Meet the App. Available for iOS & select Android devices, the smart lock app controls Kevo right from your smartphone or tablet. Grant access with eKeys and monitor who is locking and unlocking.
How do I connect my Kwikset lock to my phone?
On the Overview screen, tap the More icon, then tap Add a Device. On the Add a Device screen, tap the Kwikset model number you purchased. Tap Continue. You will be presented with tasks to complete before you can move forward with device pairing.
How does the Kwikset app work?
There are two models a touchscreen and a keypad and works with the Kwikset App which allows a user to remotely lock and unlock the deadbolt, program custom access codes with schedules, view lock event history, and even share management of the lock with others.
Does my Kwikset lock have Bluetooth?
Aura is a Bluetooth lock so you will need to be within Bluetooth range to control and manage the lock from your smartphone. Some features, such as sharing an existing access code, is available even if you’re not in Bluetooth range.
How do I connect my Kwikset to Bluetooth?
Ensure that Bluetooth is on, as indicated by a small icon on the upper right corner of the smart device screen. 3. Press and hold the Program button again until Kevo beeps (if sound is turned on). The Bluetooth symbol in the top right corner of the screen should blink while Kevo and smart device are communicating.
How do you unlock Halo Kwikset?
The screen has to be awoken via either a 2-second touch-hold by a finger or, more efficiently, simply covering the screen with your palm. Once the touchscreen keypad appears, a single tap on the lock icon on the bottom right corner of the keypad locks the door, and tapping your PIN code retracts the bolt.
Is Kwikset App free?
The Kwikset App is available for free download from Google Play or App Store by searching for “Kwikset” and installing the “Kwikset Smart Lock App”.
How do you open a Kwikset lock with a dead battery and no key?
Use a Key To Enter Your House
If you forget your access code, cannot seem to enter the correct digits, or the battery on your Kwikset lock dies, use the key that works with your Kwikset front door lock. The Kwikset will open immediately, and then you can swap out the batteries to get the system working again.
How do you break in a lock?
Bumping a Padlock with a Hammer. Pull up on the shackle to create tension. The simplest way to do this is to insert two fingers into the shackle loop and use them to force the shackle away from the top of the lock. This will put the locking pins inside the lock into the right position for a quick crack-job.
Does Kwikset have an App?
Meet the App. Available for iOS & select Android devices, the smart lock app controls Kevo right from your smartphone or tablet. Grant access with eKeys and monitor who is locking and unlocking.
Can more than one person have the Kwikset App?
Yes, if the user has a compatible Apple device with correct iOS installed, they can be invited to share the control of the lock via Premis app.
How do I use Smart Lock on my phone?
What is Smart Lock and how do I use it?
- 1 Open the Settings app.
- 2 Tap Lock screen.
- 3 Tap Smart Lock. You will be asked to confirm your screen lock. Please note: to use Smart Lock you need to have a screen lock set up.
- 4 Tap on the Smart Lock type that you want to use.
Why is my Kwikset lock not pairing?
My Lock Won’t Pair
Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red. See the Installation and Programming Guides section for button locations for your Lock model.
How do I setup my Kwikset WIFI lock?
How do I program my SmartCode 913 lock?
- Open the door.
- Remove battery cover.
- Press the program button once.
- Enter new user code.
- Press lock button.
- If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.
How do I connect my Kwikset lock?
You’ll first need to open up your smarthome hub’s app and navigate to where you add a device to the hub to put it in search/discovery mode. Once that’s done, press the A button on the back of the smart lock. Wait a few seconds and the lock will connect to your hub.
Why is my Kwikset lock blinking orange?
What Do The Different Colored Lights On The Status LED Mean for my Premis Lock? Amber flashes mean it is locked, while green flashes mean it is unlocked, and red means low battery.
Does Kwikset work with ring?
Kwikset Kevo smart lock now works with the Ring Video Doorbell, so you can use the wireless camera to see and speak with whoever is at your door when they ring the doorbell and unlock it to let them in, all from your smartphone.
How do I connect my Kwikset halo lock to ring?
Before you begin, use the Kwikset app to set up your Kwikset Halo Lock.
- Go to Brilliant Home Screen.
- Tap “Add Device” on bottom tray.
- Tap “Kwikset”
- Follow the instructions on the screen to log into your Kwikset account.
- Tap the Kwikset lock you’d like to add to Brilliant and follow the remaining screen setup instructions.
Does Kwikset work with Siri?
Kwikset Premis HomeKit-enabled Smart Lock review: Kwikset’s HomeKit deadbolt: A solid smart lock that works with Siri.Now, it’s introducing a smart lock that works with Siri.
What locks work with Kwikset app?
The Kwikset App is exclusively for use with Kwikset Halo, Halo Touch, and Aura smart locks.
How do I remove a code from Kwikset Smartcode 910?
Deleting a user code In order to delete a user code, you must override the code by adding a different user code in the same position. For example, if you want to delete the third code, add a different user code in position three. NOTE: Test the old user code to make sure it can no longer unlock the door.
Contents