Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.TIP: If you could have a stud in your wall, use a 1/8? drill bit to check first. You will know if there is wood!
How do you hang a curtain rod without studs?
If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets. Without a drywall anchor, a screw won’t be able to hold the weight of your curtain rod. You risk pulling the brackets out of the wall and causing further wall damage.
Do I need drywall anchor for curtains?
You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver.Hang the curtains and double-check to make sure your brackets are still secure. Open and close to check that they’re functioning properly before finishing.
Can you hang curtains in drywall?
Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it’s not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.
Can you hang curtains without anchors?
Knowing which to use is very important without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. And if you try and use a drywall anchor in a stud, you’re just in for a world of frustration.Two of our three brackets went into studs. If you have dry wall, you’ll have to use an anchor.
How much weight can drywall hold?
Thin drywall will hold 1.2 to 1.6 pounds per square foot without some type of support. Thicker drywall will hold 1.5-2.1 pounds per square foot without additional support. Shear and tension affect the weight supported.
Are there always studs around windows?
In residential house framing, window and door openings will always have studs along their sides. In fact, they will usually have two doubled-up studs to make the opening extra sturdy.They are not necessarily 16 inches from the center of the adjacent studs.
How far are studs from window frames?
You may be asking, How far apart are studs? Typical stud spacing is 16 inches on center and even on older houses is rarely greater than 24 inches on center. Most electrical boxes for switches or outlets are attached to a stud on one side. There are studs on either side of a window.
Do I have to use anchors?
Because drywall is too weak to hang things from, a drywall anchor is necessary, explains Matt Michaels, a spokesman for Lowe’s Home Improvement in Charlotte, NC. The anchor essentially allows you to insert screws into the wall without causing the soft drywall to crumble around it.
How far should a curtain rod extend past window?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How can I hang curtains without a drill?
5 Easy Ways to Hang Curtains Without Drilling
- Use 3M Command Hooks.
- Try Kwik-Hang Curtain Rod Brackets.
- Use Tension Rods.
- Get Creative With Coat Hooks.
- Try Magnetic Rods on Metal Doors.
How do you hang heavy curtains on a drywall?
Use longer screws or nails
The best way to do this is to install the brackets with longer screws or longer nails. The extra length helps distribute the weight of the curtains further into the plasterboard, making it the joint sturdier than the screws used in traditional window installation.
How much weight can a curtain rod hold?
Divide the weight by the required rod width to get the amount of weight per foot and choose a rod, based on the manufacturer’s information, that will accommodate this weight. For example, if the curtains weigh 50 pounds, and the required rod width is 12 feet, the rod must hold just over 4 pounds per foot.
Do I need a stud finder?
It is commonly thought that you need to have a stud finder in order to find a stud in your drywall. But not all homeowners own a stud finder, and probably don’t need one often enough to justify the purchase.Most homes are built with 2×4 or 2×6 studs and studs can be found typically on the sides of windows or doors.
Can I use my iPhone as a stud finder?
The iPhone beeps when its magnetometer, in the upper right of the phone, is near metal. Stud Find is an iPhone application that uses the device’s built-in magnetometer to find metal studs, screws, nails and anything metallic in a wall.
How far are studs from corner?
16 inches
When a home is framed, the wall studs are usually spaced 16 or 24 inches apart. If you start in a corner and measure out 16 inches and you don’t find a stud, you should find one at 24 inches.
What is the proper height to hang curtains?
between four to six inches
A rule of thumb (from Architectural Digest) is that curtains should be hung between four to six inches above the window frame, so install your curtain rod accordingly. When you hang the curtain rod high, it will make the window appear taller.
Should you hang curtains to the ceiling?
Hanging your curtains at ceiling level maximizes the light that shines through your window and it makes the room feel larger because the walls look taller. This works well in a small space, but may not be ideal in a room that is already too large.
Should curtains go to ceiling?
The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.
Why can’t I find studs in my wall?
If you can’t find the stud even after drilling, there’s one more technique you can try: Grab a wire hanger and untwist it, fashioning it into a right angle. Use your new tool to fish around behind the wall, says Rothman. When the wire makes contact with a firm object, that indicates you’ve found a stud.
Can you use a magnet to find studs?
Stud Finders:
In many home projects, finding the studs hidden behind drywall can be a challenge. For a simple yet amazingly effective stud-finding solution, get a neodymium magnet. It can’t detect the wood two-by-fours, but it easily locates steel screws that hold the drywall to the studs.
Contents