An experienced DIY-er can install most programmable thermostats and some smart thermostats. Don’t forget to turn off the breaker to the HVAC equipment!If the job requires more than just a replacement, a certified HVAC professional can ensure proper installation, as well as operation of your heating and cooling system.
Do I need an electrician to replace a thermostat?
Your best option is to have a C-wire properly installed and run to your new thermostat, which means it will require an electrician’s expertise. Even if you find a DIY article or video online, the risk to your health or home isn’t worth it when dealing electrical wiring.
Do you need a professional to install a thermostat?
And you would be rightin most cases. However, if you are planning to install a new smart thermostat requiring a continuous power supply, and you do not already have a C-wire, you could very well need professional help to install your new device correctly.
Is changing a thermostat easy?
Upgrading to a thermostat that automatically changes the indoor temperature setting is fairly easy, and it can trim about $180 off your annual heating and cooling costs, according to the EPA. Simple models that only control heat are sold at home centers for around $25.
Can you replace an old thermostat with a digital one?
Substituting your analog thermostat with a digital one is an excellent way to save on your heating bill because digital thermostats can control the temperature in your home more accurately. New digital thermostats can save you up to 15% money on your heating bills.
Who should install a thermostat?
Ideally, you should hire an electrician or HVAC service technician to replace or install a new thermostat. However, you can do it yourself. First, turn off the HVAC system.
How much does it cost to install thermostat?
For a standard, 2,000-square-foot home, the cost of installing or replacing a thermostat averages between $112 and $255, including the price of the unit and professional installation. The national average cost is $175. The thermostat will run between $15 and $300, depending on the type and its features.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
Do you need a plumber to install Nest thermostat?
If you have a 3rd or 2nd gen Nest Learning Thermostat, you should have a professional install it. They will identify cables from the boiler, zone valve, or junction box to connect to Heat Link.
How long does it take to install a thermostat?
Professionals estimate that the installation of a programmable thermostat takes just under two hours.
How long do thermostats last in home?
about 10 years
But, just how long will a thermostat last? They generally last about 10 years but can last longer depending on the make, model, and type of thermostat. Over time, these systems start to age and a thermostat may malfunction because of normal wear and tear, dust accumulation, wiring issues, and rusting.
Can thermostat wire shock you?
Virtually all room thermostats operate on low voltage that carries little risk of harmful electric shock.Don’t tamper with a thermostat that controls an electric baseboard heater; these usually carry full-strength household current and can deliver a fatal shock.
Is 75 too high for heat?
What’s The Best Temperature To Set Your Thermostat: Summer
Typically, our bodies are most comfortable when the air inside our home is 74-76 degrees. So, a safe setting is 75 degrees.But, be careful not to set your thermostat too high, as your unit will struggle to return to your comfort level.
Should I turn my thermostat down at night?
According to Energy.gov, the better way to save money on heating bills is to set back the temperature of your home at least 8 degrees for 8 hours or longer (while you sleep). In fact, you can save 1% on your heating bill for every degree that you lower the thermostat.
How do you know if your thermostat in your house is bad?
7 Signs You Need to Replace Your Thermostat
- Your HVAC Keeps Turning On or Off.
- Faulty Thermostat Readings.
- Suspiciously High Energy Bills.
- Constant Temperature Shifts.
- Thermostat Is Too Old.
- Thermostat Fails to Respond to Changed Settings.
- Your HVAC System Short Cycles.
Is a digital thermostat easy to install?
Don’t hesitate to install a digital thermostat because you think the task is difficult. In most cases, it is quite simple to do. Don’t hesitate to ask an employee at a home improvement or hardware store if you have any questions when selecting a digital thermostat.
Can I use any thermostat in my house?
You’ll need to get a thermostat that is compatible with your system’s voltage requirements. Most thermostats work with low voltage systems. And the good news is, unless you have wall/floor heaters or an electric baseboard heating system, you most likely have a low voltage system because they are the most common.
Can an electrician move a thermostat?
Also, the electrician will do more than just install the new thermostat, move it to a new location, and/or add new wiring. They will likely service your HVAC system and check on any other electrical issues throughout the home.
How do you know when you need a new thermostat in your house?
Signs You Need a New Thermostat
- Heating or cooling system will not turn off or on.
- The temperature reading is incorrect.
- Recent spike in your energy bill.
- Frequent temperature fluctuations.
- Thermostat is 10 years old or older.
How many thermostats should be in a house?
You have to have at least one thermostat. You’ll likely have at least one thermostat per zone. This is the most precise and efficient way to save energy.
Can you touch thermostat wires?
It’s “ok” in that if it works, you’re probably in the clear. However, there is a high risk of letting some of the thermostat wires in the bundle touch while doing this (the wrong ones) which would cause a short/surge back to the controller board.
Contents