How Do I Submit A Meter Reading To A Smart Meter?

Press green A button twice and then hold down to get to menus. Keep scrolling through options until the meter reading display screen shows “Total Act Import”. This shows your meter reading.

How do I send a self meter reading?

If you wish to submit your meter reading via SMS then you have to send MR and send it to 7065313030.

How do you read a meter on a smart meter?

To get a reading from these smart meters:

1. Press 9 on the keypad.
2. A series of letters will appear: IMP KWH.
3. Then you’ll see 8 digits (e.g. 0012565.3) followed by kWh at the bottom right of the screen.
4. This is your read, so in this case your reading would be 12565.

How do I send self meter reading via SMS?

Consumers can send the SMS as MREAD <12 digit customer number> to the mobile number 9930399303.

How do I manually read my electric smart meter?

To read the meter:

1. press the middle button – it should say ‘R1’
2. write down the number below ‘IMP’ from left to right – this is usually your night or ‘off-peak’ reading.
3. press the middle button again – it should say ‘R2’
4. write down the number below ‘IMP’ from left to right – this is usually your day or ‘peak’ reading.

Is there an app to read my smart meter?

You can find Samsung’s SmartThings app in the app store for your device. It’s available for: iOS in the App Store. Android in the Google Play Store.

Can you read a smart meter yourself?

If you prefer to take electricity and gas readings for yourself, here’s how you can check how much energy you’re using by reading your smart meter. You can read your smart meter by taking a look at your in-house smart meter display unit.

How do I send my meter reading to KPLC?

To submit your monthly meter reading, dial *977# and select 2. Post-paid Services, then 4. Self-Reading and then add your account number. If your reading period is closed, you will be advised when to submit your readings.

How do I submit my MSEB meter reading online?

On the MSEDCL Mobile app, the Consumers can click on the ‘submit meter reading’ button and if they have more than one consumer number, they will have to select the meter number for which they want to submit the reading. The Consumer will have to enter the meter number there.

How do I submit my self meter reading to BSES?

All you need to do is add the number 8745999808 to your contacts and start a conversation by just sending us a “Hi” . Ensure that the request for Duplicate Bill/ Self Meter reading is initiated from your registered mobile number with the BYPL.

How do I read my electric meter reading?

To read an electric dial meter correctly:

1. Read the dials from left to right.
2. If the pointer is between the two numbers, always take the lower number.
3. If the pointer is directly over a number, write down that one.

How do I read my electric meter kwh?

To figure the number of kilowatt-hours you used during the month, subtract the last month’s reading on your most recent bill from the present reading. This will give the kilowatt-hours you used for the period.

What are the A and B buttons on my smart meter?

This is your electricity reading. If your meter has an ‘A’ and ‘B’ button, press ‘A’ until you get to TOTAL ACT IMPORT. The number below this is your electricity reading. Your meter might have three buttons to the side of the display.

Can you connect smart meter to iPhone?

Earth2Tech has a post on a wave of new iPhone apps that help you monitor and manage your power usage by letting users visualise data gathered by smart meters – 7 iPhone Apps to Manage Energy Consumption.

How do smart meters communicate?

How do smart meters communicate? Smart meters don’t need the internet to communicate. Instead, they work by using two wireless networks: the HAN (home area network) and WAN (wide area network). Your HAN is a secure network contained within your home that allows digital devices to communicate with each other.

How do I reconnect my electric smart meter?

Reconnecting your electricity meter

1. Press A and B at the same time – hold for about 10 seconds.
2. You should hear a click when you’re back on supply.

How do I check my prepaid meter balance online?

If you want to check your prepaid balance or know the amount of total credit used, press 07 on your prepaid keypad and hit the blue button. Your available balance will be displayed on the screen in this format (150.15). This is how to recharge and check balance on your prepaid meter without any difficulty.

Do smart meters still need to be read?

You don’t need to take any readings with a smart meter, it will do that automatically. But if you want them for your own peace of mind, you can still get them.

How do you read a digital electric meter UK?

To read the meter:

1. Read the first 5 dials from left to right – ignore any red dials or dials marked 1/10.
2. If the pointer is between two numbers, write down the lower number – if it’s between 9 and 0, write down 9.
3. If the pointer is directly over a number, write down that number and underline it.

How do I get USSD code tokens?

How do I buy power tokens? You can use KPLC USSD code *885# , vendIT, Airtel money, Pesapal, Equitel, T-cash, Mwangaza app, Jaza pay, or even Dynamo tokens. But most people use KPLC PAYBILL 888880 or Pata pawa vendors.

What is the KPLC USSD code?

KPLC bill via USSD code
You can also check your postpaid bill and access a wide variety of KPLC services fast and easy by dialling the USSD code *977#.