Are All Door Spindles The Same Size?

The modern industry standard cross-section thickness size of a door handle spindle is 8mm (5/16″) square. This size has become the standard size for modern spindles. It should be noted however; spindles and followers were not always standardized to 8mm.

How do you measure a door handle for a spindle?

To find the spindle length of your handles measure the bit that sticks out from the back of your handle as shown on the photo to the left.

How do you replace a door spindle?

Use a simple procedure to replace a broken spindle.

  1. Open the door part way.
  2. Locate the small setscrews or hex bolts at the inner portion of each door knob.
  3. Pull out both sections of the broken spindle from the door lock.
  4. Fit one end of the new spindle fully into the square port at the inner end of a door knob.

Are all door Handlesets the same size?

Levers and handlesets usually need a hole 2 1/8 inches in diameter.The most common are 2 3/8 inches and 2 3/4 inches, but some hardware can fit multiple backsets. Make sure the hardware you select fits your door. For more help, see Determine the Backset of Your Door.

Are door handle spindles a standard size?

The modern industry standard cross-section thickness size of a door handle spindle is 8mm (5/16″) square. This size has become the standard size for modern spindles. It should be noted however; spindles and followers were not always standardized to 8mm.

How do I know what size door handle I need?

Measure from the edge of the door to the centre of the door knob or handle. The industry standards are usually either 44mm / 57mm / 82mm / 107mm / 130mm. Ideally you will try and choose the backset measurement that sites the door handle in the middle of the door stile.

See also  Why You Should Stop Using Passwords And Start Using Passphrases?

Can you cut a door spindle?

It is simply necessary to hold the spindle in a vice and cut it down with a hacksaw, but be sure not to cut it too short. Whilst in use, plain spindles can move out of their location holes in the back of one handle into the opposite handle.

What is a split spindle for?

The split spindle is designed to replace the solid spindle of a door handle allowing the external handle to operate the lock mechanism with a cylinder key only. The inside the handle can be operated as normal for a quick and easy exit.

How do you open a door with a broken spindle?

Use the screwdriver to push the opposite side of the doorknob from the door and latch. Pull the spindle from the center of the latch if applicable. Thread the screwdriver through the large spindle hole in the latch. Pull the screwdriver away from the jamb to retract the latch and release it from the latch strike.

How does a split spindle door handle work?

Inline Split Spindle Door Handles
The lockcase is designed in such a way that the central drive where the spindle fits into can operate independently each side. In other words one spindle can turn the lock while the other spindle doesn’t move. A spring pushes the spindle into the middle to engage.

What is the standard size hole for a door knob?

2 1/8"
The Bore hole is the large diameter hole where the door knob is mounted. The standard sized bore hole is 2 1/8″ in diameter. Through the edge of the door there is a 1″ cross bore that extends from the edge of the door through the bore hole.

See also  Is Verisure Safe?

What are the different types of door handles?

There are three main types of door handles: lever handles, pull handles and door knobs.

Can you use an interior door handle outside?

Can these internal handles be used on a front door or exterior door? You can use them on an exterior door, and many people do, but the longevity of the handle with respect to resistance to weathering is not as strong as needed.

What length are stair spindles?

Cut string staircases leave the stair treads and risers exposed, and the spindle sits directly on the stair tread. For this style you will need two spindles on each tread. The front spindle should be 900mm long and the back spindle 1100mm.

What is a Taylors spindle?

A Taylor spindle is also known as a Dummy spindle is used where a knob or handle is required to be fixed dead.In this manner, the knob or handle are pulled to open the door. Usually, this arrangement will be used in conjunction with a roller ball latch.

Are bathroom door handles universal?

Bathroom door handles are different from regular internal door handles in that they feature a lock that can only be turned from the inside of the room, providing extra privacy for the user. Bathroom door handles with locks are available in a number of styles and finishes and are essential for every home.

Can you change a door handle without changing the lock?

If you have a doorknob on a bedroom door or another interior room of your home that doesn’t have a lock, the only way to fix this issue is by replacing the knob. If you want to leave the old knob, you’ll have to add a latch lock that will hold the door in place.

See also  What Case Is Minerva?

What is a door handle spindle?

A spindle is a rod of metal, square in section, that is used to connect two door knobs together. It passes through the mortice latch or tubular lock (located within the door) and the two handles slot on either side of the door.

What is a door latch?

Door latches are a type of mechanical hardware used to fasten doors and keep them shut. A door latch uses a fastener attached to two ordinarily separated surfaces, most often the door and the frame, to prevent the door from swinging while still allowing normal operation when the latch is released.

What is a single spindle door lock?

If you are able to open the door without the key then this will be a single spindle operation, also known as lever lever. Single spindle locks will usually have a solid spindle bar inside the handles and both the handles will be level at the same height.

What is split spindle lever?

Split spindle locking is visually the same as the lever handle locks, with a lever handle inside and out, the difference being the handles work independently of each other. PROS – If you close the door from inside it locks on the latch, so no one can enter.

Contents

This entry was posted in Smart Lock by Warren Daniel. Bookmark the permalink.
Avatar photo

About Warren Daniel

Warren Daniel is an avid fan of smart devices. He truly enjoys the interconnected lifestyle that these gadgets provide, and he loves to try out all the latest and greatest innovations. Warren is always on the lookout for new ways to improve his life through technology, and he can't wait to see what comes next!