If Alexa says your ecobee device is not responding, it usually means your ecobee has lost connection to Wi-Fi. If the device in question is a room sensor, it usually means the sensor has lost communication with the thermsotat it is paired to.
Why is my ecobee unresponsive?
This is most likely happening because your ecobee is not connected to wi-fi or your ecobee mobile app. To check your ecobee’s wi-fi connection, from your ecobee select Menu > Settings > Wi-Fi > Wi-Fi Enabled > Network. If so, log in to the ecobee app and ensure your thermostat is connected.
Can you control ecobee with Alexa?
Both the SmartThermostat with voice control and ecobee4 thermostats, and the ecobee Switch+ come with Amazon Alexa built-in, which means you can control any Alexa-enabled device directly from your your thermostat or light switch.
How do I reset my ecobee?
How to Factory Reset an ecobee Smart Thermostat
- From the Home screen, press Menu.
- Select Settings.
- Go to Reset.
- Choose Reset All Settings then confirm your selection by pressing Yes.
- Choose the reset option that suits your needs:
- The ecobee thermostat will be reset to factory defaults.
Why is my Alexa saying try again later?
#1. Wait a few hours and then try asking Alexa something again. From time to time, Alexa can go down due to an issue on Amazon’s end. So if this is the first time you experience this error message from Alexa, you might just need to wait a little bit for Alexa to come back online.
How do I turn off ecobee Alexa notifications?
This can be done by taking the following steps:
- Open the Alexa app.
- Choose Settings.
- Choose Alexa Devices.
- Select the device you want to make changes to.
- Choose Communications.
- Toggle the button to turn Announcements on or off.
Is ecobee battery powered?
Your ecobee room sensor is powered by a single 3 Volt CR-2032 battery.
How do I turn on my ecobee fan?
3. Quick Changes
- Tap the Quick Changes menu icon (the gear icon with 3 lines on the bottom of the thermostat screen)
- Tap the Fan Hold button.
- Using the horizontal dial, select a preferred time duration for the fan to run in ON mode.
- Tap the < in the top left to leave the menu.
- Exit the Quick Changes menu.
Does ecobee thermostat have a battery?
The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.
Check the Microphone Button
The mic button is marked by a microphone symbol and can be found at the top of the Echo device.
How do I troubleshoot my ecobee thermostat?
Open the panel on your furnace to expose the control panel where your thermostat wires are connected. Most systems have a purple 3 or an orange 5 amp fuse on the boardcheck this fuse to ensure that it’s intact. A blown fuse will have to be replaced. Once a blown fuse is replaced, the ecobee should power back on.
How do I control ecobee with my voice?
Using the ecobee app to enable Alexa on your ecobee thermostat:
- Sign in to the app using your registered ecobee username and password.
- Select your thermostat, and tap the Microphone icon on the bottom-right corner of the screen.
- Tap Sign in with Amazon.
- Sign in with your Amazon account credentials.
What happens if I reset my ecobee?
If you choose to “Reset All,” your ecobee will be wiped clean and returned to factory settings. Your ecobee account will be deleted, as will your schedule, preferences, and equipment configuration. You will need to set up your ecobee from scratch once again.
How do I reconnect my ecobee to WIFI?
To connect your Ecobee thermostat to your Wi-Fi network:
- From the Home screen, press Menu.
- Then select Settings.
- Go to Wi-Fi.
- Make sure Wi-Fi Radio is Enabled.
- Go to Network.
- Tap on Select Wi-Fi Network.
- Pick your Wi-Fi network from the list and enter your Wi-Fi password if required.
- Tap OK to exit.
Why is my Alexa Having trouble?
See If Alexa Is Connected to the Right Network
Maybe you just moved homes and forgot to change the Wi-Fi network on your Alexa app for iOS or Android.To check if that’s the case, go to the Alexa app on your phone, go to Devices, select your Echo and look under Wi-Fi Network to see that’s connected to the right one.
Why is Alexa app not working?
Restart the Alexa app via its Settings menu and then relaunch the app. See if this solves your calling problems. Update the Alexa app on your iPhone or Android. If restarting and relaunching the app didn’t work, you may need to update the app.
Why is Alexa having trouble connecting?
Restart the Alexa-enabled device. Power off or unplug the Echo or Alexa-enabled device, turn it back on, then connect to Wi-Fi again. Sometimes this kind of physical reboot of an Alexa-enabled device can fix the problem. Confirm that the Wi-Fi password is correct.
Why does my ecobee keep chiming?
An Ecobee thermostat beeping is likely due to unread notifications from Alexa or a similar app. Reading or deleting the notification is the best way to get rid of the noise. If the sound persists, it may be due to electrical faults or coming from external sources outside the thermostat.
Why does my ecobee keep blinking?
All you have to do is to ask Alexa to clear notifications or read notifications. This should stop the flashing green light on your device. Alternatively, if you don’t have an Alexa device, you will need to manually check the notifications.
Why is the green light blinking on my ecobee thermostat?
My ecobee is flashing a green light! What do I do? This is Alexa letting you know that you have a notification. To check your notification and/or get rid of the flashing green light, just say “Alexa, what did I miss?” or “Alexa, delete all of my notifications” to your ecobee thermostat.
How do I know if my ecobee sensor is working?
1) Gently pull the plastic tab on the back of the sensor. 2) Look for a message on your ecobee’s screen. The 4-digit ID should match the 4-digit code on the back of your sensor. Tap Pair now to confirm pairing.
Contents