Does Pico remote work with Maestro?
Both Caseta and Maestro come in handy when you want to control the lights in the house. For instance, you can use the Pico remote control with either a Maestro or Caseta.
How do I pair my Lutron Pico remote?
Press and hold the “Off” button on the dimmer/switch you wish to pair the Pico remote to for 6 seconds until the green indicator lights on the unit begin to flash, then release. This will place the device in pairing mode.
Will Lutron Maestro work with Caseta?
1. Does Lutron Maestro work with Caseta? No, Maestro Wireless does not actually work with the Lutron Small Bridge. Only Pico Remote can control Maestro Wireless dimmers and switches.
How do I reset my Lutron Caseta Pico remote?
Step 1: Quickly triple tap and hold either the top or bottom button on the Pico control. DO NOT release after third tap. Step 2: Keep the button pressed after the third tap for a few seconds until the status LED turns solid green. The Pico control has now been returned to Factory Default Settings.
What is the difference between Lutron Maestro and Diva?
The differences are really in user interface and aesthetics. The Diva will have a toggle button for on and off, and the Maestro has a push button. The Diva has a slider for dimming, and the Maestro uses a push button rocker for dimming.
Is Lutron Maestro Wireless?
Maestro Wireless uses Lutron’s reliable Clear ConnectTM RF Technology which allows PicoTM wireless controls and Radio Powr SavrTM occupancy/vacancy sensors to communicate with dimmers, switches, and lamp dimmers, allowing for easy retrofit.
How many devices can a Pico remote control?
Thank you for your post! Pico Controls (or other One-Way devices) can transmit to any number of devices with-in the 30ft RF Range. As long as your 18 PowPaks are within 30ft, the Pico should be able to pair to all 18. Hope this helps!
How do I set my favorite Pico remote?
The favorite button is programmed locally from the Pico remote and not from the Lutron App. Adjust your dimmers levels to the scene you wish to create, then press and hold the favorite button on the Pico for 6 seconds. The dimmers’ LED indicators will flash to confirm the favorite scene has been saved.
Can one Pico remote control multiple dimmers?
One Pico remote can be used to control multiple dimmers. The On and Off buttons and the Raise and Lower buttons then control all dimmers connected to the Pico. For example, if you hit the Raise button, all lights get brighter.
Can’t connect to Lutron bridge?
All Users: If you are still unable to connect, we recommend that you reset your router by disconnecting the power for 10 seconds. This will restart the bridge. If the Lutron App is still unable to find the bridge, this is most likely because the Bridge and your smart device are not connected to the same network.
How do I reset my Lutron power pack?
A Triple-tap the Toggle button u on the PowPak Dimming Module with 0 10 V and hold until the LED begins to flash slowly; release button. B Within 3 seconds of the start of flashing, triple-tap the same button again and the LEDs will flash rapidly indicating that the unit has been reset to factory defaults.
How do I reset my pico remote dimmer?
You may have to factory reset them first. To do so, just press the “on” button 3 times, holding on the third press until the unit begins to blink. Then release and press on the “on” button 3 more times. No need to hold this time.
How do I reset my Lutron Smart Bridge?
The BLACK button on the back – you can perform the standard 3-press-hold-3-press reset. I have had success with this method after speaking with Lutron regarding a few issues we were having. Procedure: Press the black button on the back of the Smart Bridge Pro 3 times, holding it for 10 seconds on the 3rd press.
How do I reset my Lutron shades?
Step 1: Use the control’s Raise and Lower buttons to adjust the shade to desired level. Step 2: Hold the Favorite button on the Pico® for about 10 seconds until the shade button blinks. Restoring Shades to Factory Default Note: This step will remove any controls assigned to the shade.
How do I reset my Maestro dimmer?
How to Reset a Lutron Maestro
- Inspect the dimmer switch panel. The large rectangular button in the center is the dimmer switch button.
- Push and hold the dimmer switch. While holding it, push the air gap switch back upward to turn it back on.
- Continue to hold the dimmer switch for 15 seconds.
What is difference between Lutron Claro and Diva?
Answer: From what I’ve seen the Diva line references dimmers while Claro refers to wall plates and matching switches. Answer:If a dimmer is required, Lutron recommends the DV-10P for 1000W of incandescent/halogen lighting.