Top positive review These ball joints are well made, and last 100k miles on a truck that sees many miles of dirt and rough roads. The boots are tough, and keep grease where it belongs, but will vent a little when you re-grease them. They have out lasted other brands I tried, in the same application.
Who makes TTX ball joints?
Mevotech
Ships from and sold by Newparts. Only 1 left in stock – order soon. Ships from and sold by Sixity Auto.
Product information.
| Manufacturer | Mevotech |
|---|---|
| Product Dimensions | 4.4 x 4.9 x 5.3 inches |
| Item model number | TXK6541 |
| Manufacturer Part Number | TXK6541 |
Where are Mevotech ball joints made?
Ans: Some Mevotech parts are China-made and may even feature the tag ‘Made in China. ‘ However, this does not mean that they are of poor quality, as many people may assume. When you look at the quality of the replacement parts and their durability, you will appreciate it.
Is Mevotech better than Moog?
Well, Mevotech tie rods are actually pretty good. They outperform OEMs and are cheaper than MOOG without sacrificing any quality. Sturdy, easy to install, on a fantastic price. A stellar choice for your tie rod needs.
Do TTX ball joints come greased?
Yes. Mevotech parts come pre-greased right out of the box.
Where is Moog made?
After a search of our Moog inventory, we found out that Moog makes their parts everywhere from Japan… and of course, the United States of America.
Are TTX ball joints directional?
TTX Ball Joints
The directional bearing design features a sintered metal bearing inside a directional housing to provide additional contact area and greater pressure distribution. That decreases wear and extends ball joint service life.
Are Mevotech TTX ball joints good?
Top positive review. These ball joints are well made, and last 100k miles on a truck that sees many miles of dirt and rough roads. The boots are tough, and keep grease where it belongs, but will vent a little when you re-grease them. They have out lasted other brands I tried, in the same application.
Is Mevotech ball joints any good?
I would highly recommend Mevotech brand ball joints to anyone. The quality of the construction and hardware is very high. Even the rubber boots look good and don’t leak the grease out when you fill them up after install. I had crappy Drive Works Advance house brand on there before and they where shot in 1.5 years.
Are Mevotech bushings any good?
5.0 out of 5 stars Great quality parts. I ordered these for my 2009 ram 1500 along with some other Mevotech parts. My ball joints were getting real loose along with the tie rods. The quality of these control arm and ball joints are amazing.
Which is better Moog or Dorman?
Dorman is fine for a daily or mainly OEM car. They are sort of like the step up from ebay parts. I never had any issues with them when not abused. Moog is higher end quality (probably one of the few companies that surpass the direct from Honda stuff), but it comes with a price.
Are Moog ball joints good?
Moog lower ball joints are working great , because they are greasable!!! The whole reason I went with Moog to begin with…with regular maintenance they should last a lifetime.
Does Moog make good ball joints?
Ball joints: Definitely MOOG with their K-series ball joints like this one. The powdered metal gusher bearing design is a groundbreaking improvement, and they’re easier to service. Best for its price range, stellar Problem Solver performance. Serviceable, well-powdered and sturdy!
What happens if you don’t grease your ball joints?
Grease is good for noise and maintenance but no amount of it will bring a failed ball joint back to life. If you find that you have a failed ball joint we offer Moog upper and lower ball joints for many makes and models.
Which is better sealed or Greasable ball joints?
Bottom line on strength: The non-greaseable joint is slightly stronger than a greaseable joint. The exact number, how much stronger, is unknown and we do not believe it to be very significant. Bottom line on wear life: A regularly greased greaseable joint will outlive a non-greaseable joint.
What is the best grease for U joints?
7 Best Grease for U Joints
- Lucas Oil 10301 Heavy Duty Grease. Check Price.
- Red Line 80402 Synthetic Grease. Check Price.
- Valvoline General Purpose Amber Grease. Check Price.
- Quicksilver 8M0071841 High-Performance Extreme Grease.
- Mobil 1 Synthetic Grease.
- Grease-U-Joint, Premium Moly.
- Mystik 665005002901 Hi-Temp Grease.
Where are RockAuto parts made?
RockAuto has parts from a number of different manufacturers, so they will be made in a number of different countries. Although it’s difficult to say, most parts stocked at RockAuto are likely to come from Mexico or China.
Are RockAuto parts made in China?
About the same as other aftermarket suppliers. Rock Auto doesn’t make the parts and they have access to the same suppliers that other retailers use. Even ‘OE’ parts may be sourced from China and other overseas manufacturers.
Who bought out Moog?
Federal-Mogul Corporation
Federal-Mogul Corporation purchases MOOG Automotive from Cooper Industries.
How long do kryptonite ball joints last?
Registered. Cognito ball joints only last 30-70k if you actually use your truck like a truck. Not over cranked and not with massive tires. I have replaced them what I consider prematurely on every set of arms I have installed.
Does it matter which way a ball joint goes in?
These marks indicate which way the ball joint has the largest amount of swing and must point outboard, toward the wheel of the vehicle when installed. Failure to install a directional ball joint in the correct orientation could result in damage to the ball joint due to over travel of the ball stud.
Contents