Window shades such as roller shades, honeycomb cell shades and others come standard with top mount brackets. If you have an application where the blinds cannot be mounted into the top of the window frame you will need to request a side mount bracket.
Do roller shades go over or under?
When roller blinds are assembled a piece of fabric is attached to a top tube. Over roll refers to the way in which this fabric is attached to the top tube. Over roll means the fabric rolls over the top tube. Under roll means the fabric rolls under the top tube.
Can roller shades be bottom mounted?
If you want to let a little sunshine into the room while maintaining your privacy, a bottom up roller shade is an ideal solution. This type of window treatment requires nothing more than a traditional roller shade. Rather than installing at the top of the window, it is installed at the bottom.
Can you mount blinds from the top?
Inside mount blinds and shades are installed with the brackets attached to the inside of the window frame, and depending on the bracket, they can be placed almost anywhere on the top, or the corner of the inside window frame.
How do you install roller blinds without a drill?
How To Hang Blinds Without Drilling Holes
- Magnetic Blinds. The magnets at the back of these brackets make installation a rather seamless process.
- Tension Rods. Hang these blinds on a tension rod, which you can position inside your window trim.
- Command Strips.
- Self-Adhesive Blinds.
Should roller shades roll front or back?
There are two ways that a roller shade can roll on to the top tube. The traditional way is to have it roll up the back of the shade and over the top. Another way to do it is the reverse of that. A reverse roll shade rolls up the front of the shade and over the top toward the back.
Which way should a roller blind go?
Ideally, you would opt for a back roll. This is where the blind fabric unrolls from the side of the barrel which is closest to the window. This choice will ensure that the maximum possible amount of light is blocked from entering your room by the blind (having the opposite effect of blackout blinds).
How do bottom up roller blinds work?
The bottom up function operates like a regular shade, by pulling down on the correct cord to lift the bottom to your desired level. To bring the shade back down, pull the cord towards the middle of the shade to unlock it and then allow the cord to lift up.
Are roller blind brackets universal?
Most of our blinds use brackets that need to be screwed onto a flat surface, and most are universal enough to be able to choose how you attach them. There are limitations on where brackets can be attached though, and this needs to be considered before choosing where you’ll fit the blind.
How do I block the sun on my patio?
21 Ways to Add Shade to Your Outdoor Living Areas
- Plant trees.
- Add a gazebo.
- Invest in patio umbrellas.
- Stash a pop-up canopy.
- Install a pavilion.
- Include marquees in your patio design.
- Hang patio curtains.
- Construct a permanent roof.
Can roller blinds be fitted outside recess?
A benefit to fitting roller blinds outside of a recess is the increase in light that it produces.Conversely, when a roller blind bracket is fitted outside of a recess, it will be situated far above the top of the window itself, enabling the maximum amount of light exposure possible.
Will command strips hold a roller blind?
Benefits of Command Strip Blinds
Using command strips leave no lasting damage to your window frames. Command strips work on painted wood, tiled walls, glass, drywall, and metallic surfaces. You can hang your blind on the window frame or on the wall beside it.
Can I hang blinds with command strips?
Command strips are one of the easiest and simplest ways of hanging blinds without making any damage to the walls or window frame. These strips work well on any surfaces like stained, painted, plaster, drywall, metal, and many more.
How do you hang curtains over blinds without drilling?
5 Easy Ways to Hang Curtains Without Drilling
- Use 3M Command Hooks.
- Try Kwik-Hang Curtain Rod Brackets.
- Use Tension Rods.
- Get Creative With Coat Hooks.
- Try Magnetic Rods on Metal Doors.
Contents