How Do I Reset Merkury Smart Bulb?

Screw in the MERKURY bulb and turn on the power. The bulb should be quickly flashing 2 ? per second. How do I reset the device and what does the blinking light mean? Reset the bulb by turning it off and on three times.

How do you reset a merkury smart light bulb?

Resetting a Merkury smart bulb is a simple process. You will just turn the bulb off and on at 1-2 second intervals to get a factory reset in most instances.

How do I get my Geeni light back online?

How to reconnect it? To reconnect the Geeni bulb : Reset the bulb by turning it on/off three times. It should now be blinking slowly, which indicates it’s in AP Hotspot mode. You’ll then perform an “AP Mode configuration”.

Is merkury and Geeni the same?

Like most security cameras, this unit connects to your home Wi-Fi network, so you can control it from your smartphone using the Geeni app (Geeni is a sibling brand to Merkury Innovations).

How do I reset my Geeni smart bulb?

Hello! To reset the Geeni Smart Bulb, turn the bulb on and off 3 times (You’ll see the bulb blinks fast) to reach Easy Mode, which is the primary way to connect to the app. (In Easy Mode, you’ll see the bulb flashing quickly, 2x per second). Afterwards, set it up.

Why is my Geeni light not connecting?

Geeni bulb cannot connect to Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

How do you sync Geeni lights?

To group Geeni devices open the Geeni app & follow the below instructions:

1. From your main device list, click on one of the devices you want to group.
2. Press the “…” button on the top right corner for advanced settings.
3. Click on Create Group.
4. Now Choose which devices you’d like to group together and click save.

How do I reset my hue bulb without a bridge?

Bulbs can also be reset if you have an official Philips Hue Dimmer Switch at home. With the light in question powered on, hold the Dimmer Switch close to it and hold down the On and Off buttons together for 10 seconds or so. When the light blinks and then stops blinking, the bulb is reset.

Why is my smart bulb not working?

If your smart light bulb isn’t working, or Alexa can’t discover it, reset your device. To reset your smart light bulb: Go to the manufacturer’s companion app or website to follow instructions specific to your device. Reconnect your smart home device to Alexa in the Alexa app.

How do you put Geeni light in AP mode?

In the Geeni app, on the top corner of the Devices screen, click (+) & select “Smart lighting”. Choose “AP Mode” in the top corner. Click Next and enter your Wi-Fi details.

Why is my smart light bulb offline?

Smart lights are offline due to technological difficulties. These issues commonly include poor wi-fi signal strength, a power outage, or equipment failures. When smart lights will not come back online, do a factory reset. By doing so, it will allow the lights to reboot and reconnect to a device.

Is merkury compatible with Alexa?

Merkury Innovations Unveils Geeni Line of Alexa-Compatible Smart Home Products.Geeni bulbs and plugs will also be Alexa compatible, allowing voice control using Amazon Echo, with additional integrations forthcoming.

Are merkury bulbs compatible with Alexa?

The Merkury smart bulb can also work with Alexa and Cortana, which would make it possible for you to use your voice control commands to control the bulb if you would like. The compatibility of this bulb with multi-channel and bands on the Wi-Fi.

How do I connect my merkury bulb to Alexa?

Make sure your devices are set up in the Geeni before proceeding.

1. Step 1: Open the Alexa app and click the 3 lines button in the upper left corner.
2. Step 2: Tap on “Skills”
3. Step 3: Search for “Geeni”.
4. Step 4: Tap on the Geeni icon.
5. Step 5: Tap “Enable”.
6. Step 6: Sign into your Geeni account.

Why is my Geeni app not working?

Geeni Camera Cannot connect to Wi-Fi network. Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.

How do I reconnect my Hue lights?

Follow these steps:

1. First be sure all your lights are connected and turn on.
2. Open the Philips Hue app.
3. Go to the setting section.
4. Click on “Add serial number”
5. Take your bulb and then enter the 6 character you need to introduce.
6. Your lights are now all connected to the Philips Hue bridge.

How do I factory reset my Hue?

1 Factory Reset

1. Ensure the Bridge is powered on.
2. Remove the Ethernet cable from the Bridge.
3. Turn the Bridge up-side down.
4. Using a pointed tool, press and hold the reset button for 5 seconds.
5. The LED on the front will blink to show that the reset is in progress.