Yes, the receiver has two buttons on it, one for heating, one for hot water. So if your thermostat or hub are down, not connected or broadband is connected, the HW and Heating can be manually turned on and off.
Can you manually override hive thermostat?
Your hub is the part of your Hive ecosystem that connects your thermostat to the internet. If it loses connection to the internet, or if the thermostat loses connection to the hub, you won’t be able to control your thermostat remotely.You can also manually adjust the settings from the thermostat itself.
Can hive be operated manually?
The Hive Active Heating 2 thermostat has been designed to be easy to use.You can use your Hive thermostat to control your heating and hot water manually when at home.
How do I manually control my hive thermostat?
Push the dial to wake up the thermostat. Once the screen turns on press the Menu button and select Heat. Here you’ll see the different modes: Schedule, Manual and Off. Select one by turning and pushing the dial.
Can you turn hive off?
If you have Hive Active Heating 1: If you need to turn your heating off press > on the thermostat until you reach OFF.You can also set your heating to Off using the app or website for either Hive Active Heating product.
Can I use Hive thermostat without hub?
For Hive Active Heating a hub, a receiver and a thermostat are installed. When this service hasn’t been bought, the thermostat and receiver can also be installed without a hub. This is known as ‘stand-alone’ mode.
How do I stop hive from searching my thermostat?
actively seeking to connect If no thermostat is found within to a Hive thermostat. this time it will stop searching and the status light will turn solid white. by pressing the heating’ and ‘hot water buttons on the receiver (hot water only available on dual channel receivers).
How do I turn off hive receiver?
Switch the boiler off at the isolation switch/fuse spur (this should be located near your Hive Receiver next to your boiler). All of the lights on the receiver will then go out.
Why has my hive gone offline?
If your Hive Light is showing as offline in your Hive app or website dashboard it could be because it’s been switched off manually from the existing light switch on the wall or lamp.If your wall or lamp light switch is switched to on and you’re still unable to control Hive Light remotely, try restarting your Hive Hub.
Can you control hive without WiFi?
Yes, your thermostat will continue to function on its pre-set schedule if not connected to WiFi. However, without Internet connection, you will not be able to control your thermostat remotely, but instead you will have to adjust the configuration from the thermostat itself.
How does Hive control hot water?
Hot water can be controlled within the Hive app by selecting Hot Water in the app dashboard. You can’t control your water temperature with the thermostat but you can turn your hot water on or off, set a schedule or boost it (which turns the hot water on for 1-6 hours).
Why is my hive thermostat not working?
Check that your broadband connection is working and that your Hive Hub is showing a green light. 2. Check that your Hive Thermostat is available in your app.Once you have verified the furnace has power, try removing the thermostat body from the wall and check that all the wires are connected securely to the terminals.
Why won’t my central heating turn off?
There are a couple potential reasons why your heating system won’t turn off: Bad thermostat: A faulty thermostat can normally be repaired. Faulty wiring, a broken switch, or broken heating sensor can be fixed depending on how severe the issue is.
Is there a monthly charge for Hive?
Hive Live is a monthly subscription service that gives you the following benefits: Ongoing warranty on all of your Hive products. 10% discount when you buy any Hive products. Free delivery on all orders.
Can you use someone else’s Hive hub?
Your Hive Hub can’t be used by the new occupier of your home, so take that with you so you can install it in your new premises. If you’d like to continue using Hive Active Heating, you’ll need to buy it for your new home if it’s not already installed there.
Can I install Hive thermostat myself?
Can I install Hive myself? Yes you can. Hive installation is pretty easy yourself, will save you the cost of an engineer and should only take about an hour to complete.
Why is green light flashing on Hive receiver?
Flashing Fast Green = Hub is trying to connect to the internet. Flashing Slow Green = Hub is trying to connect to the Hive servers or is in upgrade mode. Wait for 20 minutes and refresh your Hive app. If your hub is still offline then please follow the steps below.
How do I delete an offline Hive device?
All you need to do is:
- Press “Edit” on the app (bottom left of the Dashboard)
- Press the “X” above the offline device in question.
- (This will then populate the attached screenshot)
Why does my Hive thermostat say searching?
The Hive Thermostat display will show ‘Search’ when it is searching for the Hub. A timer will show how long the thermostat has been searching. Log into your Hive app and head to install devices to pair your thermostat.
Why is my heat on when the thermostat is off?
A check valve is used to stop the natural convection from warming up your home when your heating is switched off. If the check valve is broken or blocked, heat will rise through your system causing your radiators to stay hot. Once again, contact a qualified professional to come and check what the problem is.
How do I turn off frost protection on Hive?
You can activate ‘Frost Protection’ by turning your heating to ‘Off’ on the Hive app, or the thermostat. Alternatively if you use your Hive Active Heating 1 thermostat in ‘Manual’ just turn the target temperature right down until you get to ‘Off’.
Contents