How Do You Install A Yale Door Sensor?

Surface Mount Installation

1. Determine mounting location. For optimal performance, DoorSense™ should be mounted within 1.5 inches from the edge of your door frame, and should align with your lock’s smart module.
2. Attach mounting tape.
3. Place on door frame.
4. Screw into frame.
5. Attach the cover.
6. Calibrate your Lock.

How do I install Yale Access Module?

Installing the Module

1. Remove battery cover. Using a Phillips-head screwdriver, loosen the battery cover screw.
2. Remove a battery.
3. Insert the module.
4. Replace the battery.
5. Replace the cover.
6. Registering the Module.
7. Set up your lock in the Yale Access App.
8. Set up the Yale Connect Wi-Fi Bridge.

What is door sense for Yale lock?

DoorSense™ is Yale Home’s newest feature and technology that lets you know if your door is open or closed. Now, you’ll know if your door is both closed and locked ensuring that your home is secure.

How do I install Smart Lock Yale?

1. Install Nest x Yale Lock.
2. Remove your old lock. Remove the current lock and strike plate if you have one already installed on the door.
3. Install the deadbolt.
4. Install the strike plate.
5. Install the keypad on the outside of the door.
6. Install the mounting plate.
7. Install the lock.
8. Test and set up your lock.

What is Yale Access Module?

The Yale Access module allows a user access to a better Bluetooth experience. The Yale Access app and Yale Access Kit add – Unlock on arrival, door position sensing (when DoorSense is installed) and remote access via the Yale Connect Wi-Fi bridge.

How do I set up a Yale Bridge?

In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

How do I calibrate my door sense?

Calibrate your Lock
Once the lock is set up, navigate to the Lock Settings and select Calibrate Lock and select LOCK AND DOORSENSE™. Follow the instructions in the app until you have successfully calibrated your August Wi-Fi Smart Lock and DoorSense™ together.

How do I add a Yale lock to my Yale app?

Open the Yale Secure app and create a new home by tapping the + icon in the top right corner. Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device.

How do I setup my Yale Access kit?

In four simple steps, you will be able to access new features within minutes:

1. Step 1: Install the Yale Access Module into the back of an Assure Lock.
2. Step 2: Install the door sense to your door jam.
3. Step 3: Plug in the Yale Connect Bridge to your power socket.
4. Step 4: Download the Yale Assure App.

Do Yale locks work with August app?

Yale Assure Locks now work with the August app! The Connected by August Module will allow you to lock/unlock, share access and see who comes and goes all from your August app.Plus you can control your lock with voice assistants including Amazon Alexa, the Google Assistant and Siri!

Why is my Yale lock not working?

If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.

How do I setup a wireless bridge?

Place the wireless bridge within range of your wireless router’s signal, and also within a cable’s length of your wired devices. If your router supports Wi-Fi Protected Setup, or WPS, setup is easy. Simply press the WPS buttons on your bridge and router to link them wirelessly.

Does Yale lock need a bridge?

If you have been accessing your Yale Access Smart Lock via Bluetooth only and would like to access it from a remote location, you will need to set up an Yale Connect Wi-Fi bridge.A Yale Connect Bridge is also needed for certain integrations such as Amazon Alexa and Google Home.

What does a Yale WiFi bridge do?

YALE CONNECT WI-FI BRIDGE – Enables integrations like Voice Assistant and remote functionalities of your Yale Smart Lock from your phone, such as lock/unlock your door remotely and instant alerts.

How do I add a sensor to my Yale alarm?

How do I add devices to my Standard alarm?

1. Press button A and then enter the PIN.
2. Then button A again, followed by the number 4.
3. Press the button for the device you want to add (you’ll get a beep from the siren acknowledging that the device has been learnt in).

Can you drill a deadbolt lock in metal door?

Here is how to install a deadbolt lock on a metal door in five steps:Add another mark at the same height and the center of the door’s edge. Drill a hole on the door face using the two 1/8-inch hole saw, starting from your inside mark. Continue drilling until the bit penetrates through the door.

How does August autolock work?

Whether you are at home, or out and about, Auto-Lock seals your door after the amount of time you choose. You can select anywhere between 30 seconds and 30 minutes before your door will automatically lock again. Auto-Lock happens each time the door is opened, as opposed to on a regular schedule.

Why does August lock say open locked?

If the encasing has been removed from the DoorSense™ magnet, the August App might display that your door is open when it is actually closed. The front cover (encasing) is a necessary part of the DoorSense™ device that is required for proper calibration. Removing it can throw off the calibration.

How do I install a wave device?

To Install WAVE on devices running Windows OS

1. Download the latest version of WAVE. Make sure to select the correct installation package based on your Windows OS version (64 bit or 32 bit).
2. Double-click on the WAVE installer file to launch the executable file and follow the installer wizard.