If the SLP or SL Message is ON Solid (Not Flashing) on the Display, the Spa is Operating in the Sleep Heating Mode, but there is No current water temperature because the Spa is between Filter Cycles.The Water Temperature will probably drop Below Set Temperature between Filter Cycles.
What does SL mean on hot tub?
Sleep
SL: Sleep
Sleep mode will only allow the spa to heat within 20 degrees of the set temperature.
What does SL mean on a strong spa?
SLEEP SL, SLP
Sleep is considered a vacation heater setting, and will maintain your spa water at the most affordable price. Spa will only heat during your filter period. The water temperature may drop up to 20 degrees below your desired temperature.
What does SL mean on a Dream Maker Spa?
Sleep Mode
The Sleep Mode (SL) works in the same way that the (EC) mode works but automatically sets the temperature to 20 degrees less.
What does SL mean on CleverSpa?
A SL Error Code showing on your CleverSpa® Control Panel can mean there is a blockage in the system which is preventing hot water from circulating.
What does 5l mean on hot tub?
Temperature sensor error
The Big List of Spa and Hot Tub Error Codes
| CODE | ERROR CODE DESCRIPTION |
|---|---|
| 5 | Temperature sensor error, or water is dangerously hot |
| 6 | High limit manual reset on heater is tripped |
| 7 | Stuck heater relay |
| 9 | Water pressure fault; pump may be air locked, or water level low |
What does SL mean on Viking Spa?
Sleep Mode
Sleep Mode heats the spa to within 20°F/10°C of the set temperature only during filter cycles. SL will display solid when temperature is not current, and will alternate with temperature when temperature is current.
What mode should my hot tub be in?
Economy is a good setting for those who use the hot tub daily. The drop in temperature fluctuates during the year from minor or no temperature falls in the summer, to larger drops in the coldest part of winter.
What does F2 on a hot tub mean?
The F2 error code is usually from a balboa power pack system and normally is referring to a flow issue in your hot tub.A dirty filter can often be the culprit here so make sure to either replace or give your hot tub filter a good cleaning. Look at your intakes and out takes and make sure they are clear of debris.
What is EC mode on hot tub?
Ecn or Ec Message
Ecn or Ec is Alternating with Temp: The Spa is Operating in the “Economy” (Ecn or Ec) Heating Mode. The Water Temperature is sampled Only during Programmed Filter Cycles. The Heater will only operate and Heat up to Set Temperature during the Filter Cycles.
How do I turn up the heat on my Beachcomber hot tub?
To change heating modes, press the button then the button. To activate this jet pump, press the button once to activate low speed, twice to activate high speed and three times to turn the pump off. The low speed will turn off automatically after 4 hours and the high speed will turn off after 15 minutes.
How do you adjust a hot tub?
The procedure for switching from one mode to another is different depending on the type of keypad installed on your hot tub. Keypads without a “Mode” button. Press “Temp”, then “Light” to switch to the next mode. Repeat the process until you reach the mode that you’re looking for.
Should I leave my inflatable hot tub on all the time?
But in our experience, if you use your inflatable hot tub regularly let’s say three times a week or more it’s much better to leave the heater on all the time.We suggest that when you finish in your hot tub for the day, you set the heater’s digital control to around 96F.
Why is my inflatable hot tub not heating up?
If your spa heater won’t heat, remove and clean the filter(s) to rule out a pressure or flow rate problem in your hot tub heater. Low water level, a clogged pump impeller, closed valves, clogged pipes, or blocked spa drain covers can also cause flow issues.
Why is my hot tub making a loud noise?
The most common problem that could occur when a hot tub hums is an air lock in the hot tub.Air pockets prevent hot tub pump from pushing the water properly and eventually, it could lead to the pump to break. These air pockets or air lock need to be purged before your pump can work again.
What does 1c mean on my hot tub?
When filling* your hot tub in cold conditions a warning message ‘IC’ or ‘ICE‘ may appear. This is to inform you that the water temperature is below 7.2°C (45°F) and open to the risk of freezing.
What is F4 on hot tub?
F2, F4, F6 – Displayed by some hot tubs to show how long they are set to filter. F2 = 4 hours, F4 = 8 hours and F6 = 12 hours. Hold – Displayed when panels buttons have been hit too many times, or too quickly.
Is Thermospa any good?
ThermoSpas scores highly across online consumer reviews. ThermoSpas is a ConsumerAffairs accredited company, where customer reviews result in a 4.1 out of 5-star rating. Consumer opinion on My3Cents averages out to 4.4 out of 5.
How much are ThermoSpas hot tubs?
ThermoSpas FAQ
Depending on which features you want, a ThermoSpas hot tub costs anywhere between $4,000 and $22,000. A two-person ThermoSpas tub with limited features falls on the lower end of the price range, but larger, luxury hot tub models with deluxe features cost $10,000 or more.
How do I reset my hot tub control panel?
How to Reset a Spa Heater
- Locate the spa’s high-limit reset. This is a red button found on many spa packs.
- Press the high-limit reset button.
- Turn on your spa and observe its operation.
- Flip the breaker panel switch on or press the reset button on the GFCI outlet to restore power.
How do you change the mode on a Viking hot tub?
The mode is changed by pressing the Temp button, then pressing the Light button. Standard Mode is programmed to maintain the desired temperature. Note that the last measured spa temperature displayed is current only when the pump has been running for at least 2 minutes.
Contents