How Do I Use Kevo Smart Lock?

How do you unlock a Kevo door?

To unlock, just tap your finger on the casing and the blue LEDs light up again. You hear the bolt turning, and the light goes green. There are other red LED combinations to inform you of when to replace the batteries in the inside “box” of the Kevo.

How do I connect to Kevo?

Ensure that Bluetooth is on, as indicated by a small icon on the upper right corner of the smart device screen. 3. Press and hold the Program button again until Kevo beeps (if sound is turned on). The Bluetooth symbol in the top right corner of the screen should blink while Kevo and smart device are communicating.

How do I lock my Kevo lock?

Remove your interior cover and locate the small switches on the back of Kevo. Put Switch #4 (farthest on the right) in the UP position. That will enable auto-locking. When enabled Kevo will automatically throw the bolt after 30 seconds.

Does Kevo lock automatically?

Kevo Convert automatically locks your door 30 seconds after unlocking for safety and peace of mind.

Can I lock my door remotely with Kevo?

With Kevo Plus you can remotely lock and unlock your Kevo smart lock from anywhere as long as you have a internet connection for your smart device or computer. Through Kevo’s mobile app or the mykevo.com web portal you can see the door lock status remotely and if needed lock or unlock your door.

How do I send a Kevo guest key?

From the Main Menu in the App:

1. Choose the lock you would like to share access to.
2. Select icon to send and eKey.
3. Select the eKey recipient by selecting from your Kevo Users, device Contacts, or Add by Email *Note device contacts must have an email address associated with it.

Can I use Kevo remotely?

With remote access enabled, you can control your Kevo Smart Lock from anywhere your iOS or Android device has an Internet connection. This includes other Wi-Fi networks or your mobile connection.

How do I connect my Kwikset lock to my phone?

On the Overview screen, tap the More icon, then tap Add a Device. On the Add a Device screen, tap the Kwikset model number you purchased. Tap Continue. You will be presented with tasks to complete before you can move forward with device pairing.

How do I connect my Kwikset lock?

You’ll first need to open up your smarthome hub’s app and navigate to where you add a device to the hub to put it in search/discovery mode. Once that’s done, press the “A” button on the back of the smart lock. Wait a few seconds and the lock will connect to your hub.

How do I set my Kwikset lock?

How do I program my SmartCode 913 lock?

1. Open the door.
2. Remove battery cover.
3. Press the program button once.
4. Enter new user code.
5. Press lock button.
6. If programming is successful the keypad will flash green once, and you will hear one beep. Connect with us. Monday-Friday: 7:00am-4:00pm PST. Saturday: 6:30am-2:30pm PST.

Does Kevo connect to WIFI?

Since the Kwikset Kevo doesn’t have a Wi-Fi chip built in, it’s not able to connect to the internet by itself. Instead, it relies heavily on Bluetooth for many of its functions. This means that you can’t control the lock remotely if you’re away from home.

How do I update my Kevo lock?

For my Kevo Smart Lock, How Can I Upgrade To The New Version On My Android Phone?

1. Touch “Apps”
2. Touch “Settings”
3. Touch “System Updates”
4. Touch “Check for new System update”
5. Touch “Ok”
6. Follow next steps for new version installation – if you are ready to proceed. Connect with us. Monday-Friday: 7:00am-4:00pm PST.

How do I reset my Kevo lock?

If you wish to reset your Kevo, press and hold down the reset button for 10 seconds until the lock beeps and the lock face LEDs flash red. Note: You will need to re-enroll your Owner phone and fobs, and you will need to resend eKeys to your Kevo users.

Why does my Kevo keeps unlocking?

If this touch event occurs while an authorized phone or fob is active and within Bluetooth range, it may cause the lock to cycle between lock and unlock.Again this continuous cycling condition can ONLY occur if an authorized phone or fob is within Bluetooth range and active.

How do I transfer Kevo to new owner?

It will be near the top-left corner of the lock. Press and hold this button for about ten seconds until you hear the lock beep and the lights on the outside portion of the lock flash red. Once this happens, release the button and you’ll be good to go! The Kevo is now ready for its new owner.

How long does Kevo battery last?

one year
How Long Does The Kevo Fob Battery Last? The Kevo fob battery should last one year with normal use.

Does Kevo lock work with Alexa?

Enabling the Kevo skill and linking your Kevo smart lock account to your device with Alexa gives voice control to your door locks. Once you link your accounts, you can issue voice commands to Alexa like: Alexa, ask Kevo to list my locks.

What is Kwikset auto lock?

Auto-lock is an optional re-locking feature whereby the Halo deadbolt re-locks itself after a selectable time delay after it’s been unlocked.

Can I unlock my door remotely?

Yes. This feature allows you to lock and unlock Kevo from your app while you are in bluetooth range.

What is the difference between Kevo 1st and 2nd generation?

Kevo Smart Lock, 2nd Gen features an all new, smaller and sleeker interior. The interior size has been dramatically reduced.Overall Kevo Smart Lock, 2nd Gen is a much more refined and proven product compared to Kevo Smart Lock, 1st Gen.