How Do I Register My Yale Z-Wave Lock?

Steps to Register Your Smart Module:

1. Remove the batteries from your lock.
2. Remove and reinsert the Smart Module into the slot in the battery compartment.
3. Reinsert the batteries.
4. Wake up the keypad by pressing the Yale logo or any key.
5. Enter your Master Entry Code and then the gear icon.
6. Press 7 followed by the gear icon.

How do I register my Yale lock on the app?

How to Set up a Device in the Yale Access App

1. Download the Yale Access App. Download the free Yale Access App on your smartphone and create an account.
2. Enable Bluetooth.
3. Set up the Device in the Yale Access App.
4. Scan the QR Code.
5. Install Your Assure Lock.
6. Power Your Assure Lock.
7. Create Master Entry Code.
8. Remove the Batteries.

Where is QR code on Yale Smart lock?

When setting up your product, the app will ask you to first scan your Yale Access QR Code. This code is located on either documentation insider your packaging, on your smart module, or on the battery cover of your product. If you cannot locate your QR code, you can manually enter the serial number into the app.

How do I connect to Yale Zwave?

You can include your Yale Z-Wave Lock by first clearing it from the network. Next, put your system into its Z-Wave inclusion mode. Bring your lock close to the Z-Wave hub, and activate its inclusion function. The lock should pair with the network.

How do I connect my Yale lock to my phone?

Open the Yale Secure app and create a new home by tapping the + icon in the top right corner. Tap the + icon next to your home name to add a new lock. Tap the Yale lock when it appears as an available device.

Where is enrollment button on Yale lock?

When prompted to register your lock in the setup flow: Locate the enrollment button, underneath the battery cover and next to the thumbturn (see image). Press and release the enrollment button after two seconds.

How do I connect my Yale lock to the Internet?

In the Yale Access app, go to the side menu (upper left), tap Set Up New Device. Choose Set Up A Connect. Choose a lock with which to associate your Yale Connect Wi-Fi Bridge. When prompted, plug connect into an outlet near your door and then follow the in-app instructions.

Where is the serial number on a lock?

The serial number for your lock is listed there. Alternatively in most cases, the serial number is available on the back of the lock. If you need to know the Generation of the Smart Lock you have, it is identified by the first parts of the serial number: L1 – 1st Generation.

How do I connect Nest Yale lock to nest app?

How to Connect the Nest x Yale Lock to the Nest App

1. Sign into your Nest account or create one. If you’re new to Nest: Go to the Apple App Store or Google Play to download the Nest app and create a free account.
2. Scan the QR code.
3. Add the lock to your Nest account.
4. Create Nest passcodes.

How do I connect my Yale lock to smart things?

Connect Your Yale Lock To SmartThings

1. If needed, press any key on the lock to wake it.
2. Enter the 4- to 8-digit Master PIN code followed by the # or “gear” key.
3. Press 7 followed by # or “gear”
4. Press 1 followed by # or “gear”
5. Wait up to 60 seconds.
6. When the device is discovered, it will be listed at the top of the screen.

How do I reset my Yale Z-Wave lock?

If you want to factory default your Yale Z-Wave Lock, complete the following steps:

1. Prepare the lock. Remove the battery cover from the lock.
2. Press the reset button. Press the reset button, and keep it held down.
3. Reapply power. With the reset button held down, reinsert the battery to reapply power.
4. Reassemble the lock.

How do I add a Yale lock to Google home?

Integrating with Google Home

1. Open the Google Home app and log in to your Google Account.
2. Select the Add (+) option at the top.
3. Select Set up a device.
4. Under Works With, choose “Have something already set up?”
5. Scroll to or search for Yale Access Home in the Manage Accounts menu.

How do I reprogram my Yale keypad lock?

How do I set or change the primary code on my Keyless Connected Smart Door Lock?

1. Wake up the keypad by touching it using the palm of your hand.
2. Enter your current master code and then press the hash button.
3. Then press the number 1, followed by the hash key.
4. Enter a new master code, which must contain 6 numbers.

How do I reset my Yale lock to factory settings?

Remove the mounting plate to reveal the reset button, which is located on the left side of the cable connector. Hold down the reset button while you put in the batteries. Keep holding down on the reset button until the light turns red and the lock says “Just a moment, erasing all settings.” Release the reset button.

How do I reset my Yale push button lock?

To reset the lock to factory default, see the following:
2. The reset button (see image at right) is located above the PCB cable connector. 3. Hold down the reset button for a minimum of 3 seconds and then reinstall the batteries; once the batteries are properly installed, release the reset button.

Why is my Yale lock not working?

If you find that the issue is the lock, try rebooting the lock first. To reboot the lock, remove one battery from the lock and replace it. Once you have rebooted the lock, try the entry code again. If this does not work, the keypad must be reset.

Does Yale lock automatically?

Your Nest ? Yale Lock can automatically lock itself. You can choose how long your lock should wait before automatically locking, and you can have Auto-Lock on all the time or only when no one’s home. On the app home screen, tap Settings .Tap Auto-Lock to turn it on or off.

Why is my Yale lock not connecting to Wi-Fi?

Reset your Smart Lock by removing and reinstalling batteries after checking battery life. Unplug the Yale Connect Wi-Fi BridgeConnect for a few seconds, and plug it back in. Configuration errors. Reset the Yale Connect Wi-Fi Bridge by holding down the button for 5 seconds and set up again using the Yale Home app.

How do I reset my Yale Wi-Fi lock?

Open the Yale Access App and go to House Settings. Select the Yale Connect Bridge Settings menu. Scroll to Factory Reset. Select Reset Connect.

Does Yale lock work without Wi-Fi?

The Nest ? Yale Lock in your home works a little differently than other Nest products do. Your lock doesn’t use Wi-Fi. Instead, it uses a low-power connection to talk to Connect or Guard. Your Connect or Guard then uses Wi-Fi to send information from your lock to the Nest app.

How do I connect Zwave lock to Alexa?

How to use Alexa with your Yale Assure Lock / Lever with Z-Wave or Zigbee

1. Tap the menu (three horizontal lines in the top left)
2. Tap Smart Home.
3. Tap Devices.
4. Tap on your lock.
5. Tap Edit.
6. Tap to enable: Unlock by app will enable the ability to unlock your lock manually from the Alexa app.
7. Tap the back arrow to confirm.