Whether your lock is broken and needs replacing or you’re just ready for an updated look, mortise locks are generally simple to remove and replace; standard mortise lock replacement parts made by Emtek, Juralco, Pado, Papaiz or new-style Wright are easily interchangeable.
Are all mortise locks the same size?
There are two sizes of mortice locks: 21/2 and 3. If you are installing a mortice lock to a door with a narrow frame, or any door for that matter, it’s very important to know what size lock you need.
Are Mortice locks a standard size?
Standard Case Depth sizes are 64mm (2.5″) and 76mm (3″) and standard Lock backset sizes are 44mm and 57mm, a 50mm case size is also available for doors with a narrow stile or aluminium doors. Other lock measurements although important are not so critical, these include Case Height, Forend Length and Width.
How do you measure for a replacement mortise lock?
For a Mortice Deadlock you should only require the measurements of the Backset or the Case. This is the measurement from the front plate to the back of the lock case or the back of the slot the lock fits into in the door. If you have the old lock this measurement can be easily taken with a ruler or tape measure.
Can you reverse a mortise lock?
On a mortise lock, the curved side of the latch needs to meet the striker plate on the door jamb when the door is closed. However doors may be hinged on the left or right so the latch as supplied may not be suitable. It is fairly simple to reverse the latch in a mortise lock to suit any application.
When did they stop using mortise locks?
Two of the main differences between mortise locks and tubular locks are size and function. Additionally, each lock assembly type is made of up different parts to distinctly set them apart. Mortise locks were typically used before 1950, and tubular locks after 1950.
How do I measure for a replacement door lock?
Measure from the outside edge of the door (including furniture) to the centre of your door. This is dimension A and is called the External Size to Centre. Next, measure from the inside edge of your door (including furniture) to the centre of your door to find dimension B, the Internal Size to Centre.
Are all door locks the same size?
In the United States, there are two common backsets for residential door locks: 2 3/8 inches and 2 3/4 inches. Pack your locks with a 2-3/8-inch or 2-3/4-inch latch, depending on which backset you specify. Dummy sets have no latch and are surface-mounted so you can install a dummy set wherever you choose on the door.
How can you tell a 5 Lever Mortice lock?
How to identify a five lever mortice lock
- The words ‘5 Lever’ engraved on the internal faceplate of the lock.
- Mostly found on wooden doors. You can’t fit them to uPVC, aluminium or composite doors.
- Locks and unlocks from the inside and outside with a key.
- The lock sits within the frame of the door.
What is the case size on a mortice lock?
Standard Case Depth sizes are 64mm (2.5″) and 76mm (3″) and standard Lock backset sizes are 44mm and 57mm, a 50mm case size is also available for doors with a narrow stile or aluminium doors. Other lock measurements although important are not so critical, these include Case Height, Forend Length and Width.
What is a reversible lock?
Also found in: Encyclopedia. a lock that may be applied to a door opening in either direction, or hinged to either jamb.
Why are mortise locks better?
Mortise locks are one of the most secure forms of residential hardware available today. What makes mortise locks so much more secure than their cylinder counterparts? A pocket cut into the short edge of the door, allows a longer and thicker mortise box to slide into the door itself, providing superior protection.
How do you measure a tubular Mortice lock?
An easy way to choose which latch you need is to measure from the edge of your door to the centre of your door Stile. Choose the Backset which is closest to this measurement, and the handle will be as central as possible to the Stile on your door.
What is a backset?
The backset is the distance from the edge of the door to the spindle mechanism on the latch. Usually for a 63mm case measurement it will have a 44mm backset and for a 76mm case measurement will have a 65mm backset. The backset you choose is where your door knobs will sit on the door (where the spindle goes through).
What is backset size on a lock?
The backset is the horizontal distance from the edge of a door to the centre of a lockset; thus, the distance a lockset is ‘set back’ from the edge of a door is called its backset. It’s usually 1 inches or 2 inches (or 44mm and 57mm).
Can Home Depot rekey a lock?
Home Depot does rekey doorknobs, cylinder, and deadbolt locks at selected store locations. Customers can expect to pay $5 to $50, and Home Depot will rekey locks purchased from the store or other retailers/brands, including Schlage and Kwikset locks, provided you can offer the correct keys.
Can you buy multiple locks with same key?
When purchasing more than one lock, look for packages that have the same key alike number on the package. Alternatively, our store associates can key all of your locks to work with the same key. You can also purchase a rekeying kit to swap out pins and springs yourself.
What are the 7 types of locks?
The Many Different Types of Locks
- Padlocks. One of the most common lock types around, padlocks are also among the most recognizable locks on the planet.
- Deadbolts.
- Knob Locks.
- Lever Handle Locks.
- Cam Locks.
- Rim/Mortise Locks.
- Euro Profile Cylinders.
- Wall Mounted Locks.
What is the difference between a rim cylinder and a mortise cylinder?
The main difference between the two cylinders is the tailpieces and how they fit into the lock. Mortise cylinders have a threaded exterior and a cam. And rim cylinders have bolts and a stem that projects out into the door.This knowledge will benefit you when you are looking to service or replace your locks.
What is the diameter of a mortise cylinder?
29.37 mm
Mortise Cylinder Features
Body: Brass, 1-5/32″ (29.37 mm) diameter.
Are lock cylinders standard size?
as
Single or half Euro Cylinder locks typically range from 40mm to 50mm, whilst Euro Cylinders range from 60mm up to 120mm as standard, equal lengths from the central cam. For example, an 80mm length standard Euro Profile Cylinder lock will measure 40mm either side of the operating cam.
Contents