The red dial is a leak detector, so if everything is off including things like icemakers and it is moving, you have a leak on your side of the meter.
What are the dials on my water meter?
On the meter face there are two sets of numbers, black on the left and red on the right. The black numbers show the number of cubic metres used, while the red ones and the dials show litres. When submitting a meter reading, only read the black numbers and ignore the red numbers (one cubic metre = 1,000 litres).
How do you read a water meter with two dials?
If there is any movement, there is a leak. To read the round-reading meter, begin with the dial labeled 100,000 and read clockwise to the dial labeled 1,000. If the hand on any dial is between two numbers, use the lower number. The hands on individual dials may rotate either clockwise or counter clockwise.
How do United Utilities read water meter?
Automated Meter Readers (AMRs) are clever things. They are meters fitted with a built-in radio transmitter, which sends your meter reading to one of our receivers as it passes by your home. This means that we can read your meter remotely, rather than someone coming to your home to do it manually.
How do you read a water dial with 6 dials?
If you have a six-dial meter, a label by each dial indicates how many cubic feet that dial is recording. For instance, when the dial labeled 1,000 moves from one digit to the next, that means that 1,000 cubic feet of water have been used. Read the largest dial first and then move down to the smallest dial.
How do I read my water meter x100?
They typically say things like x 10, x 100, x 1,000 etc. Start with the highest number. In our example, that’s the x 100,000 dial and it is set to 2. Our first number is 2, which represents 200,000 (2 x 100,000) then go to the next highest numbered dial.
How often should water meters be read?
Meter reading
If you have a water meter, it should be read at least once a year, and read by your water company at least once every two years. Some water companies might read your meter more frequently. Often the water meter is installed so that they do not have disturb you, but can read the meter from outside.
How often should you submit a water meter reading?
It’s good to check your water meter regularly anyway, as it can help to identify a leak on your supply or find any problems with your meter.
How does a remote read water meter work?
We’ve chosen a system that uses a small radio transmitter powered by a battery that is connected to the water meter by a cable. The radio device collects a reading from the meter and transmits the reading to a collection/receiver device located in a vehicle that’s being driven through your neighborhood.
What are the units on a water meter?
Water meters in the U.S. typically measure volume in gallons or cubic feet. One cubic foot = 7.48 gallons and 100 cubic feet = 748 gallons. Water charges are typically based on 100 cubic feet or on 1000 gallon units.
What is meter reading?
meter reading – the act of measuring with meters or similar instruments; “he has a job meter reading for the gas company”
Contents