HSS bits can be used to drill iron, steel and other metals such as brass, copper and aluminum alloy. They can also be used to drill plastic.
Can you drill steel with HSS?
As mentioned above, you can use high-speed steel (HSS) drills. Typical drilling is with an twist drill, core drill or hole saw, in the tool steels HSS, HSS-Co 5 and tungsten carbide. Hole saws can also be used as they do not drill fully into the workpiece like core drills.
What is the toughest drill bit for metal?
Cobalt (HSCO) is considered an upgrade from HSS because it includes 5-8% Cobalt blended into the base material. This is a great option for drilling into harder steel as well as stainless steel grades. Carbide (Carb) is the hardest and most brittle of the drill bit materials.
Can HSS drill bits be used for stainless steel?
Material. Stainless steel is an extremely hard material. Low-carbon steel bits, like those used to drill into wood, do not perform when applied to stainless steel.High-speed steel, also known as HSS, is the most common drill bit for metal applications.
What kind of drill bit is best for metal?
Regular drill bits can’t cut through steel, so you need a heavy-duty, hard drill bit to do the job. There are two types of drill bits that you can count on for metalworking projects: titanium and cobalt. Titanium drill bits are high-speed steel drill bits (HSS) that have a titanium oxide coating.
What will drill through HSS?
HSS bits are hardwearing and heat resistant. The large concentrations of chrome and nickel in stainless steel ensure that HSS bits are super strong and durable. HSS drill bits are capable of safely drilling through hardwood, some metals and plastic.
What is a HSS drill bit?
high speed steel drill
HSS drill bits, an acronym for high speed steel drill bits are extremely hardwearing and particularly well designed for drilling into metal surfaces, as they are much more resistant to the heat generated from the fast speed operation.
Can you use HSS drill bit masonry?
High-speed steel (HSS) drill bits can drill wood, fiberglass, polyvinyl chloride (PVC) and soft metals such as aluminum.Carbide-tipped drill bits stay sharp much longer than steel, HSS or titanium bits. They’re effective for drilling tile and masonry.
Can hardened steel be drilled?
Go to a hardware or home improvement store for a cobalt bit that is designed specifically for drilling through steel. You want a cobalt bit, as it’s a type of high-speed steel (HSS) that has more cobalt in it and is strong enough to cut through hardened steel.
How do you drill through thick metal?
In general, it’s a good idea to drill through metal using as slow a speed as possible using a drill bit for metal. Hard metals like steel and larger drill bits require even slower speeds. With a small twist bit (1/16 in. to 3/16 in.), you can drill through most metals at 3,000 rpm.
Which drill bits are better titanium or black oxide?
Compared to titanium drill bits, both black oxide and cobalt drill bits are better. In addition to being non-corrosive, durable, and fast like titanium bits, cobalt and black oxide bits can be re-sharpened. While titanium drill bits have more or less the same uses as black oxide, the latter is much cheaper.
When drilling metal Should I use oil?
If you’re a handyman, any old oil you have laying around is better than none: motor oil, machine oil, ATF, WD-40, whatever. Don’t use something super flammable with a low flash temperature.
What is a jobber drill bit?
A jobber drill bit is a bit that has a long length compared to its diameter. Jobbers have a length anywhere from 8-12 or 9-14 (depending on who you ask) times the diameter.
What are Brad point drill bits used for?
Brad point drill bits are specially designed to drill and bore clean holes in hard and soft woods without wandering. These drill bits have been designed with a center pin as seen in the images below and on the right. A Brad Point Drill Provides a clean, straight, and accurately sized hole in wood.
What is the difference between SDS and HSS drill bits?
HSS drill bits fit into any standard chuck, either with a key or the keyless type. SDS+ fit into a special chuck with a groove on one side for the bit to fit into ( there’s no physical tightening of the chuck as it’s a positive lock on these) SDS Max is a variation of the last one but it’s a lot bigger than SDS+.
What is the difference between HSS and HSS-G?
The main difference between HSS-E drills and HSS-G drills is the cobalt alloy (5% or 8%). The material in HSS-E tools is of higher quality and is at the same time extremely heat resistant, meaning that materials with high tensile strength can be machined – ideal for stainless steel.
Will HSS drill concrete?
Standard HSS or Cobalt twist drill? No..they will absolutely NOT work in concrete.
Can you use brass drill bits on metal?
1) Metal drill bits
Metal drill bits with a partially ground tip are suitable for non-ferrous metals. These include aluminum, copper, brass, zinc, iron and non-alloy steel. Drills made of cobalt-alloy High Speed Steel (HSS-E) or even drill bits with a titanium coating are needed for stainless steel.
Can you use HSS drill bits for tiles?
It’s highly unlikely that tiles will have been installed atop of metal or alloys but there could be some metal struts or supports behind the substrate – if you need to drill into them then a standard high-speed steel (HSS) drill bit should do the trick.
Why can’t I drill through metal?
Drilling into a hard surface requires the use of specialized drill bits. Regular drill bits are not designed to cut through metals. Therefore, they can easily wear away. So you need hard bits which can drill through metals without being damaged.
Can you use wood drill bits on metal?
It does matter – wood drill bits won’t work on metal (destroying the bit in the process, unless used on thin and soft metals) and metal drill bits will increase splintering and tear-out when used on wood (but this depends also on the wood type and the diameter of the bit, and for smaller diameters there is little
Contents