How Do I Add Reolink To My Computer?

Install Reolink Client (Windows)

1. Applies to: All Reolink Products.
2. Download the Reolink Client in Download Center.
3. Unzip the installation package and double-click to install the software.
4. Click Yes to allow this App to make changes to your device.

How do I connect my Reolink to my computer?

How to Connect Your Cameras Directly to the PC and Log in via Windows Client

1. Please power on this camera and then connect it directly to your PC with a network cable.
2. Open Reolink Client, then click Add Device -> Scan Device In LAN to find the IP address of your camera.

Can I view my Reolink on my computer?

On the computer, launch the surveillance software to add the camera and watch live view directly. In our test, we open Reolink Client. Since the computer and the camera are in the same network, Reolink Client automatically searches and displays the camera directly. Click ”Start” and you can view the camera on PC.

How can I view Reolink NVR on my PC?

For Reolink PoE NVRs, the web browser remote access is available via IE browser, Firefox, Chrome.

1. Find the IP address of your PoE NVRs.
2. Log on to your router and forward ports for your PoE NVRs.
3. Input the URL into the web browser and log in to view the camera live.

How do I download Reolink app?

Search “Reolink” in App Store (for iOS), or Google Play (for Android), download and install the app. 2. Scan the QR code below to download and install the app.

How do I connect my camera to my desktop?

Most webcams have a USB cable connected to them. Plug the USB cable into an available USB port on your computer. USB ports are on the back of the computer or the sides of a laptop. Newer operating systems, like Windows 8 and Windows 10, should recognize the webcam as connected.

How do I connect my wireless camera to my computer?

How to connect a wireless camera to your computer?

1. Plug your wireless security camera’s power adapter into an electrical outlet to turn the camera on.
2. Log on to your PC.
3. Open any standard web browser on your computer and enter the IP address of the camera into the address bar at the top of the window.

How do I install Reolink camera?

Launch Reolink App, click “+” on the top right of the Devices page to add a new device. Step 2. For local access, we recommend you to add device by scanning the QR code. Note: You may tap Light to enable flash light when setting up in a dark environment.

Where is my Reolink camera on my network?

For example, you may easily find the Reolink camera addresses via the following steps:

1. Enter the gateway IP address of the router.
2. Check the IP camera MAC address via the camera software.
3. Go to the WiFi setting page > DHCP server page and find the IP camera address according to the camera MAC address.

Where is Reolink NVR IP address?

You may locate their default IP address when connecting your device directly to your PC with an internet cable. Step 2. Connect the camera directly to your PC with a network cable. You will find the default IP Address of your devices like the example below.

Why won’t my Reolink camera connect?

Click Add Device->Scan in LAN to see whether the camera shows up. For the mobile app, please check whether it has a firewall or APN settings, and disable the APN to add again. If still fail to add, please try to reboot this camera and your home router network or hard reset this camera and set up from factory status.

Why is Reolink not connecting?

Make sure that you choose the same Register Mode as Reolink App. Check whether your computer has been connected to Internet successfully. Check if the computer’s firewall has been configured properly. If you haven’t set the VPN, please also close the VPN on your computer.

Does Reolink work on Mac?

Reolink Client is an easy-to-use security camera system surveillance software. It enables you to locally or remotely access your IP cameras and NVRs on Mac computers.Remotely monitor and watch live streaming on Mac anywhere and anytime.

Is Reolink a Chinese company?

Another Chinese disruptor, Reolink, is gaining attention. This one is selling direct from its own website, with fulfillment by Amazon. And a number of their prices make Dahua and Hikvision look downright expensive.

How do I log into Reolink app?

Reolink default username is admin and the default password is blank(no password). If you forget the password, you may choose to reset your device. Note: For Reolink NVRs, you may press the reset button or use super-password to reset the admin password to default.

How do I find the webcam on my computer?

How to Test My Webcam (Online)

1. Open your web browser.
2. Type webcammictest.com into your browser’s address bar.
3. Click the Check My Webcam button on the website’s landing page.
4. When the pop-up permission box appears, click Allow.

How do I connect my webcam to Windows 7?

In the Control Panel window, click System and Security. In the System and Security window, under System, click Device Manager. In the Device Manager window, click the arrow next to Imaging Devices to expand the selection. Under Imaging Devices, click to select Sony Visual Communications Camera.

How do I connect my camera to my laptop Windows 10?

Untie the USB cable, plug the cable into your computer, and balance the camera on your monitor. This is a plug-and-play device. After plugging in your camera, Windows 10 will have a pop-up that says “Setting up a device”. After that, a pop-up will say that the device is installed and configured.

Can I connect IP camera directly to PC?

You can connect your IP camera directly to a PC via network cable as long as you have a power supply to power up the camera and minimum skills for the setup.

How do I connect my camera to my laptop for live streaming?

Steps to setup live streaming

1. Connect one end of the HDMI cable to the camcorder HDMI output and the other end of the cable to the HDMI input of the video capture device.
2. Connect the video capture device to the computer using the USB cable.
3. Turn on the camcorder by moving the POWER switch to the CAMERA position.

How do I install Reolink wireless camera?

How to Set up WiFi for Battery-powered Cameras via Reolink App

1. Launch Reolink App and log in to the battery-powered camera, then go to Settings->Network page.
2. Select the SSID (network name) you would like to connect the camera with.
3. Input the password, then click Save to save the settings.