Can I Charge A 9.6V Battery With A 7.2 V Charger?

No. assuming your 7.2V pack is lithium, a 9.6V charger is not designed to safely charge a lithium battery of any kind.

What voltage should I charge my 9.6V battery?

12 volts
The output voltage from the 9.6v battery charger is 12 volts with 400 mA. The battery types that can be charged using the 9.6v battery charger are the rechargeable nickel-metal hydride type and the rechargeable nickel-cadmium batteries. The compatible battery voltage should not be more than 9.6v.

Can you charge a 9.6V battery on a 8.4 V charger?

Can I use other NiMH/NiCd battery packs with this charger? Yes. The charger in this combo is only for NiMH battery packs of 8.4V-9.6V (7-8 cells).

Can I charge 9V with 12V?

Similarly, you can charge a 9V battery with a 12V charger, and we show it in more detail below with Lithium-ion and NiMH batteries . The 9V li-ion battery is made of two 3.6V cells lending it a nominal voltage of 8.4. To safely recharge it you need a voltage source of 8.4V.

Can you charge a 7.2 V battery with a 12V charger?

If it is a lead/acid “12V” charger, it likely has a nominal output voltage of higher than 12 volts, and if it is above, say, 14.5V, you could charge two 7.2V batteries in series. If the output is actually 12.0V, then you may still be able to charge one battery if you include a resistor in series.

Can I charge a 9.6 V battery with a 12V charger?

The answer is no, not directly. If the 12V battery is completely discharged, a 9.6 V battery connected in parallel to it, will put some charge into the 12V battery but no where near enough for the 12V battery to be fully charged.

Will a 9v charger charge a 9.6 V battery?

Yes BUT you MUST be careful not to overload the charger or overcharge the battery.

Can I charge a 7.2 V battery with a 5v charger?

Can I charge batteries at 7.2 V? Answer: Even if you apply 7.2v at the Input, this circuit normalizes the Output to 5v and to charge a 7.2v battery you need to apply a greater voltage like 8v-10v.

What voltage should I charge a 7.4 V battery?

They start with a constant current based on the capacity of the battery, and once they reach 4.2 volts per cell, they switch to constant voltage. So you charger needs to be set for a maximum voltage of 8.4 volts, and the current limit set based on your cell capacity.

What voltage should I charge a 7.2 V battery?

between 1.4 to 1.6 V
If the voltage goes beyond a certain specific limit, then it might cause multiple risks; therefore, it is essential to know the voltage at which you should charge your 7.2V NiMH battery. The range of charging voltage is between 1.4 to 1.6 V per cell.

Can I use a 9V adapter for 9.5 V?

Sure. You actually need a little more than the rated battery voltage to charge a battery. Half a volt out of 9 is only about 5% which should be about right. Just check the charge current to make sure it is not more than recommended by the manufacturer, or absent a recommendation, it should not make the battery hot.

Can I use a 12V plug on a 9V device?

If you have a 12V adapter, you might wonder whether you can use it to power your 9V guitar pedals. In most cases, you cannot use a 12V adapter to power a 9V guitar pedal. Using a 12V adapter on a pedal designed to only handle 9V can completely destroy it.

Can you charge a 9V battery with a 6V charger?

Yes, you can, but you need to drop the voltage so that the 6V battery does not over charge. Either a resistor or an Inductor with enough resistaance will do the trick. But you need to know the size of the battery, and the current that the charger pushes out.

Can I charge a 7.2 V battery with a 6V charger?

A 6V supply will not charge a 7.2v battery. It sounds like you are talking about little DC power supplies or battery eliminators, not a battery charger. You definitely want to get a charger designed for charging NiCd and NiMH batteries.

Can I charge a 7.4 V battery with a 12V charger?

No. The 12V charger is almost certainly designed to charge lead acid batteries. Its 2A rating means it will be able to maintain an initial charge of 2A when used for charging a six cell 12V lead acid battery.

Can you charge a 7.2 V battery with a 8.4 V charger?

NO, you can’t! You MUST match the voltage of a charger and the battery, and not just that. Different types of battery must be charged differently.

How long does a 9.6 V Airsoft battery last?

9.6v nickel metal hydride batteries have 8 cells and a single plug wire which is used for both charging or powering your airsoft gun. The capacity is 1600mah which is good for over 1000+ shots if fully charged and used on a stock gun. Mah (milliamp hours) is your capacity — think of it as your gas tank.

How do you charge a NIMH battery?

The cheapest way to charge a nickel metal hydride battery is to charge at C/10 or below (10% of the rated capacity per hour). So a 100 mAH battery would be charged at 10 mA for 15 hours. This method does not require an end-of-charge sensor and ensures a full charge.

How do you charge a 9V rechargeable battery?

How to Charge your 9V Battery:

1. Insert batteries correctly. Make sure that the “+” and “-” terminals are aligned properly.
2. Put the charger into the correct household AC electronic outlet, the red led will light up for proper charging.

How many amps does a 9V battery have?

9V batteries have 0.4 to 1.2 Amps. 9V batteries provide 500 milliamps for an hour. A ‘milliampere-hour’ rating shows you the volume of electricity the battery will generate in an hour before it dies.

Can I charge a 7.4 V battery with 5V charger?

The 5V, 2A is a standard Nokia charger. Then too its not advisable? 7.4 V can’t be charged using 5.0V. You have to charge lithium ion batteries with a charger circuit specifically designed for them.