1 Factory Reset Remove the circular backing from the back of the sensor. Remove the battery from the battery slot. Gently lift the prongs in the middle of the battery slot with your index fingernail. Place the battery back into the battery slot with the positive side facing down for 30 seconds.
How do I recalibrate my ecobee sensor?
To Configure Temperature Correction
- Press Menu on the main screen.
- Go to Settings.
- Then go to Installation Settings.
- Select Thresholds.
- Then select Temperature Correction.
- Adjust the temperature reading to fit your needs.
What does it mean when ecobee sensor is unoccupied?
When no motion is detected for more than 30 minutes, the sensor will become unoccupied. In Smart Home and Smart Away modes, occupancy is measured every five minutes and lasts two hours.
Can you calibrate ecobee Smart sensor?
What is this? After rebooting, if the sensor is still sending an inaccurate temperature readout, you can go to the thermostat and change the temperature calibration on the Ecobee.This will allow you to adjust the thermostat and sensors’ overall temperature up or down according to your needs.
Is ecobee sensor accurate?
The ecobee temperature sensor has a +/- 1.0F accuracy and is programmed to provide readings every 15 seconds.
How do I reconnect my ecobee sensor after changing the battery?
Place your ecobee thermostat back on the wall and wait for it to power up. Place the battery back in the sensor and the battery cover or sensor stand onto the battery slot. You should now receive a prompt on your ecobee’s screen to pair the sensor.
How long do ecobee sensor batteries last?
five years
CR2032 are the little silver coin shaped batteries used in the old ecobee Room sensors. The sensor will run for at least 18 months. The CR2477 used in the new Smart Sensors should last for five years.
How do I activate my ecobee Smart sensor?
To activate your room sensor, ensure your ecobee3 is awake by standing in front of it or touching the screen. 2. Pull the plastic tab on your room sensor and it will power on and connect to your ecobee3 automatically.
How do I find my lost ecobee sensor?
There is no way for users to track down a lost Ecobee SmartSensor because the devices are not equipped with location alarms; however, you do have the option to scroll down on your Ecobee Thermostat’s main menu to the sensor to see if it is still active.
Are ecobee sensors sensitive?
The remote sensors have a horizontal range of about 120 degrees and a vertical range of about 25-30 degrees. They can detect motion up to 15 feet.They are designed with a sensitivity that is supposed to stop pets from setting off the motion detector.
What battery does ecobee sensor use?
CR-2032 batteries
Change the Battery
ecobee Room Sensors use 3-volt CR-2032 batteries that can be purchased here.
Does ecobee average sensors?
Using occupancy-based algorithms, your ecobee will prioritize the temperature control in spaces where it matters most. If more than one sensor detects motion, your ecobee uses the average of each of your sensors that you’ve selected to participate.
How do I reset my ecobee thermostat?
You can reboot the Smart Si thermostat by pressing the physical hardware reset button, located through an opening in the bottom left corner of the Smart Si thermostat. Rebooting will not alter programming or configuration options.
How many ecobee sensors are needed?
ecobee thermostats can accommodate up to 32 sensors.
How long does it take ecobee to calibrate?
The Calibrating message on your Ecobee thermostat screen indicates that it is measuring the current indoor temperature. Ecobee calibrates once it’s installed initially or when it reboots, and it typically takes around 5 to 20 minutes.
How do I turn off the ecobee sensor?
1 Toggle Sensor
- Press Menu on the main screen.
- Go to Sensors.
- Select the thermostat.
- Select Participation.
- Check or uncheck the Comfort Setting for which you want or don’t want to use the sensor.
How do I know if my ecobee Smart Sensor is working?
4 Pair the Sensor to the Thermostat
- Your ecobee will notify you that it has found a Room Sensor.
- Your Sensor will start to pair and a four digit code will appear on your thermostat.
- Select a name for your Sensor, then tap Next.
- Select when your Sensor will be active, then Tap Next.
Do Ecobees have batteries?
1 Battery Replacement
Your ecobee room sensor is powered by a single 3 Volt CR-2032 battery.
How do ecobee door sensors work?
Ecobee SmartSensors for doors + windows
They work much like other door and window sensors; you align the base sensor with its corresponding magnet, and you can monitor when a door or window is open or closed, as well as when motion is detected.
Do ecobee sensors detect humidity?
For ecobee3, ecobee3 lite, ecobee4
Our Room Sensors will measure temperature and occupancy in the space where it is located. Our thermostats themselves have built-in sensors to measure temperature, humidity and occupancy (ecobee3 and ecobee4 only). You can view these sensors values by device.
What do ecobee smart sensors do?
ecobee room sensors are an additional accessory that you can pair with your ecobee smart thermostat which allows the thermostat to know the temperature of different rooms in your house. Not only do the room sensors detect temperature, but they also have motion sensors so it can tell when somebody is in that room.
Contents