Metric Motor, 40 HP, 3-Phase, Nameplate RPM 1,780, Voltage 460V AC, 200L Frame, CW/CCW. Country of Origin Varies. Country of Origin is subject to change. IEC 200 frame three-phase IEC metric general purpose AC motors have a 55mm diameter, 110mm length shaft whose center is 200mm above the base mounting surface.
What does a 40 hp electric motor weight?
808.5 lbs
LEESON 40 HP Electric AC Motor 3 Phase 1780 RPM TEFC Rigid Mount 320 Frame Wattsaver Equipped with LEESON’s Spike-Resistant Insulation System.
Additional information.
| Brand | Leeson |
|---|---|
| Weight | 808.5 lbs |
| Item Type | Electric Motor |
| HP | 40 |
| RPM | 1780 |
What does the size of a motor mean?
Engine size may also be referred to as ‘engine capacity’ or ‘engine displacement‘ and is the measurement of the total volume of the cylinders in the engine. The bigger the engine size, the more space there is for air and fuel inside it.The amount of power produced by an engine is usually quoted in horsepower.
How fast is a 1 hp motor?
The 1800 RPM, 1HP motor produces 3 ft. lbs of torque at 1800 RPM. The 3600 RPM, 1HP motor produces 1.5 ft. lbs.
How much does a 40 HP Baldor motor weight?
918 lbs.
Product Documentation
| Catalog Number: | ECP4308T |
|---|---|
| Description: | 40HP,1190RPM,364T,TEFC,230/460v,3PH,60HZ,CHEM DUTY,PREMIUM |
| Ship Weight: | 918 lbs. |
How big is a 50 hp electric motor?
General Purpose Motor, 50 HP, 3-Phase, Nameplate RPM 1,775, Voltage 230/460V AC, 326T Frame. Country of Origin Mexico. Country of Origin is subject to change. NEMA 320 frame three-phase general purpose AC motors have a standard 2-1/8″ diameter, 5-1/4″ length shaft whose center is 8″ above the mounting surface.
How many amps does a 75 hp motor draw?
AC Motor Full Load Amperes
| HP | 200 Volts | 440-480 Volts |
|---|---|---|
| 60 | 177 | 77 |
| 75 | 221 | 96 |
| 100 | 285 | 124 |
| 125 | 359 | 156 |
What is a 42 stepper motor?
Nema 42 Stepper Motors
NEMA 42 stepper motor is the largest step motor of the stepper motor family. This is known to be the finest type of stepping motor.The nema42 stepper motor is mainly used in the applications where precise and efficient motion control is required whether the motion is linear or rotational.
How do you size a motor?
Divide the motor speed by the required speed and round down to get a starting gear ratio. Then divide the required torque by the gear ratio to find the newly required torque. This will help you narrow the choices down to a few select motors.
How many liters is a V8?
The displacement of modern V8 engines is typically between 3.5 to 6.4 L (214 to 391 cu in), though larger and smaller examples have been produced, such as the 8.2 L (500 cu in) V8 engine used in the 19711978 Cadillac Eldorado.
How many HP is rpm?
Mathematically, horsepower equals torque multiplied by rpm. H = T x rpm/5252, where H is horsepower, T is pound-feet, rpm is how fast the engine is spinning, and 5252 is a constant that makes the units jibe.
What is the rpm of 2HP motor?
Sonam 2HP Single Phase Electric Motor, Speed: 2800 RPM.
Is 1 HP equal to a horse?
Does one horsepower equal one horse? Not quite. It’s a common misconception that one horsepower is equal to the peak power production of a horse, which is capable of a maximum of around 14.9 horsepower. By comparison, a human being is capable of approximately five horsepower at peak power production.
How many amps does a 40 hp motor draw?
AMP DRAW BASED ON HORSEPOWER
| HP | 1 Phase Amps | 3 Phase Amps |
|---|---|---|
| 115 volt | 460 volt | |
| 25 | | 34 |
| 30 | | 40 |
| 40 | | 52 |
How heavy is a 50 hp motor?
50 hp 237 lbs.
How much does a 50 hp electric motor way?
LEESON 50 HP Electric AC Motor 3 Phase 1780 RPM TEFC Rigid Mount 320 Frame Wattsaver Equipped with LEESON’s Spike-Resistant Insulation System.
Additional information.
| Brand | Leeson |
|---|---|
| Weight | 597 lbs |
| Item Type | Electric Motor |
| HP | 50 |
| RPM | 1780 |
What size breaker do I need for a 40 hp motor?
Full-Load Current and Circuit Protection Data for Three-Phase AC Motors
| Motor Horsepower | Breaker Size | |
|---|---|---|
| 20 | 230 V 460 V | 100 50 |
| 25 | 230 V 460 V | 100 50 |
| 30 | 230 V 460 V | 125 70 |
| 40 | 230 V 460 V | 175 100 |
What size wire do I need for a 30 hp motor?
| Motor HP | NEMA amps | Phase Wires (AWG) |
|---|---|---|
| 25 | 34 | 6 |
| 30 | 40 | 6 |
| 40 | 52 | 4 |
| 50 | 65 | 4 |
How many amps does a 37 kW motor draw?
Three Phase Motors
| MOTOR RATING | HP | APPROX. F.L.C. AT LINE VOLTAGE |
|---|---|---|
| 22 kW | 30 | 74 |
| 30 kW | 40 | 99 |
| 37 kW | 50 | 130 |
| 45 kW | 60 | 147 |
What is the largest stepper motor?
NEMA 42 stepper motor is the largest NEMA size in the market. GEMS use advanced magnetic material to provide the highest torque density with the least vibration and noise level.
What is meant by NEMA 34 size motor?
NEMA (National Electrical Manufacturers Association) 34 is a stepper motor with a 3.4?3.4 inch faceplate and 1.8° step angle. Each phase draws 4.0 A, allowing for a holding torque of 42 kg-cm. NEMA 34 Stepper motor is generally used in Printers, CNC machine, Linear actuators and hard drives.