If your gas meter screen is blank Your gas meter is battery powered so to save power the screen will be blank. To take a reading from your gas meter, press the round button between the two arrowed buttons and the reading will show on screen.
Why has my gas meter gone off?
Your gas meter will switch itself off if it hasn’t been used for a while, or has completely run out of credit and emergency credit.
What causes the meter box to be blank?
If you have a smart meter, the display will appear blank due to being in ‘Sleep mode’. Press any button on the meter keypad to wake it up.
Why has my smart meter gone blank?
If the screen has gone blank, the first thing you should do is plug it in and recharge it. Once it’s plugged in, press the small, flat round button on the back to turn the screen on again. We recommend keeping the IHD plugged in, ideally somewhere you can see it, like a kitchen windowsill.
How do I get my gas meter back on?
Make sure all your gas appliances are turned off. When your gas meter is ready to connect, it’ll say PUSH TO RECONNECT. Press any button, and it’ll automatically begin to reconnect (this may take a few minutes).
Why are my gas and electric meters blank?
If your gas meter screen is blank
Your gas meter is battery powered so to save power the screen will be blank. To take a reading from your gas meter, press the round button between the two arrowed buttons and the reading will show on screen.
What is a Han light?
HAN – Home Area Network
This light shows the connection status of your electricity meter, gas meter and IHD with your communications hub on the HAN (Home Area Network).
Who is responsible for faulty electricity meter?
Your supplier is responsible for making sure your meter works properly. If you’re a tenant and your landlord pays the energy bills, tell them you think the meter might be faulty. They will be responsible for contacting the energy supplier and sorting out the issue.
Can I just unplug my smart meter?
Can I unplug my in-home display? We recommend that you always leave your in-home display plugged in to the electricity mains and fully charged. The built-in battery can last for up to four hours, so you can unplug it for a short while if you need to.
How do I reset my British Gas gas meter?
Restore my gas supply using my meter
- Ensure that all gas appliances are switched off.
- Press button A on your gas meter to wake the screen.
- Press B on your gas meter.
- Press and hold A until you hear the supply come on.
What do I do if my smart meter is not working?
The smart meters are probably still working well. The IHD needs a good charge on its battery, or to be plugged in, also it needs to be quite close to the actual electricity meter. To reset it it turn it right off by holding down the power button for 10 seconds and then power it back on again, it should work.
How do I reactivate my gas smart meter?
Gas smart Pay As You Go meter
- Press the Black button (button B).
- You will see the message, Appliances Off? Hold A For Gas.
- Press and hold the Orange button (button A) until you see the message, Release A For Gas.
- Take your finger off the button and wait.
- You should see a screen that shows available credit.
How do I turn on my smart gas meter?
To activate your gas supply:
- Press any button on your PAYG gas meter to wake it up.
- Press the black button (‘B’) on your meter you’ll see ‘For gas’ appear in the bottom half of the screen.
- Now press and hold the black button until told to release.
How do I reconnect my smart meter?
To restore the lost connection to your smart meter, you’ll need to:
- Take your In-Home Display to where your electricity meter is located.
- Once you’re close to the meter, hold down the OK button until the In-Home Display turns off and then on again.
- You should then see the message: your smart meter is now paired.
How do you reset a prepaid meter?
Press the I key followed by 008. The consumption and number of days are displayed on the meter. The day and consumption counters will be reset by pressing the i key twice.
How do I reset my Eon gas meter?
Once you’re back in credit your electricity supply will automatically reconnect. To get your gas supply back on you’ll need to press ‘B’ on your meter followed by ‘A’ and then ‘B’ within 30 seconds of each other.
Is there a battery in a gas meter?
Gas meters
These are powered by a battery that’s built into the meter, due to safety reasons you won’t be able to access it. The battery is designed to last over 10 years before a replacement is required and when it is, the gas meter will alert our systems.
Does a smart gas meter have a battery?
While electric smart meters are wired into the National Grid, the gas ones are powered by batteries designed to last for at least a decade.Once the gadget dies, the gas supply in some cases is automatically turned off and an engineer has to replace the battery unit before the supply is reconnected.
Do gas meters have batteries?
All gas meters (smart and traditional) have an internal battery which powers the screen or dial (they aren’t wired to the power supply like your electricity meter). When the battery is low you may notice your gas meter will emit a beeping sound.
Why does my smart meter have a red light?
It’s completely normal for there to be a flashing red light on your meter. In fact, the light shows that energy is being used and sometimes it will flash faster if there is more energy being used.
Are smart meters still a problem?
More than a third of households that have had smart meters installed have reported having problems.More positively, 29% of homes say their smart meter has helped cut energy bills, while two-thirds say their device has made them more aware of how much energy they use.
Contents