Power Extender Kit.
If you’re lacking a C wire and have at least four wires at your thermostat to work with (refer to this article if you only have two wires), you’ll want to install the Power Extender Kit (PEK). The PEK gets installed at your furnace control board and is wired in with your existing thermostat wires to create a C.
Does ecobee include Pek?
Ecobee smart thermostats come with a Power Extender Kit included free of cost, but not everyone needs to use the kit. That’s why we have provided additional information to help you determine if you need to use the PEK and how to install it if you do.
How do I remove ecobee Pek?
How to Remove Ecobee Thermostat from The Wall
- Cut Power to your HVAC system.
- Confirm the Power is off.
- Pull the Ecobee Thermostat straight out from the wall.
- Remove wires from the terminals on the backplate.
- Remove the two screws holding on the backplate and trim plate (if installed)
Can I use ecobee without C wire?
Even though it comes with an adapter for missing c-wires, ecobee is what we’d pick even for systems with a c-wire. If you’ve got a 24v HVAC system but no C-wire, check out the ecobee product line. Every ecobee ships with an adapter that you can install yourself at your furnace to make up for a missing C-wire.
What is o’b wire on thermostat?
O, B, O/B: These wires are responsible for switching the changeover valve in a heat pump system. The O wire reverses the valve from heating to cooling, and the B wire switches the valve from cooling to heating.Emergency heat is only used if there’s a problem with your heat pump.
How is your O B reversing valve energized?
Heat pumps will have a reversing valve, which switches the heat pump from heating mode to cooling mode. The valve will operate in one of two ways: 1) O reversing valve (energized in cooling) or 2) a B reversing valve (energized in heating).
Does the Ecobee Lite have a battery?
There’s one caveat: The Ecobee3 Lite doesn’t offer a rechargeable battery like Nest, so you’ll need to have a C wire to power the digital display or install the included Power Extender Kit. Shut off power to your thermostat at the circuit breaker.
Does Ecobee run on batteries?
Your ecobee room sensor is powered by a single 3 Volt CR-2032 battery.
What is C wire on thermostat?
A C-wire, or a common wire, runs from your low voltage heating system (24v) and carries continuous power to your thermostat. In today’s electric market, most newer heating and cooling systems have C-wires, which guarantees compatibility for the installation of all smart thermostats.
Why is my Ecobee screen black?
If your ecobee was previously powered on and working fine, a sudden black screen usually indicates insufficient voltage going to the thermostat. The ecobee draws power from the furnace, so any disruption to this power source will result in a loss of power at the thermostat.
What color is the C wire on a thermostat?
blue wire
The blue wire on the thermostat is the Common or C wire.
Does Nest thermostat E work without C wire?
The Nest thermostat contains a rechargeable lithium ion battery.In a system with a C-wire, the Nest charges itself from the C-wire’s current and all is fine. In a system without a C-wire, though, Nest recharges its battery when the heating or cooling runs.
How do you know if you have C wire?
It is easy to see if you already have a c-wire connected to your system. Simply remove your current thermostat face from its baseplate and look for the terminal labeled with the letter c. If this terminal has a wire attached to it, you have an active c-wire.
Is the C wire blue?
Blue wires are also called C wires because they are the Common wire. C wires are necessary for any smart thermostat that needs to be connected to a power source 24/7, regardless of your heat pump type.
Is C wire the same as RC wire?
The C wire, or common wire enables the continuous flow of 24 VAC power to the thermostat. Technically speaking, power flows from the R (red) wire, but not continuously (not on its own, anyway).
What color is b wire on thermostat?
Blue
Thermostat Wiring Color Code Chart
| Marking | Wire Color Code | Description |
|---|---|---|
| Y2 | Yellow | Secondary cool call relay |
| G | Green | Fan relay |
| O | Orange | Change-over relay to cool relay |
| B | Blue | Change-over relay to heat relay |
What does R and W mean on thermostat?
W wire heat. R wire heat power. W wire heat.
What does G mean on thermostat?
G: The G terminal controls the fan relay and is responsible for turning the blower fan on and off automatically or manually via the thermostat. RC: The RC terminal is the 24-volt cooling power supply.
Does the reversing valve energized in heat or cool?
When the reversing valve is energized, it will produce the opposite transfer of heat from its relaxed state. For example, a reversing valve installed in such a way as to produce cooling when relaxed will produce heating when energized.
Is O energized in heating or cooling?
Most commonly, O/B is energized in Cooling (O on cool). For Rheem or Ruud brand heat pumps, the O/B must energize on heating (B on Heat).
Does ecobee Lite come with Pek?
However, both the ecobee3 lite and ecobee4 come with a PEK included in the box for installation without a C wire.
Contents