Can I Use 48V Battery On 60V Motor?

If the motor is expecting a particular current at 60V, it should still run at 48V, but the lower voltage will only push about 80% of the optimal current, so the stall torque will be diminished and maximum speed will be diminished.

Can a 48V controller handle 60V?

Re: How to use a 60v battery pack on 48v motor
You need to know the max voltage charge of your 60V pack to determine if it will work with your setup. What’s the specs on the pack? At worst, you will need a new controller, but if max charge is 60V, then it will work fine without a problem.

Can I use a 48V battery with a 72V motor?

no, you can’t; you need a 72V controller, made or bought.

Can I use a 52V battery on a 48V motor?

As long as you are using a Juiced Bike with an LCD display, the 52V battery can be used. The 52V battery pack is designed to be interchangeable with that of the 48V bikes that use an LCD display (CrossCurrent S and RipCurrent S).

Can I use 60V charger to 48V battery?

yes. but only if you make sure that the charge current is not more than 1/10th of the Ah capacity.

Can I use 48V battery with 24V motor?

Re: Advice: 24V controller with 48V battery
As is,, it may well run fine on 48v, but have a very low setting on it’s low voltage cutoff. As long as you are not relying on that cutoff in place of a bms on the battery,, I’d just run it as is.

See also  Can I Use 120V In Germany?

How fast does 60V go?

It has a cruising speed of 42 mph.

What battery do I need for a 72v 3000w motor?

The battery you need must at a minimum Provide 41.7 amps at 72 volts to supply 3000 watts of power. You can use any battery that has the capacity to supply more amps at 72volts but it is the 3000 watt load that determines what the current draw will be in most cases.

What is the difference between 48V and 52V battery?

The Difference Between 48V and 52V Batteries
The difference between the two is power and performance: A 52V battery delivers better performance. A higher-voltage battery provides greater efficiency, with the battery using less electricity to provide the same or better power for the bike.

Can I use a 52V charger on a 48V battery?

No, you must use a 52V charger to charge a 52V battery pack. The 52V pack requires a higher charging voltage and is not interchangeable with a higher or lower voltage battery pack.

Can I use 60v battery on Bbshd?

So the 60 volt Flexvolt is actually a 58 volt battery. I have the 52 volt version of the BBSHD and an extra 6 volts is not likely to damage the controller. Heat is what usually destroys the MOSFETs, so as long as you have the current set to the default 28 amps, it will probably be fine.

How do I convert 48v to 12V battery?

  1. Wire groups of 3 batteries in parallel, giving 12 V with 3 times the capacity. Then connect 4 of these parallel groups in series to get 48 V.
  2. Wire groups of 4 batteries in series, to produce 48 V series strings. Then connect 3 of these strings in parallel.
  3. Wire pairs of batteries in series, giving 24 V.
See also  Are Ionic Compounds Insulators In Solid Form?

Can you charge a 48v battery with a 12V charger?

However you can charge 48v with a 12v charger it will just take a lot longer also the slower you charge your battery the more life you will get out of it charging at a high rate does damage battery faster less life on battery.

Can you charge 60V battery with 72v charger?

If a 60V charger is used to charge a 72-volt battery, the battery will not be charged directly because of the high voltage, but because the highest output voltage is 72 volts, which is much lower than the charging upper limit voltage of 72-volt battery 86.4 volts, it is impossible to fill a 72-volt battery, so it is

Can you run a 48V motor on 24v?

Default LVC for all 48V controllers will be 40-42V, so the answer is no for the stock controller. However, you can always change the LVC to a lower voltage and the controller will work down to whatever you set it at.

Can a 36v speed controller handle 48V?

it won’t work unless you regulate the battery to 36v. the controller might be smart enough to regulate, they usually aren’t and will catch fire. if you use a 48v controller on the 36v motor, it will run hot and live short.

How fast is 48v in mph?

Any car at any weight at 48 volts will go exactly 0 mph.

How fast can a 60V in mph?

60V Li-ion 13Ah (Hero) or the LG 60V Li-ion 21Ah (Super). The bigger battery will have a longer range. All other specs are the same. Maximum speed is 28 mph (45 kph).

See also  Who Makes Nanopowder?

How fast can a 48v motor go?

For example, if you have a 48V e-bike that travels at about 20 mph (32 km/h), you can swap on this hub motor and reach speeds closer to 28-30 mph (45-48 km/h).

How long will a 1000w 48V battery last?

Edit: And of course speed. If you go slower you will get more miles. The standard rule of thumb around here is volts times amp hours equals watt hours. 48v x 15ah = 720wh / 27wpm = 26.66 miles range on a full charge and a new battery.

How fast can a 52v eBike go?

52v 1500w 37/60 mph 3.5kg Water Proof Easy Connect ebike kit.

Contents

This entry was posted in Power by Claire Hampton. Bookmark the permalink.
Avatar photo

About Claire Hampton

Claire Hampton is a lover of smart devices. She has an innate curiosity and love for anything that makes life easier and more efficient. Claire is always on the lookout for the latest and greatest in technology, and loves trying out new gadgets and apps.