To install the Pro Power Kit V2: Connect one wire from the Pro Power Kit to the Front terminal, and the other wire to the Transformer terminal, leaving the existing doorbell wires in place. Then, re-tighten the screws. It doesn’t matter which Pro Power Kit wire goes to each terminal.
How do you wire a pro power kit?
Disconnect your doorbell’s “Transformer” wire. Use the wire clips to connect the “Transformer” wire to the white wire on the Wire Harness. Connect the blue end of the white wire to the “Transformer” terminal on your bell. Secure the Pro Power Kit inside of your bell, but don’t let it get in the way of the moving parts.
Is the Ring Pro Power Kit necessary?
If using the Ring Pro as a stand alone device on a transfomer you can use the Pro Power Kit but its not required. If you choose not to use the Power Kit best bet is to call Ring and ask them to send you the Pro Power cable. This is a inline fuse designed to protect the Ring Pro from momentary shorts.
What does the Pro Power Kit v2 do?
Now, Ring Video Doorbell Pro comes with a Pro Power Kit v2. The advantage of the Pro Power Kit is a resettable fuse, which means you can simply turn the power off and back on again in the event of a power trip or malfunction.
Can I install ring pro without existing doorbell?
Question: I don’t have an existing doorbell. Can I still install my Ring Pro? Answer: Yes! You can wire a Ring Doorbell Pro directly to a 16-24 volt AC transformer by using the free Pro Power Cable.
How much voltage does a ring doorbell Pro need?
What voltage does the Ring Pro Doorbell require? The Ring Doorbell Pro requires a constant power supply with a voltage between 16V-24V and at least 30VA of amperage. Our smart home pros have found that in the midwest only about 20% of homes built before 1995 have enough voltage to supply a Ring Doorbell Pro.
Does Ring Pro need a resistor?
The Ring Video Doorbell can only be connected to an AC transformer.In addition to the equipment included in your Ring Video Doorbell box, You will need to purchase an electronic resistor. A resistor is REQUIRED in place of a mechanical or electronic doorbell kit for this alternate configuration to work successfully.
How do you transfer a ring when you move?
To release ownership of a Ring device if you’re moving, gifting or selling your Ring device:
- Open the Ring app.
- Tap the three lines on the top left.
- Tap Devices.
- Select the device you want to release from your ownership.
- Tap Device Settings.
- Tap General Settings.
- Select Remove this Device.
What transformer is needed for ring pro?
Both Ring Video Doorbell Pro and Ring Video Doorbell Pro 2 require a doorbell transformer rated at 16-24 VAC 50 or 60 HZ, 10-40 VA.
Can Ring Pro run on battery?
Powering the Ring Video Doorbell Pro
Ring’s first two video doorbells will run on either battery power or low-voltage wiring, such as you might have with an existing conventional doorbell. The Ring Video Doorbell Pro must have a wired connection.
Does the ring video doorbell Pro come with a transformer?
Previously, when purchased in Europe, the Ring Video Doorbell Pro box included a hardwired transformer and Pro Power Kit V2. If you purchased Ring Video Doorbell Pro with Plug-In Adapter, click here to learn how to install your Video Doorbell Pro with the Plug-In Adapter.
What does the ring bypass kit do?
With this option, the internal doorbell no longer rings*, which is why a Ring Chime is sent along with it. *The reason why is that with this solution, we remove the internal doorbell from the circuit (ie: bypass it) ensuring that as much power as possible goes from the transformer directly to Ring Doorbell Pro.
Which ring doorbell is better?
If you’re shopping among Ring’s devices, we recommend the Ring Video Doorbell 3 or Ring Video Doorbell 4 for most especially those who aren’t comfortable messing around with their house’s wiring. They’re less expensive than the Pro, but you’ll get comparable video and audio quality, and most of the same features.
Should I hardwire my ring doorbell?
Ring has a number of other video doorbells in its lineup, but while the Video Doorbell Pro and Video Doorbell Elite offer slimmer designs and more high-end features, the Video Doorbell 2 (and its predecessor) are the only models that don’t need to be hardwired and can run off of battery power.
Does it matter which wire goes where on a doorbell?
Connect the two doorbell wires to the two screw terminals. Typically, it does not matter which wire goes to which terminal. Turn the power back on at the breaker.
What wire do you use for a doorbell?
Doorbells are typically wired with 18 gauge wire, also referred to as “bell” wire. Terminals on the buzzer/bell are commonly labeled “F”, “R”, and “C”. “C” stands for common and should be tied to one of screw terminals coming out of the transformer.
How do I connect my ring doorbell pro without wires?
The easiest way to install a ring video doorbell if there are no wires is to use an indoor power adapter that plugs into a power source. It is a simple adapter with a transformer built-in which ensures that your Ring Video Doorbell receives the appropriate voltage.
How long does it take to install ring doorbell pro?
Installing the Ring Video Doorbell is pretty easy and should take you no more than 15 minutes.
Can I use 22 gauge wire for a doorbell?
22-Gauge Wire (Unusable)
A 22-gauge wire is a bit on the thin side and may not provide all the power that the Ring Video Doorbell Pro needs. To determine if your wire is 22-gauge, unfold a standard paper clip.
Can I use a 24V transformer on a 16V doorbell?
While not the most ideal configuration, it is possible to use a 24V transformer on a 16V doorbell provided an appropriate resistor is installed between the two. A multimeter should be used to obtain the value of the current in the circuit.
Does ring doorbell work on 12v?
It works with a 12v battery. The battery is DC hence wiring it with dc current it should work.
Contents