So what you do is: Open the switch (Duh) Take a brush, the same size you would use for normal lubing, and take a small, tiny little dab of permatex Dielectric grease and rub it on the inside and outside of the area where the coils of the springs become tighter.
Is dielectric grease good for switches?
Dielectric grease is too thick for switches, and will make them feel gummy/ sticky, even with the smallest amounts. Use something like Tribosys 3204, or one of the other more commonly used switch lubes. Dielectric grease is usually used for silencing stabiliser rattle since it’s so thick.
Can you use dielectric grease for lubing switches?
It’s a good lubricant and it’s a good insulator (so it shouldn’t screw anything up electrically).
Can dielectric grease be used as a lubricant?
Dielectric grease does not dissolve in most liquids, so it is good for marine and outdoor applications. You can use this grease to lubricate the rubber parts of electrical connectors, spark plug wires, and to protect electrical connections on your boat or recreational vehicle from corrosion.
What can I use to lube my switches?
Here is our recommended lube options for linear switches:
- Krytox 205g0 – For a smoother and buttery feel. Less is more.
- Tribosys 3203 – A thin lubricant that creates a fast and smooth feel.
- Trbisosy 3204 – Thicker than 3203 but is hard to mess up.
- Krytox 105 Oil – Recommended for the springs only to prevent spring ping.
What lube should I use for linear switches?
Krytox GPL 205 Grade 0
In short, TriboSys 3204 and Krytox GPL 205g0 are tried and true options for lubing Linear switches. They’re both easily applied with a brush, stable and durable, and both help maintain the quietness and smoothness of Linear switches, thanks to their thicker viscosities.
How do you lube clicky switches?
If you really want to lube your clicky switches, we recommend using a super thin lube and applying a thin coat to avoid ruining the switch. Lubing a clicky switch is definitely for the more advanced keyboard enthusiast. Tactile switches can benefit from lubing, but we recommend using a thin lube for your first time.
Can you use wd40 to lube switches?
WD-40 is an excellent penetrant but should not be applied as a lubricant to mechanical keyboard switches. WD-40 is low in viscosity and over weeks will dry out inside the switch housing.
Does dielectric grease expire?
When stored in the original unopened containers at or below 90°F (32°C), Dynatex® Dielectric Grease has a shelf life of 12 months from date of shipment. In Countries where high heat and humidity are a factor, special precautions must be taken.
When should you not use dielectric grease?
See all 4 photos Since it’s a low-viscosity grease, many experts advise not to use dielectric grease in high-temperature components that will see in excess of 500 degrees Fahrenheit.
What do you lubricate keyboard switches with?
What You’ll Need to Lube Switches
- Switch Opener (I strongly recommend a metal one, the plastic and 3D-printed ones just aren’t stable enough in my testing)
- Switch lube (The standard recommendation is Krytox 205g0 for linear switches and Tribosys 3203 for tactile, with some Krytox 105 grease for springs)
- Switches.
How do you lubricate a switch without opening it?
There are two ways to lube your mechanical keyboard switches without desoldering:
- Push-Stem-Lube Method: Remove the keycaps and slide a lubed piece of plastic between the stem and switch housing.
- Spray Lube Method: Remove the keycaps and spray lube the switches.
Can you use Super Lube on switches?
SuperLube is ideal for and can be used to grease your switches, stabilisers and other components of your keyboard. The Synthetic Grease by Super Lube is a patented NLGI Grade 2 heavy duty multi-purpose lubricant that can be used on all mechanical components.
What happens if you Overlubed switches?
Overlubing
Overlubing can make switches feel mushy and unresponsive. You can always wipe away accumulated lube, but this only adds precious time to an already time-intensive project.
Can you lube switches with olive oil?
Cooking oil is an insulator. So, yes the switch would work for a couple of weeks if lubed with cooking oil. Unfortunately, cooking oil hardens and rots over time.
How often should you lube your switches?
There should be no need to reapply PFPE lubricant, even over a period of 5, or even 10 years, as they have properties that are resistant to change from oxidation or temperature. It will not dry out.
Is dielectric grease good for Lubing stabilizers?
5.0 out of 5 stars Great for Keyboard Stabilizers. Got this to lubricate wire for Mechanical Keyboard stabilizers (space bar, left shift, enter, backspace) and it works like a charm. So far the small tube of it has gotten me though 3 keyboards, and I should have enough for 1 or 2 more.
How do you lubricate plate mounted stabilizers?
How to lube your stabilizers without desoldering:
- Remove the keycaps with a keycap puller.
- Cut a thin piece of plastic about ¼” wide.
- Dip the plastic into dielectric grease and insert into bottom of stabilizer.
- Dip plastic into Super Lube and insert into sides of stabilizer.
- Clean up excess lubricant with a cotton swab.
Why use dielectric grease on stabilizers?
Silicone or dielectric grease is a relatively inexpensive solution that works great for cheaper stabilizers which tend to have looser tolerances between the stabilizer post and housing. Expensive stabilizers could potentially benefit from a higher quality lubricant such as Krytox GPL 205 (grade 0).
What happens if you use too much dielectric grease?
While dielectric grease is great for use on electric plugs because it does not conduct electricity and it provides a water-tight seal, too much of it is not very necessary. In fact, if you apply dielectric grease to the extent where it becomes thick and goopy, your vehicle will most likely not start.
Does dielectric grease get hard?
Dielectric grease does not conduct electricity and stays pliable (it does not cure), while silicone grease does not conduct electricity either but cures to a hard form.
Contents