Press and hold the Restart and the Reset buttons together for five (5) clock seconds, then release. The WeMo Light Switch Wi-Fi icon will blink to green then amber in color, indicating a successful reset. Step 2: Set up and sync your WeMo Light Switch with the WeMo App.
How do I reconnect my Wemo smart plug to WiFi?
Make sure that the Wemo device isn’t blinking orange (see the wifi light status indicator section). If so, try to restart the app. If this doesn’t work, try to unplug and plug your Wemo device again. Your wemo device will try to reconnect to your home network automatically.
How do I reset my old Wemo switch?
Step 1: Launch the Wemo app. Step 2: Tap Edit. Step 3: Find the Wemo device you want to factory restore and tap on the arrow to open the Edit Wemo screen. Step 4: Tap Reset Options.
How do I reset my wemo WiFi smart outdoor plug?
To reboot the Wemo Outdoor Plug, simply unplug it from the outlet then plug it back in.
When using a device with the Wemo Outdoor Plug, keep the following in mind:
- Do not exceed the maximum rated output wattage of 1800W.
- Make sure that the Wemo Outdoor Plug is powered OFF before plugging a device into it.
How do you reset a Moes Smart switch?
Press and hold the manual switch for 5 seconds, you can see the red indicator light blinks quickly. Then press and hold for 5s again until the indicator light blinks slowly.
How do I reset my Smart switch?
To reset the smart switch/plug to factory defaults: Press and hold the reset button until the Wi-Fi LED blinks amber rapidly (about 10 seconds) to reset the Smart switch to factory defaults.
How do I reset my smart plug?
Make sure the Smart Plug is plugged into a working power outlet, and press the button on the side of the Smart Plug. Hold the button until the LED light on the Smart Plug turns red. Wait for the LED to start blinking blue. When the LED blinks blue, the plug has been reset.
How do I reset my wemo 3 way switch?
Press and hold the LED bar on your Wemo 3-Way Light Switch and release until the light turns blue to reset the device. NOTE: The LED bar is the same as the Restart/Reset WiFi/Restore button.
How do I reset my wemo link?
Step 1: Unplug the Wemo Link. Step 2: Press the Restore button on the side panel and hold it down while plugging the Wemo Link into the power outlet. Keep holding the button for 5 seconds. Step 3: Check your smartphone for the Wemo Link’s default network name before you start the setup again.
How do I reset my wemo bulb?
Reset WeMo by Belkin
Switch your WeMo bulb off, wait a second (1) and then turn it back on and count 3 or 4 more seconds and flip it off. Repeat two times more. After that the bulb should flash at you a couple times. That’s your confirmation it’s been reset.
How do I reconnect my smart switch to Wi-Fi?
Use the App to Reconnect to Wi-Fi
After the switch is in discovery mode, open the companion app on your mobile device. Using the app will allow you to select your model and start the pairing process. The app should ask to connect to your Wi-Fi. Enter your credentials, and the switch should reconnect.
How do I connect my smart Wi-Fi light switch?
WiFi Smart Switch Instruction Manual
- Press ADD DEVICE and select SWITCH to set up a new.
- Mount the WiFi switch into a wall, the blue led indicator will flash quickly. If the light does not flash quickly, press and hold the button for 6 seconds the light will then flash quickly.
- Connection cycle will Appear.
- 100%.
Why does my Smart Switch keep going offline?
Smart Life devices go offline due to overloads in your router when your router renews the LAN/WAN IP address, or if there are errors stored in its cache. Solutions to this problem include clearing the cache or using a dedicated 2.4g WiFi router for Smart Life devices.
How do I reconnect my smart plug?
Smart Plugs
- Unplug and wait 10 seconds. Press and hold the button on the plug. While holding the button, plug into an outlet. For plugs with lights, release the button once you see the LED light up.
- Restart Discovery.
How do I connect my Alexa to Wi-Fi?
To connect to WiFi:
- In the Alexa app, open the left panel menu and then select Settings.
- Select Device Settings.
- Choose your device.
- Select Change next to WiFi Network and follow the prompts in the app.