How Do I Reset My Vivint Thermostat?

Factory Reset

1. From the Home screen, press and hold the SIDE button for three (3) seconds.
2. Press DOWN to highlight Installer, then press the SIDE button.
3. Press DOWN to highlight Reset, then press the SIDE button.
4. Press DOWN to highlight Reset, then press the SIDE button.

How do I control my vivint thermostat?

Navigate to the thermostat’s main screen by tapping the Temperature icon. Select the Settings gear icon in the upper right-hand corner. Select the desired thermostat and customize as desired. Note: From here, adjust the Mode, Fan, States, and Notifications.

How do I turn on my vivint thermostat?

Vivint Smart Thermostat – Adjust Mode

1. Press the button on the right side of the thermostat once to bring up the mode options.
2. Use the up and down arrows to select heat, cool, heat and cool (auto), or off.

Does my vivint thermostat need batteries?

The Vivint Smart Thermostat was previously known as the Element Thermostat. You will need: 4 non-rechargeable alkaline AA batteries.

How do I reset the temperature on my thermostat?

Here are the step-by-step reset instructions:

1. Turn your thermostat off by switching it to the off position.
2. Find the breaker that powers your HVAC system and turn it off.
3. Wait 30 seconds and turn the breaker back on.
4. Turn your thermostat back on.

How do I set the temperature on my Vivint thermostat?

Learn how to adjust the temperature on a smart thermostat from the Vivint Smart Home app.

1. Tap the Temperature icon from the bottom menu.
2. Adjust the temperature by tapping the plus or minus icons or by sliding the heat or cool temperatures around the circle.

How do I keep the temperature on my Vivint thermostat?

Smart Home App – Adjust Thermostat Schedule Settings

1. Tap the thermostat icon on the bottom navigation bar of your Vivint Smart Home app.
2. Tap the settings icon in the top right corner.
3. Select Schedule preferences to adjust the temperature settings for weekdays and weekends.
4. Adjust the schedule as desired.

How do I set my Vivint thermostat to emergency heat?

Vivint Smart Thermostat – Activate Emergency Heat

1. Press the button on the right once to bring up the mode options.
2. Use the up and down arrows to select ‘E-Heat. ‘ This option will only be available if your system has a heat pump or auxiliary heat option.

What is the installer code for Vivint?

2203 is the default installer code on the Vivint security system.

Why is my Vivint thermostat not working?

If you think that your Vivint Smart Thermostat is not heating or cooling, you can run a test from the Vivint Smart Thermostat. If the test fails, there may be an issue with your HVAC system. You will need to contact your HVAC technician to diagnose the problem.

Why is my Vivint panel offline?

Several issues can cause your panel to lose the connection to your home WiFi network. A passing storm may have knocked your power and network offline. An Internet outage in the area could have caused the WiFi to go out.Find out how to test your WiFi to determine if you should contact Vivint or your ISP.

What kind of battery does Vivint panel use?

CR2032 batteries
The door and window sensor uses two CR2032 batteries.

How do I reset my thermostat after changing the battery?

Factory Reset the Thermostat

1. Ensure that your thermostat is turned off.
2. Open the door of the battery compartment.
3. Now take out the batteries.
4. Put the batteries back on in reverse to the indicated polarity by the markings in the battery holder.
5. Allow the batteries to stay this way for about five seconds.

Where is the AC reset button?

An AC’s reset button is typically red and visible, so it should be easy to spot. If you don’t see a reset button on the outside, it could be located inside the unit behind the service panel. Before poking around inside the machinery, be sure to cut power to the system by flipping off your circuit breaker.

How do I change my Vivint thermostat to Celsius?

Change temperature display unit to either Celsius or Fahrenheit from the Smart Hub:

1. From the home screen of the Smart Hub, tap the Menu icon in the bottom right corner.
2. Tap General and enter your 4-digit PIN.
3. Scroll down and use the toggle to switch between F and C.

Why does my Vivint thermostat keep changing?

There are three reasons. Frozen anticipator, Dirt stuck in the anticipator, and wrong location.

Can I lock my Vivint thermostat?

Sure, you can control your thermostat with your phone. But when it’s part of a Vivint, you can integrate it with other smart home devices.With one-touch leaving, pressing the lock button on your smart lock will automatically adjust your temperature to conserve energy while you’re away.

How do I turn my vivint fan off?

Change thermostat mode from the Vivint Smart Hub:

1. From the home screen of the Vivint Smart Hub, tap the Temperature display icon from the bottom menu bar.
2. The mode and fan settings will be displayed in the bottom left corner.
3. The mode can be set to off, heat, cool, or auto.

What is hold on vivint thermostat?

Nope! This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.

How does vivint thermostat work?

The Vivint Element Smart Thermostat has a built-in proximity sensor that’s tied to the app on your phone. When you (or your phone) leave home, or you set your system to away, it will adjust.

What does AUX heat mean on my vivint thermostat?

What does it mean? The “AUX Heat” mode is usually an indicator that it’s freezing outside, and your is heat pump is using a secondary backup heat source – your auxiliary heat—to keep your home at your set temperature.