A “wash” is a general “fill” of light and color evenly across the stage through the use of lighting fixtures (typically, softer lights cast from Fresnel lamps), and colored using colored lighting gels. It’s also known as a Fill.
What does a wash light do?
Wash Fixtures
Wash light fixtures do exactly what they sound like they do: they bathe an area with light and have soft edges on the beam. Washes are great for evenly lighting up large areas like stages, architecture, or dance floors.
What is a general wash light?
A general lighting effect, where a broad beam is used to generally light up an area on a stage. Typically instruments known as floodlights are used to create wash. With a few exceptions (such as Fresnel lights) floodlights do not have lenses and therefore cannot be specifically focused.
What is a LED wash light?
LED wash lights are perfect for filling a certain area with light.These lights are generally portable and lightweight, making them perfect for DJ’s, Bands and more.
How many wash lights do I need?
If you are struggling with your front wash coverage, a common error is to have an even quantity of lights, a small stage may have 4 front wash lights or a medium stage will have 8, I would recommend simply buying at least one more fixture, place this directly in the middle of the lighting bar and evenly space your
How can you avoid dead spaces in your light on stage?
To avoid dark spots, make sure there is enough overlap between acting area coverage, and ensure the corners of the stage are adequately lit. Rule Two Check for stray light make sure the proscenium arch, orchestra pit, audience seating areas are not illuminated.
What is a full stage wash?
Stage wash can refer to: Stage wash (audio), during an amplified concert performance, unwanted sound picked up by the microphones.
What are wall washer lights?
Wall washing is when light is uniformly spread out over a wall from top to bottom.Wall washing is best used on walls with a smooth, flat surface to limit shadowing. To create a wall washing effect, lights need to be mounted at or above ceiling height, so they can effectively wash up to 8 or 9 feet of vertical space.
What are par cans used for?
PAR Cans are the most widely used light for concerts, clubs, and theatrical lighting. PAR cans come in a wide variety of sizes and shapes; from the minuscule PAR16 to the 1000 watt PAR64 cans.
What are Fresnel lights?
Fresnel lighting has been around for a long time, and for many years it was the staple of the motion picture industry. The Fresnel lens is essentially a lens that has been carved out, to provide light controlflood and spot, projecting a beam of light, without projecting the filament of the light bulb itself.
What is Colour wash lighting?
Colour wash lighting is a lighting design option that involves washing the whole room with your chosen colour or colour combinations. This is different to up-lighting, where the beams of coloured light point upwards to illuminate the walls and ceiling, and any architectural features.
What does uplighting mean?
Uplighting is the placement of individual light sources at the base of architectural details or points of interest, typically around the perimeter of a space, to draw attention to those details. From a lighting design standpoint, uplighting is the first brush stroke in event design, says event designer Brian Toner.
What kinds of things can lighting add to a show?
Functions of lighting
- Selective visibility: The ability to see what is occurring on stage.
- Revelation of form: Altering the perception of shapes onstage, particularly three-dimensional stage elements.
- Focus: Directing the audience’s attention to an area of the stage or distracting them from another.
What is DMX lighting?
DMX is an acronym for Digital Multiplex. It is the standard digital communication protocol that is used to remotely control intelligent lighting fixtures.
How are stage lights controlled?
A lighting control console (also called a lightboard, lighting board, or lighting desk) is an electronic device used in theatrical lighting design to control multiple stage lights at once.All lighting control consoles can control dimmers which control the intensity of the lights.
What are stage lights called?
Stage lighting instruments (lanterns, or luminaires in Europe) are used in stage lighting to illuminate theatrical productions, concerts, and other performances taking place in live performance venues.In the UK, they are called “lanterns” or “luminaires”.
How do you light a stage on a budget?
Cheap Stage Lights With Fixtures
Lighting does not even have to be expensive. You can use strip lights from a hardware store or colored neon. Placing it behind the band will also add a very flattering backlight. Of course, for those with a bit more of a budget, the band logo in lighting would always look good.
Why is it called ghost light?
Theater scholar James Fisher writes in Historical Dictionary of American Theater: Beginnings that the ghost light comes from the days of gas-lit theatres and refers to dimly lit gaslights used to relieve pressure on gas valves.
Why can’t you whistle in a theatre?
Whistling in the theatre is considered bad luck. This superstition started in the middle of the 1600s when theatrical scenery began to fly. Sailors had extensive knowledge of ropes, rigging and knots and were hired backstage as run crew.
Why are there ghost lights?
A ghost light is a single bulb left burning whenever a theatre is dark. Some argue that its function is to chase away mischievous spirits; others insist it lights the way for the ghosts that are said to inhabit virtually every theatre, keeping them happy and contented.
What is a fixture in stage lighting?
Theatrical stage lighting fixtures, also known as stage lighting units, are the paint brushes we use in creating the painting we put on stage. They vary in size, shape and output. Fundamentally there are wash fixtures and spot fixtures.
Contents