ecobee thermostats are not compatible with high voltage systems.
How many volts does ecobee thermostat use?
ecobee3 is designed for 24VAC with a 2A maximum current. Do not connect it to line (high) voltage or millivolt systems. Before doing anything else, power off your system. If your HVAC equipment doesn’t have a master switch, go to your circuit breaker box and turn off the breaker.
Does the ecobee need AC wire?
Even though Ecobee does not require a c-wire, you still need to have a 4-wire thermostat cable because they require a power extender kit. You will connect the wires from your furnace to the power extender kit and then to the thermostat.
Does ecobee work without electricity?
The only batter that’s in the ecobee 3 thermostat is to back-up the data and you will not be able to access is unless you take the thermostat apart. In the case of a power outage, once power is restored the battery has retained all in the information such as scheduling, etc.
Does ecobee need a jumper?
The Ecobee3 connects the Rc and Rh terminals automatically which means you can choose either Rc or Rh to plug the wire into. It also means no jumper bridge is needed.
Can ecobee control my HRV?
The Ecobee can control an HRV or humidifier but not both. The Ecobee will only control 1 of the HRV fan speeds and has a good humidifier frost protection option so I would use the Ecobee to control the humidifier. The Vanee Lite Touch Control #40270 is cheap to buy and would need 3 wires. B, G and Y.
Is ecobee compatible with Trane?
You can use an Ecobee thermostat on a gas furnace, electric air handler, air conditioner, heat pump, radiant heat, oil furnace, boiler, solar and geothermal HVAC systems. Ecobee will work with all major manufacturers including Trane, Lennox, Carrier, Goodman, Amana, Rheem, American Standard, and others.
How do I add a C to ecobee?
To enable this system mode, go to Main Menu > Settings > Installation Settings > Thresholds > Auto Heat/Cool and select Enable.
Does ecobee work with stranded wires?
If you have a high-voltage setup, a smart thermostat isn’t going to work. For Ecobee thermostats, 120V and 240V systems (such as baseboard heating) will not work at all.Google Nest also points out that its thermostats won’t work with systems that use stranded wires or stranded wires that are connected by a wire nut.
Do Ecobees have batteries?
1 Battery Replacement
Your ecobee room sensor is powered by a single 3 Volt CR-2032 battery.
Does an Ecobee thermostat have batteries?
The Ecobee comes with one wireless sensor, which is powered by a CR2032 coin-cell battery; the company says it should last about 4 years. When the battery runs low, you’ll receive an alert.
Does ecobee 3 Lite take batteries?
There’s one caveat: The Ecobee3 Lite doesn’t offer a rechargeable battery like Nest, so you’ll need to have a C wire to power the digital display or install the included Power Extender Kit. Shut off power to your thermostat at the circuit breaker.
What is the O B Wire?
O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating. Sometimes it might be a single O/B wire instead of two separate wires.
What’s the difference between W1 and W2?
In a conventional system, W/W1 controls your heating system and, where applicable, W2 controls your heating system’s second stage, which helps warm the home faster.In conventional cooling systems, Y/Y1 controls the first stage of cooling and Y2 controls the second stage, which helps cool down the home faster.
How is your O B reversing valve energized?
Heat pumps will have a reversing valve, which switches the heat pump from heating mode to cooling mode. The valve will operate in one of two ways: 1) O reversing valve (energized in cooling) or 2) a B reversing valve (energized in heating).
What is ecobee compatible with?
ecobee thermostats are compatible with most residential heating and cooling systems in North America, including gas, oil, electric, and dual fuel systems.
Does ecobee work with carrier?
Ecobee is another company that’s compatible with the Carrier Infinity heating and cooling systems, but unlike the Infinity thermostat it isn’t a proprietary system, this thermostat will work with other systems as well.This thermostat also works more like a smart hub than some other options.
Is ecobee thermostat compatible with carrier?
The ecobee smart thermostats Powered by Carrier can be connected to the Carrier Connected Portal enabling contractors to remotely diagnose and troubleshoot system issues and errors.The ecobee SmartThermostat with voice control also includes an ecobee SmartSensor in the box.
Can I replace Honeywell thermostat with ecobee?
There are quite a few differences between the Ecobee and the Honeywell thermostats.You must have a C-wire to install the Honeywell RTH9585WF; The Ecobee4 can be installed without a C-wire (using the included PEK). You can customize the display color of the Honeywell thermostat, but cannot change the Ecobee display.
How do I know if my HVAC is compatible with ecobee?
To determine compatibility, you will need to access both the wiring at your thermostat as well as the wiring at your heating system where the thermostat wiring ends. If you are not comfortable doing so, you can reach out to ecobee support for guidance, or hire a technician to aid in installation.
Which ecobee is best?
Best ecobee Thermostats in 2021
- The flagship: ecobee SmartThermostat.
- Less expensive, fewer perks: ecobee3 lite.
- Essential and convenient: ecobee Switch+
- Must-have accessory: ecobee SmartSensor (2-pack)
Contents