The Pico remote can be paired to more then one dimmer/switch in the app.Keep in mind that if the Pico remote is paired to multiple devices it will control them all at once with no way to separate control individually.
How many devices can a Pico remote control?
Thank you for your post! Pico Controls (or other One-Way devices) can transmit to any number of devices with-in the 30ft RF Range. As long as your 18 PowPaks are within 30ft, the Pico should be able to pair to all 18. Hope this helps!
Can you link 2 Lutron Caseta switches?
All you have to do is pair the Pico to your existing, previously installed Caseta dimmers. Really thought I’d be able to avoid some difficult wiring with dimmers like this. There is nothing to rewire. You mentioned that you already have the lights controlled by two separate Caseta dimmers.
What is the round middle button for on a Pico remote? This is a favorite buttonused to recall a preset level for any light the Pico is controlling.
How long do Lutron Pico remotes last?
10 years
How long does the Pico remote battery last? The CR2032 coin cell lithium battery in the Pico remote will last for 10 years.
Can Lutron Pico control multiple lights?
With a bridge you can pair multiple Picos to a switch/dimmer. On a non-bridge system, you can have up to 10 Pico remotes control 1 dimmer. The only way to control 2 different dimmers independently from one Pico would be to use the 2-group 4-button Pico.
How long do Pico remote batteries last?
10-year
The Pico is battery- powered, with an industry-leading 10-year battery life.
How many switches does a Caseta hub have?
75 devices
How many switches/dimmers can be grouped with a single sensor? Devices that are within range of the sensor. Caseta has a limit of 75 devices.
Does Lutron Caseta use Z Wave?
Lutron Caseta isn’t compatible with Z-Wave or ZigBee smart hubs because it operates on a different radio frequency. Instead, it uses its own mesh network protocol to connect to a dedicated hub.
What is Pico switch?
The Pico remote control is a convenient way to control Lutron Caseta Wireless dimmers. With the Pico you can turn lights on, off, brighten, or darken them from anywhere in the room. Use the “favorite’ button to save your favorite light level.
Are pico remotes waterproof?
And it appears both rugged and waterproof (rated IP65.)
Do I need a bridge for Caseta?
A bridge is required if you wish to monitor or operate your Cas?ta products via a smart device or to integrate your system with other connected products such as smart speakers and thermostats. It is also required to create scenes or utilize timeclock scheduling of daily events. See key features listed below.
Does Caseta require a hub?
Since Caseta devices use Lutron’s proprietary Clear Connect RF wireless protocol, the hub is required in order to connect the switches to your network. This is pretty easy.
Does Caseta work without Internet?
Yes, Lutron Caseta does work without the internet. You will need an internet connection for your initial setup, but after that the Lutron Caseta only requires that its bridge maintains connection to the power supply in order for the Lutron Caseta to function.
Does Maestro work with Caseta?
The Maestro and Caseta are not compatible. All you need to do on the pico wiring is just to tie the 3 wires together. Very easy. Lutron has pretty good instructions on what to do.
How far does a pico remote work?
Devices are out of range. Check to make sure all Pico controls, keypads, dimmers, switches and shades/draperies are within 30 ft (9 m) of each other. Note: Refer to the system Setup Guide for additional troubleshooting suggestions.
Does RadioRA work with Caseta?
Technology Both the Lutron Caseta and RadioRA 2 use Lutron Clear Connect radio frequency technology in order to communicate, which provides a reliable connection throughout all components of the system. However, despite the facts that these systems have similar communication protocols, they will not work together.
What is the difference between RA2 and RA2 select?
The only difference is in the temperature control devices’ compatibility. RA2 Select can work well with Lutron Wireless thermostat and Select third-party thermostat (Nest, ecobee, and Honeywell) while Radio RA2 can work with more devices like Lutron HVAC controller, and Touch PRO Wireless thermostat.
How many devices can a Lutron bridge control?
The Smart Bridge has a 30 foot range to devices and does not have repeaters to extend the range. You can add up to 50 devices (Smart Bridge counts as one) as long as they are within 30 feet.
Can I use more than one Lutron bridge?
The app can only connect to one bridge at a time. To switch between systems with the app, you would need to log out of one system, and then log into the other system. While the Lutron app can only connect to one Bridge at a time, any HomeKit app can connect to any amount of Bridges simultaneously.
What is a Zwave switch?
Z-wave switches are one you can control your home lighting from your smart phone, Alexa, or Z-wave controller interface. The configuration options for your lighting are endless.
“
Contents