A 60 sure ain’t making 60 hp at idle, but if you run a 5″ or 7″ pitch prop like a T8 or ProKicker does, it would troll slowly too. The trick is to run as little pitch as possible, at as low a rpm as possible, yet still have enough prop to propel the boat at a reasonable speed when opened-up.
How fast does a 60 hp motor go?
Some 90-hp engines in 18′ aluminum boats with two people aboard will perform almost as well at cruise and have a WOT in the low 40s. 16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.
Does slow trolling hurt big engines?
Extended trolling at low speeds with this motor won’t hurt anything, other than maybe using a little more fuel than a small kicker would. If it was a 2 cycle motor with a Carburetor, then you waould have to worry about loading up after extended periods of idling. Keep trolling and don’t worry about it!
Can you troll with a 40hp outboard?
With the plate down you can troll just fine.
Can you troll with outboard motor?
You use a four-stroke outboard, either your primary motor or a kicker, for trolling. You usually troll for many uninterrupted hours.In the worst-case, the fuel dilutes the oil to the point that it is no longer able to lubricate the engine, resulting in catastrophic damage.
How fast will a Mercury 60 hp 4-stroke go?
The 60hp Merc 4-stroke is slow out of the hole and on this rig top speed on the gps is 34.0mph at 5900rpms with fine tuning the trim.
Is 60 hp enough for pontoon?
Most of today’s motors of 60 HP or larger will work to pull teenagers around on a Pontoon boat of up to 22′….
How do I slow my boat down for trolling?
- Shut Down Your Boat’s Engine(s) If your boat has multiple outboards, shutting down one or more engines will allow you to drop speed.
- Shifting Engines Out of Gear.
- Using Drift Socks and Trolling Bags.
- Benefits of an Auxiliary Outboard Engine.
- Using an Electric Motor.
- Outboard Engines with Troll Mode.
Can you troll with a 150?
Trolling bags work very well! I typically need one for to get to 2.2 mph with my 150 hp. They stabilize the boat in wind and waves very well when trolling. If I need to get to 2.0 mph I will put out a second bag.
Can you troll without a trolling motor?
If you don’t have a trolling motor to cruise dock lines and mangroves, you can always troll the edges of channels and flats for trout, ladyfish, jacks, bluefish, and mackerel. And once you find a spot with a lot of fish, you can anchor up or drift.
Can you troll with a trolling motor?
The only way you can troll cranks for any extended period of time with an electric is if you’re using the wind. If you have a decent wind and troll with it than you can get most if not a full day out of an 80 lb thrust motor. Get a kicker if you can.
Can you troll with a drift sock?
The preferred way to use your drift sock for trolling is to first find the fish or landmark on the map you want to target. Then continue past the spot heading into the wind. Drop all lures or bait into the water that you want to use. Deploy your drift sock and let it slow the boat down.
How fast do you troll for trout?
1.5 to 2.5 mph
Many experts recommend 1.5 to 2.5 mph when trolling. Others argue that while this works well for walleye or other predator species it is too fast for trout. In general, trout will spend the least amount of energy necessary to catch their next meal. This is especially true with water is warmer.
How much does a 60HP Mercury outboard cost?
MERCURY 60HP EFI 4-STROKE OUTBOARD (Listed Fri, 09 Feb 18)$9,170. 60 ELPT EFI Command Thrust – 20 Inch Shaft, Remote Steer. Unbridled power, unexpectedly compact, uncompromising reliability, unbelievable fuel efficiency. Unlike any other mid-range FourStroke the world has ever seen.
How much does a Mercury 60 hp 4 stroke cost?
$8,999.00. In Stock – Brand New 60 Hp Mercury 4-Stroke Command Thrust outboard motor. Includes Electronic Fuel Injection (EFI) plus Power Tilt & Trim. Command Thrust Lower Unit is geared for greater thrust.
How much does a 60 horsepower Mercury outboard weigh?
Specifications – 60 EFI
| HP / kW | 60 / 45 |
|---|---|
| Shaft length | 20″ / 508 mm 25″ / 635 mm (CT model) |
| Gearcase ratio | 1.83:1 or 2.33:1 (CT model) |
| Dry weight *Lightest model available | 247 lbs / 112 kg |
| CARB star rating | 3 |
Can you pull a tube with a 60 hp motor?
A 60 HP engine could pull a two-person inflatable tube (e.g. two small children). However, if you’re looking to please a pair of adult tubers with some speed and adrenaline, you’ll need at least 90 HP – upwards of 115 HP will work best.
Can a 60 HP pontoon boat pull a tube?
If your boat has a top speed of 20 miles per hour, then, yes, you will be able to pull the inner tube.Most modern pontoon boat motors that are 60hp or larger should have ample enough power to pull people behind a 22-foot pontoon on an inner tube at a basic level.
How fast can a 60 HP pontoon boat go?
The Bass Buggy comes equipped with a 60hp engine that reaches a top speed of about 18 mph with a medium load.
Can you troll with a jet outboard?
Trolling motor offers more control and steering but not enough power to troll the ocean. Jet drives offers enough power to troll in the ocean but your gonna need someone to man the wheel at all times…let go of the wheel and your boat is gonna spin in circles, literally.
What is a drift sock?
A drift sock is a large “bag” (think parachute) that attaches to the boat with a harness and a buoy. The harness is attached to the drift sock on one end and the other end is attached to the boat. The drift sock is then placed in the water, where it fills up creating a “drag” in the water.
Contents