The convenience of having a single key fit all the locks on your house (including the garage) can be accomplished by rekeyingas long as you have the same brand of locks on all the doors. Rekeying techniques (and key styles) vary from one manufacturer to another.
Are door locks universal size?
To have the door function properly, you will have to make sure that the door knob you buy is the correct size for your door. The standard size for a door knob diameter is either 2 3/8 inches or 2 3/4 inches and these knobs will usually fit doors that are anywhere between 1 3/8 inches to 1 3/4 inches thick.
Are door locks standard size?
In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify. Dummy sets have no latch and are surface-mounted so you can install a dummy set wherever you choose on the door.
Are door locks interchangeable?
Since most homes have multiple doors with multiple locks, re-keying can get expensive. You can re-key a lock like a pro at a fraction of the cost. Re-keying kits are available for most lock brands but they’re not interchangeable. You must buy a kit for each brand of lock in your home.
Can any door knob fit any door?
Make sure the hardware will work with your door thickness. A thickness of 1 3/8 inches is standard for interior doors, while 1 3/4 inches is standard for exterior doors.The most common are 2 3/8 inches and 2 3/4 inches, but some hardware can fit multiple backsets. Make sure the hardware you select fits your door.
How do I know what size door lock I need?
You can work out the size of the lock by measuring the distance from the edge of the door to the centre of the door handle or knob. This measurement will give you the approximate size of the backset which will allow you to identify which size lock or latch you have.
How do I measure for a replacement door lock?
Measure from the outside edge of the door (including furniture) to the centre of your door. This is dimension A and is called the External Size to Centre. Next, measure from the inside edge of your door (including furniture) to the centre of your door to find dimension B, the Internal Size to Centre.
Are deadbolt sizes universal?
Even though there is a standard size for deadbolts, you might need smaller or larger sizes depending on the size and thickness of your door. Different brands have deadbolt sizes as small as 2 inches and as big as 5 inches.
Are all mortise locks the same size?
There are two sizes of mortice locks: 21/2 and 3. If you are installing a mortice lock to a door with a narrow frame, or any door for that matter, it’s very important to know what size lock you need.
Are all door latches the same size?
Overall Latch Size = Backset
We generally recommend that a 76mm Overall Latch Size is ordinarily the best size for most lever handles. However the shorter 64mm Overall Size should be used where the door is glazed, to minimize the risk of hitting the glass rebate when drilling to fit the latch.
Can I rekey my own locks?
Homeowners may not know that they can rekey their locks by themselves. Rekeying your locks saves considerable money, especially when you need to rekey multiple locks. Plus, if you like new challenges, rekeying a lock can be an inexpensive project that helps you learn how locks operate.
Can you mix and match door handles?
Yes, it will need to be the same design but you can use two different colors one for inside and the other for outside the room.When you close the door behind you, the color of the interior handle will match the style of the room and you don’t have to worry about it clashing with the rest of your home.
Can I reuse a door lock?
From chain locks to deadbolts to simple hook-and-eye locks, door locks are made of one highly recyclable material: metal.Because metal can be melted down and re-made into other objects, you save on natural resources and get rewarded with good feelings and a little cash in your pocket.
What is the difference between passage and privacy door knobs?
2) Privacy Door Knobs – Privacy Door Knobs are generally used on bedrooms and baths. They are lockable but do not have a keyed cylinder.3) Passage Door Knobs – Hall and Closet or Passage knob sets do not lock. They are generally used on closets or other doors where a lock is not required.
Is there a difference between interior and exterior door knobs?
Exterior door knobs have a much bigger job to do than interior ones. They’re the main barrier in most homes between the house and anyone who hasn’t been welcomed into it. An exterior door knob needs to be strong, reliable, and have a lock that works well.
How many types of door locks are there?
All Locked Down
There are plenty of other door locks and many fall within the five categories of knobs, deadbolts, cam locks, padlocks and mortise locks. For example, lever handle door locks are used for inner doors and work much like knob locks.
Are bathroom door locks a standard size?
Bathroom door locks are generally required for privacy rather than high security. Standard case sizes for full bathroom locks are 63/64mm and 75/76mm. The 63/64mm size tends to more widely used, however sometimes the design of your door may require a different size.
What size is a standard door knob hole?
2 1/8"
The Bore hole is the large diameter hole where the door knob is mounted. The standard sized bore hole is 2 1/8″ in diameter.
What is a Euro lock handle?
Euro Key Profile – This is an over sized key hole shape that is designed to accommodate a Cylinder Lock rather than the key itself. The Cylinder passes through the door handle, or escutcheon, into the lock case inside the door and back out through the door handle on the other side of the door.
What is case size on a lock?
The case depth is often simply stated as the ‘lock size’. There are many different case depths but the most common sizes are 64mm and 76mm. This is the metric equivalent to 2.5″ and 3″ lock cases from back in the imperial days, you may well have heard the term “3 inch lock case” and so on..
What is a backset?
The backset is the distance from the edge of the door to the spindle mechanism on the latch. Usually for a 63mm case measurement it will have a 44mm backset and for a 76mm case measurement will have a 65mm backset. The backset you choose is where your door knobs will sit on the door (where the spindle goes through).
Contents