Can I Cut A Fiberglass Tent Pole?

It’s a good idea to wear gloves when cutting fibreglass to avoid getting splinters and dust in your skin. When cutting the section to length, always cut towards the centre to avoid splintering the edge when you cut through. Cut part way through the pole, then turn it and cut part way.

How do you shorten a tent pole?

To shorten existing shock cords, pull (carefully, using an extra strong grip plier) the aluminum end caps off each pole. Holding onto the slack cord, pull it until it’s taught (on the open end), keeping all the pole segments together. Cut the cord and tie a small knot.

How strong is a fiberglass pole?

Super Durable – They can withstand wind loads up to 180 MPH. That means they’ll be able to weather even a Category 5 hurricane. Budget-Friendly – Because of the precise manufacturing, customizable options, and superior strength, you may be thinking that fiberglass poles are more expensive than other types of poles.

Can I cut tent poles?

When cutting the section to length, always cut towards the centre to avoid splintering the edge when you cut through. Cut part way through the pole, then turn it and cut part way. Repeat until you cut right through. Once you’ve cut all the replacement sections for one pole, fit them before moving on to the next pole.

Can you cut aluminum tent poles?

【VERSATILE AND DIY READY】If you only need to remove part of a section you can use a small pipe/tubing cutter to cut the aluminum section.We’ve created these replacement aluminum tent poles so you can easily disassemble them to remove or add sections to meet the needs of your DIY project.

Which is better fiberglass or aluminum tent pole?

Aluminum tent poles are better than fiberglass poles in almost every way. Aluminum poles are lighter, stronger, longer lasting and a better choice for backpacking tents or large tents. Fiberglass poles are cheaper to produce however, so you’ll often see fiberglass tent poles used in budget casual camping tents.

How much pressure can fiberglass handle?

When such a resin is reinforced with glass fibers the resulting composite can have a tensile strength between 45,000-50,000 psi. It also becomes extremely resistant to impact damage. This high strength for the relative low weight is the fundamental reason that fiberglass composites are popular.

How much weight can fiberglass hold?

While the exact number for the specific strength of fiberglass varies depending on the specific composite, a good average is about 1,307 kN m/kg. For comparison, stainless steel’s specific strength is 63.1, and titanium is 260. That’s a massive difference in favor of fiberglass.

How do you remove a ferrule from a tent pole?

Jam the pole in a vice and heat the tip of the ferrule with a heat gun,grasping the ferrule as it is heat with pliers turn it to see if it starts to move. Care must be taken not to over heat as you will burn the pole.

How do you measure the length of a tent pole?

1 Answer

1. Stake the tent out. Any old stakes will do.
2. With a semi-rigid pole (see below) push this pole through the loops/guides until it is taut.
3. Mark and measure.
4. Once you measure you can order poles from any of a number of sites that sell custom poles.

How do you cut aluminum poles?

Use a wood-cutting saw with carbide-tipped blades to cut most aluminum. Select a fine-toothed blade and don’t cut aluminum with a wall thickness of more than ¹⁄₄ inch (0.64 cm). If possible, choose a saw blade that creates narrow kerfs (the notch or slot made by the saw).

How do you cut a Fibreglass pole?

Align the back edge of the fine-toothed hacksaw blade with the pencil mark. Slowly pull the hacksaw toward you and then away from you to cut into the fiberglass stick. Continuing cutting until you cut the fiberglass stick into two pieces. Pull the masking tape from the fiberglass stick to complete the cutting process.

How tight should tent pole shock cord be?

Tie a simple binding knot about 2″ from the end and tighten. Your peg should now be between the knot and the long end of the cord. Feed the other end of the cord (the long end) into the first section of pole and continue until all sections are on the cord.

Can you replace Fibreglass tent poles with Aluminium?

Re: Replacing fibreglass tent poles with aluminium.
Besides the weight, there’s one more point for the aluminium pole. Whenever a fiberglass pole breaks, you barely can fix it. So you would have to take some replacement with you.

How much stronger is aluminum than fiberglass?

Aluminum typically comes with a lifetime hull warranty, giving you peace of mind in the longevity of the boat itself. Aluminum offers about 10 times the shear strength of fiberglass, which means better fuel economy and quickness out on the water.

What causes tent poles to break?

Causes range from strong winds to poles weakened by age to cheap materials—and sometimes, it’s just plain old wear and tear. If this happens to you, there’s no need to panic—you’ll just have to get a little crafty in order to make it through the night.

Does fiberglass break easily?

Fiberglass is not strong enough to break under normal conditions, but it can be brittle, so if something hard comes into contact with it then there may be cracking or breaking. Boron can help prevent that sort of damage by strengthening the fiberglass and improving its flexibility.

Is fiberglass stronger than wood?

The strength-to weight ratio of Fiberglass Reinforced Plastic compared to metal or wood products can be up to 5 times bigger. The fiberglass strength is maintained due to the fact that the fibers carry the load while the resin distributes the weight throughout the composite parts as required.

Is fiberglass strong and durable?

1. It’s one of the strongest and most durable materials in the world. 2. Unlike wood, it won’t warp, rot or decay from exposure to moisture — or succumb to corrosion, insects, mold or mildew.