With Smart Home/Smart Away enabled, when your thermostat senses you’re home during a scheduled Away period or away during a scheduled Home period, it will automatically override your schedule for comfort (Smart Home) or savings (Smart Away).
How do I enable ecobee Smart Home Away?
Smart Home/Away uses ecobee room sensors to determine whether you’re home or not.
- Wake up your ecobee Smart Thermostat, then tap Menu.
- Tap Sensors.
- Tap Smart Home/Away.
- Tap Enable to turn on Smart Home/Away.
Does ecobee work if WIFI goes out?
Can I set up my ecobee without Wi-Fi? The short answer is yes. Even without a Wi-Fi connection, your ecobee will still function as a traditional thermostat; it will engage your equipment as needed and maintain your comfort set points.
How do I get my ecobee thermostat back online remotely?
Leave both the router and the ecobee off for about two minutes, then plug the router back in first. 3.) Once the router is back up and running, place the ecobee back on the wall and wait for it to finish powering upit should reconnect to Wi-Fi on its own.
What does unoccupied mean on ecobee?
When no motion is detected for more than 30 minutes, the sensor will become unoccupied. In Smart Home and Smart Away modes, occupancy is measured every five minutes and lasts two hours. There are so many ways to customize how your Ecobee sensors work.
What does away and holding mean ecobee?
on the Home Screen. Note: When “Home for now” or “Away for now” are selected, an indefinite hold will be set regardless of your set Hold Action. This means that the ecobee will either stay in Home mode or Away mode until you manually cancel the hold (your schedule will not resume).
What happens to ecobee when power goes out?
Generally, your home is still safe
In event of server outage, your Nest, Ecobee, or other smart thermostat remembers the schedule that it was going to run and continues to run it. It doesn’t need to check in with the mothership to keep your HVAC running. (Note that this is in event of a server outage.
Does ecobee work without electricity?
The only batter that’s in the ecobee 3 thermostat is to back-up the data and you will not be able to access is unless you take the thermostat apart. In the case of a power outage, once power is restored the battery has retained all in the information such as scheduling, etc.
How do I turn on ecobee after power outage?
Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the boardcheck this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.
How do I control ecobee on iPhone?
ecobee app (iOS 11+)
- Open the ecobee app on your iPhone.
- Tap the Account icon in the bottom right corner.
- Select HomeKit under Integrations in the Menu.
- Tap + on the top-right corner.
- Choose Add Thermostat from the drop-down menu.
- Select the home you’d wish to add your ecobee to, then tap Next.
What apps work with ecobee?
the Wink app
You can control your ecobee3 lite using the Wink app on your mobile device or through the ecobee web portal. Adjust the temperature, set your schedule, even check in on rooms if you’ve got room sensors set up.
What devices work with ecobee?
ecobee can be controlled from iOS and Android devices.
We are also compatible with smart home integrations, such as:
- IFTTT.
- Apple HomeKit.
- Samsung SmartThings.
- Amazon Echo.
- Control4.
- Keen Smart Vents.
- Wink.
Is ecobee compatible with WIFI 6?
Yes, it is compatible with both 5 GHz and 2.4 GHz Wi-Fi connections; i.e. it is dual-band compatible.
Why is ecobee calibrating?
The Calibrating message on your Ecobee thermostat screen indicates that it is measuring the current indoor temperature. Ecobee calibrates once it’s installed initially or when it reboots, and it typically takes around 5 to 20 minutes.
How much data does ecobee thermostat use?
While actual amounts will vary based on usage, ecobee estimates that the SmartCamera with voice control will use about 3GB of data a month for the average user.
How does ecobee know if a room is occupied?
The sensors include a motion detector to tell the ecobee which parts of your house are active.The motion sensors are passive infrared motion sensors. This means they use the natural infrared radiation given off by all objects as a means of detecting motion, and therefore work regardless of light or dark.
How does ecobee determine occupancy?
Ecobee sensors have motion sensors that detect room occupancy. Occupied means there’s activity inside a room. You can place the Ecobee in areas around your home where you feel there’s much traffic. In this way, the smart functions such as Follow Me or Home and Away will detect occupied rooms in your home.
Can a smart thermostat detect room occupancy?
The room sensors detect the amount of people present.Most smart thermostats only measure the temperature in the room in which they are located. Room Sensors use their built-in temperature sensors to tell ecobee4 which rooms are occupied and which rooms are not.
How does ecobee know im sleeping?
ecobee3 knows that you are sleeping and will not trigger the motion sensors.On your ecobee3 and in the mobile app under Settings > Sensors > you can see icons and temperature next to each sensor. The following image shows what the various remote sensor status icons mean.
How do I turn off ecobee comfort?
Adjust your Comfort Settings on your ecobee or on the app:
- Select MAIN MENU, then tap COMFORT SETTINGS.
- Select the Comfort Setting you want to customize.
- Adjust the set points for heat and cool, as well as fan mode as required.
- You can also now select which sensors are participating in this Comfort Setting.
- Touch SAVE.
Should I set a minimum fan runtime?
If you don’t want to go back and forth between runtimes in the settings, most recommend keeping the minimum fan runtime to run for five to 20-minutes, depending on the season and the climate you live in.
Contents