Who Can I Call To Light My Pilot Light?

Instead, leave the house and call your local gas company or 911.

How much does it cost to relight a pilot light?

The Cost of Relighting the Pilot Light
A plumber can help reignite the pilot light. They will charge you an hourly fee of $40 to $150. This is usually a fairly brief project, and may just take an hour.

Will the gas company light My pilot?

Absolutely! We can send a gas service technician to light your pilot, and conduct a gas safety check of your gas fireplace or any other gas appliance to ensure your safety.

Can I relight my own pilot light?

If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.

What do you do when your pilot light goes out?

Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.

Is it bad if the pilot light goes out?

A pilot light is a small flame that is built into your gas heating appliances, such as a furnace or water heater.If the pilot light goes out for any reason, the current stops, the valve closes, thus preventing any gas from leaking.

How can I get my gas turned back on?

The only way to get it turned back on is by you, the homeowner, contacting the gas company. You have to call the gas company and request they turn your service back on. And it’s an almost identical process when a landlord turns off the gas between tenants or a seller turns it off after moving out.

How do I know if my pilot light is out?

How to Tell If the Pilot Light Is Out

1. Locate the front cover panel on your furnace. It should be a little door that’s easily visible.
2. If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
3. If you don’t see a flame, your pilot light is out.
4. If there is a flame, check the color.

How do you reignite a pilot light on a gas fireplace?

Hold the pilot button down for about 20 seconds to give the thermocouple time to heat up, then release it. The pilot should stay lit, but if it doesn’t, relight it and hold the button a little longer. Turn the button to the “On” position, then replace the fixed glass assembly and the decorative cover. You’re done!

How do you restart a gas furnace?

Turn the gas control valve off and let the gas dissipate for five minutes before turning it back on in order to prevent a fire hazard. Turn the gas back on quickly, not letting it build up for longer than a couple of moments. If you get interrupted, turn the gas off again and repeat the process.

Do I need to turn gas off if pilot light goes out?

Since the thermocouple regulates gas going to the pilot, it should cut off on its own if the pilot ever goes out, but that’s only if it’s functioning correctly. If the thermocouple isn’t working properly, then it’s possible that it’s allowing gas to leak into the very room where the heater is located.

Why won’t the pilot light come on?

If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.

How much does a thermocouple cost?

It costs $150 to $250 to replace a thermocouple. It checks to make sure the pilot light is on. It will shut the gas off if it’s not.

How do I turn my gas back on after disconnecting?

You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.

Does my heater have a pilot light?

Water heaters, gas fireplaces and old gas stoves also often have similar pilot lights. If your furnace has a round knob on the gas valve with the words OFF/ON/PILOT, you have what’s known as a standing pilot ignition.

Does central heating have a pilot light?

There is no pilot light to go out on a central gas heater — and no chance of gas escaping into the room — which also means you cannot ignite the burner manually. From time-to-time, the gas heater may require restarting to engage the igniter and burners.

Why is my gas fireplace not lighting?

If gas is coming out of the pilot, but it still won’t light, the spark igniter could be the problem. Alleyne says to look for and clear out any debris between the igniter and thermocouple.The pilot lighting, but not staying lit, indicates that the thermocouple is worn out, Worthen says.

Where is the pilot switch in my fireplace?

Locate the black knob on the left side (marked on/off/pilot). Push this button in and rotate counter-clockwise until the word “Pilot” lines up with the corresponding arrow.

Where is reset button on furnace?

Locate the reset button on the furnace and press it to reset the furnace. It is usually located inside the blower compartment on the side of the blower motor. Be cautious as the housing may be hot. If the button is popped up, press it down.

When did furnaces stop using pilot lights?

Newer gas furnaces (since about 2010) do not have a traditional pilot light that burns all the time. Instead they use electronic ignition systems that light only as needed. Constant flame or “standing pilot” heating systems are still fairly common in older homes, and they can still be repaired in most cases.

Why is my furnace not starting?

The Pilot Light (Faulty Ignition Sensor) The pilot light or ignition sensor is usually the most common issue when your furnace will not ignite.Put the front panel back on, turn on the gas, and then turn the furnace back on. Turn up the temperature on your thermostat to see if your furnace will now fire up.