Understanding the specifications
- 1st digit – Voltage. 1-2 = 6 Volt Battery. 5-7 = 12 Volt Battery.
- 2nd & 3rd digits – Nominal capacity. 560 = 60Ah @ 20 hour rate. 660 = 160Ah @ 20 hour rate.
- 4th & 5th digits – The unique code number referencing battery performance and features.
What do the numbers mean on a battery?
Date Code: Most batteries have a date code, usually a long string of numbers and letters that show when the battery was purchased. One row of one- or two-letter codes indicates the month, the other row of numbers is the last digit of the year.
How do you read battery specs?
The battery’s capacity is measured in Ampere-hours (Ah) on the X axis and is the product of the current consumption x the hours to discharge the battery down to 2.0 V. Ah= Current X Hours to Discharge down to 2.0 V.
What do the numbers and letters on a car battery mean?
This refers to the battery size that will best fit the physical dimensions, terminal locations and type required for your vehicle. The Battery Council International (BCI) assigns numbers and letters for each battery group size. Group size is typically based on your vehicle’s make, model and engine type.
What should a 12-volt battery read when fully charged?
about 12.6 to 12.8 volts
A fully charged battery will typically display a voltmeter reading of about 12.6 to 12.8 volts. If your voltmeter is showing a voltage anywhere between 12.4 and 12.8, that means your battery is in good shape. Any voltage above 12.9 volts is a good indicator that your battery has excessive voltage.
What does N70 battery mean?
N70. Type of rechargeable battery that supplies electric energy to an automobile. An automotive SLI battery(starting, lighting, and ignition) powers the starter motor, lights, and ignition system of a vehicle’s engine.
How do you mark the date on a battery?
If there is no date sticker, the battery will have a strip, engraving, or heat stamp with a decipherable alphanumeric code. Typically found on the battery cover and sometimes on the battery itself, this code can be several characters long, giving the date information in the first two characters in the sequence.
What does the date sticker on a battery mean?
Many manufacturers use a date sticker on top of the battery to show the “in service” date. The sticker shows months and years, and the appropriate month and year are marked when you purchase the battery. This date showed when the battery went into service, and they calculate the warranty expiry date from here.
What type of battery do I have?
Check the Manufacturer’s Label on the Battery. Usually, all the batteries have labels and other information about the battery provided by the manufacturer. Hence, if the label on the battery is still in good condition, you will be easily able to figure out the type of battery.
How do you tell when a battery is fully charged on a battery charger?
What should a battery charger read when fully charged? If the needle sits at around 6 amps on a 12 amp charge setting, that indicates that the battery is fully charged. If you use a 2 amp setting, the needle will settle at the end of the small red triangle.
What should a 12-volt battery read under load?
A healthy 12 volt battery should maintain a voltage range from 9.6 – 10.5 volts under the load for a good 30 seconds straight.
How many volts is N70 battery?
12V N70 Dry Charged Car Battery
| Type: | Lead-acid Battery |
|---|---|
| Charging Voltage: | 2.25V~2.5V |
| Working Voltage: | 3.6V~2.75V |
| Charging Type: | Constant Voltage |
| Wet Shelf Life: | 2~3Year |
How many plates is N70 battery?
11 PLATES
BATTERY 11 PLATES N70 MOTOLITE.
What voltage is too low for a 12-volt battery?
The lifespan of your battery will be moderately affected if it remains within this voltage range for extended periods of time. 12.0 volts or below – At 12.0 volts your battery is considered to be fully discharged or ‘flat’ and should be recharged as soon as possible.
What is the voltage of a fully charged 12V lead-acid battery?
about 12.7V
A 12-volt lead-acid battery that is fully charged often provides a voltage of about 12.7V. If the lead-acid battery only has 20% left, it will only deliver 11.6V. A fully charged lithium battery delivers 13.6V but delivers 12.9V at 20%.
How long will a 12V 12ah battery last?
approximately 120 hours
The watts/volts are equal to the amps per hour. A tiny device such as led lighting of power 1.2 watts running on a 12volt power source will use 1.2W/12V = 0.1 amps. Therefore, a 12ah (amp-hour) battery will last for approximately 120 hours.
What does EN stand for on a car battery?
Exact Fit European Norm (EN) Design Batteries. Today’s automotive manufacturers build vehicles that demand battery replacements that meet specific Amp Hour (AH), Cold Cranking Amps (CCA) and Reserve Capacity (RC) ratings, cover designs, hold-down requirements, and critical venting systems.
How do you read a century battery date code?
The stamp on the bottom of your battery is when the case was made, not when the battery was built. The stamp on the top “A3DB” is the manufacture code. “A” is for afternoon shift, 3 is the day of the month, D is the month, and B is the year. So your battery was built by the afternoon shift on 3rd April, 2018.
How old is my everstart battery?
Determine the year in which the battery was manufactured by the number(s) that follow the letter. The number(s) indicates the year. For example, a “0” means the battery was manufactured in the year 2000, a “1” means it was made in 2001 and a “9” means it was made in 2009.
How do you read the date code on a universal battery?
The first letter refers to the month it was manufactured: A-L refers to January – December. The number refers to the year in which the battery was made. For example: 2 would be 2012, 3 would be 2013, 4 would be 2014, etc. The last letter refers to the plant in which the battery was made.
What does the green sticker on a car battery mean?
The little colored dot sticker is the date it was recharged. Wet batteries have a long shelf life if they are kept charged, and are usually charged once a month by the battery rep.
Contents