moves a boat faster than you want it to go.Minn Kota’s Terrova or Ulterra trolling motor is a great aid for walleye anglers.
What is the most powerful trolling motor?
Minn Kota
Minn Kota has introduced the most powerful trolling motor on the market featuring 112 pounds of thrust.
Can you troll with a 60 hp motor?
A 60 sure ain’t making 60 hp at idle, but if you run a 5″ or 7″ pitch prop like a T8 or ProKicker does, it would troll slowly too. The trick is to run as little pitch as possible, at as low a rpm as possible, yet still have enough prop to propel the boat at a reasonable speed when opened-up.
Can you troll with a 115 hp?
The 115 will usually put you in the mid-upper 2 MPH range w/o some trolling buckets or bags to slow you down further. 2.7 MPH was the “norm” for me on a 1750 Fishhawh. The 115 4/s Johnson on my 1750 fishhawk will reliably get me down to 2.1-2.2 GPS, slower if I play the wind correctly.
Can you troll with a drift sock?
The preferred way to use your drift sock for trolling is to first find the fish or landmark on the map you want to target. Then continue past the spot heading into the wind. Drop all lures or bait into the water that you want to use. Deploy your drift sock and let it slow the boat down.
How do I increase the speed of my trolling motor?
Make Your Trolling Motor Faster
- Make Your Trolling Motor Faster.
- Change the Battery.
- Reduce the Load of the Canoe.
- Fix a more Streamlined Propeller.
- Put on Lighter Attire.
- Replace the Existing Motor.
- Conclusion.
What is the difference between bow mount and transom mount?
While bow mounts require that a plate be drilled on the bow of the boat, transom mounts easily attach to the boat’s stern with a simple clamp. Transom mounts are also much easier to operate from the back of the boat, and don’t clutter up the deck with foot pedals or cords as bow mount motors often do.
Can a trolling motor shaft be too long?
A trolling motor shaft can be too long. If the trolling motor shaft is too long, you risk the propeller hitting bottom or the inability to stow the motor properly. Too long of a shaft can not only damage the propeller but also the rest of the motor and the environment beneath the water as well.
How big of a boat can a trolling motor push?
Trolling Motor Thrust Guide
| Boat Weight (lbs) | 1,500 | 2,500 |
|---|---|---|
| Boat Length | 14-16′ | 18′ |
| Minimum Thrust | 55 | 70 |
| Performance Thrust* | 55 | 80 |
| Motor Voltage | 12v | 24v |
Can you use salt water trolling motor in freshwater?
We designed a special line of motors for use in salt or brackish water.To extend the life of your Minn Kota Riptide saltwater trolling motor, thoroughly rinse the motor with freshwater after every use in saltwater and store indoors. Never leave the motor submerged in saltwater when the boat is moored.
Is a trolling motor considered a motor boat?
Yes, a boat with a trolling motor counts as a motorized boat in all US states. This means that even if you have a kayak, canoe, or inflatable boat that normally doesn’t require registration, as soon as you add a trolling motor to it, the vessel counts as a motorized boat, and needs to be registered.
What is the difference between a trolling motor and an outboard motor?
What Is A Trolling Motor? A trolling motor is complete self-contained like an outboard motor, but unlike the outboard motor, the trolling motor isn’t going to be the primary source of propulsion. Instead, these motors are lifted from the water when the primary engine is being used.
What are the three primary control types for trolling motors?
You have three main choices for control, steering via a tiller, remote control or foot control. The tiller is the most basic and is best for slow straightforward steering. Many boaters who own a canoe, kayak or pontoon boat use tiller steered trolling motors.
Contents