A trolling motor shaft can be too long. If the trolling motor shaft is too long, you risk the propeller hitting bottom or the inability to stow the motor properly. Too long of a shaft can not only damage the propeller but also the rest of the motor and the environment beneath the water as well.
Does shaft length matter on trolling motor?
Selecting The Proper Trolling Motor Shaft Length Is Critical
It will help ensure that the motors’ shaft is long enough to keep the propeller submerged at least 12″ below the water line in your specific fishing conditions.
Can I put a longer shaft on my Minn Kota trolling motor?
While it would be cost-prohibitive to lengthen the shaft of any trolling motor, yes, in some cases the shaft of a trolling motor can be shortened. Only models from the below motors families are capable of having their motor shafts shortened: Endura.
How long is my trolling motor shaft?
Measure down from the mounting surface of the transom or bow to the water level. Add 5″ to waterline measurement for fishing in rough water. Add 12″ to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables below to find the appropriate trolling motor shaft length.
How is shaft length measured on a trolling motor?
The shaft length on a trolling motor is measured from the base of the motor head down the the top of the motor compartment.
How long should a transom trolling motor shaft be?
between 30″ to 42″
For transom motors, shaft length is generally between 30″ to 42″, depending on boat length.
How does Minn Kota measure shaft length?
Measure down from the mounting surface of the transom or bow to the water level. Add 5″ to waterline measurement for fishing in rough water. Add 12″ to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables below to find the appropriate shaft length.
How far should my trolling motor be in the water?
A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.
Can you shorten Terrova shaft?
Cut the amount off you want. Be careful not to cut any wires when cutting the shaft. I used a small metal pipe to slide down in the shaft to keep from cutting the wires. After cutting the shaft shorten the wires and put the head back on.
How big of a boat can a trolling motor push?
Trolling Motor Thrust Guide
| Boat Weight (lbs) | 1,500 | 2,500 |
|---|---|---|
| Boat Length | 14-16′ | 18′ |
| Minimum Thrust | 55 | 70 |
| Performance Thrust* | 55 | 80 |
| Motor Voltage | 12v | 24v |
What is the diameter of a Minn Kota trolling motor shaft?
1 1/8"
The Bullnose Rudder clamp fits a perfect 1 1/8″ diameter shaft which is a very standard measurement for many trolling motor companies. If the shaft measures a little slimmer,… see more. The Bullnose Rudder clamp fits a perfect 1 1/8″ diameter shaft which is a very standard measurement for many trolling motor companies.
How many pound trolling motor do I need?
General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.
What is a short shaft boat motor?
Short vs.
Generally, short shaft outboards are 15 inches, long shaft outboards are 20 inches, and extra-long outboards are 25 inches. Since the length of the shaft of your outboard is associated with the size boat, smaller engines will generally have shorter shafts.
How deep should my prop be in the water?
If you have a short shaft motor, the top most part of the transom and the lower most part of the boat should be about 15 to 16 inches. For a long shaft, I think 20 to 21 inches is correct.
How can I make my trolling motor faster?
Make Your Trolling Motor Faster
- Make Your Trolling Motor Faster.
- Change the Battery.
- Reduce the Load of the Canoe.
- Fix a more Streamlined Propeller.
- Put on Lighter Attire.
- Replace the Existing Motor.
- Conclusion.
How fast will an electric trolling motor go?
The maximum speed of a trolling motor is 5 mph regardless of how many pounds of thrust.
Can a trolling motor push a pontoon boat?
But, you might be wondering if a trolling motor is appropriate for your pontoon boat. The good news is that, yes, you can, indeed put a trolling motor onto a pontoon boat. As long as you select the right shaft length and thrust (minimum 52 inches length and 55 lbs thrust), you should be good to go!
How is shaft length measured on a golf club?
In today’s terminology, the “length” of a golf club is not the length of the shaft, but the length of the shaft and the club-head combined. Essentially, we are measuring from the sole (bottom) of the golf club (while it is sitting completely flat) to the end of the grip.
How fast will a 55 lb thrust trolling motor go?
Assuming perfect riding conditions, the use of the best fuel i.e. the distillate marine diesel, and moderate load, 55-pound trolling motors are likely to attain a maximum speed of only 5 miles per hour. This would take around two hours for the deep cycle battery charge to get completely depleted.
How do you shorten the shaft on a Minn Kota Powerdrive?
Pretty simple, four phillips screws removes the top cover and a 3/16 machine screw holds the head to the shaft. Then using some masking tape I wrapped the shaft where I wanted it cut, then dropped down 1/2″ and put another wrap of tape as a cut guide.
What is the strongest trolling motor?
Minn Kota
Minn Kota has introduced the most powerful trolling motor on the market featuring 112 pounds of thrust.
Contents