How Do I Add Kwikset Lock To Alarm Com?

How do I make my Kwikset lock discoverable?

More videos on YouTube

1. Enter exclusion mode. Put your system into its Z-Wave exclusion mode.
2. Clear the lock. Bring the Kwikset Lock close to your panel or the Z-Wave controller.
3. Enter inclusion mode. Now that the lock has been cleared, you can begin the pairing process.
4. Pair the lock.

How do I connect my Kwikset Smart Lock?

How to Install and Set Up Kwikset SmartCode Door Locks

1. Step One: Remove Your Existing Deadbolt. First, you’ll need to remove the current deadbolt installed on your door.
2. Step Two: Install the SmartCode Smart Lock.
3. Step Three: Connect It to Your Smarthome Hub.

How do you change the lock code on alarm com?

Go to alarm.com and log into your account.

1. 2) From this page Click the edit icon on that user.
2. 3) From here page click on the faded out lock.
3. 4) Enter in access code.
4. 6) you can also add in lock access by clicking on the faded out key.

How do I pair my Kwikset lock with my phone?

For Android, select (+) sign (bottom right) on the main page, select “Pair A Device”. For iOS, select (+) sign (upper right) on the main page, select “Pair a Device”. Press the “Pair a Device” on the following page. Select the brand, then the product.

How do I connect my Kwikset lock to my phone?

Press the “A” button in the upper left corner for ~10 seconds (the clearing process will be signaled with a beep). This will clear any previous pairings from the lock. Restart the “Add Lock” process within the Premis App, and you should be able to “find” your lock and complete the pairing process.

Why is my Kwikset lock not pairing?

My Lock Won’t Pair
Remove the battery pack. Press and hold the A or Program button while reinserting the battery pack. Keep holding the button for 30 seconds until the Lock beeps and the status LED flashes red. See the Installation and Programming Guides section for button locations for your Lock model.

What Kwikset locks work with alarm com?

Alarm.com Compatible Door Locks

• Kwikset 910 Deadbolt (SmartCode Deadbolt 99100 also supported)
• Kwikset 914 Deadbolt.
• Kwikset 916 Touchscreen Deadbolt.
• Schlage BE468 Lock.
• Schlage BE469 Deadbolt (Only models manufactured after 4/21/2014.
• Yale NexTouch Commercial Lever Lock.
• Yale Real Living Keypad Lever (YRT210)

How do I pair my Z-wave device?

Z-Wave / Zigbee Device Pairing Guide

1. Click on “add device”
2. Click on Other Devices. This will open the paring screen and the gateway will search for the new device.
3. Follow the steps below to complete the pairing of the device with the gateway.
4. Click on Add Device.
5. Click on Other Devices.
6. Power up the Z-Wave device.

How do I set up Kwikset lock app?

Launch the Kevo app and click on the menu button in the upper left corner of your screen. 3. Select “Set Up a Lock”. Once you have read the page displayed, click on the “Get Started” button at the bottom of your screen.

Does Kwikset have an app?

Meet the App. Available for iOS & select Android devices, the smart lock app controls Kevo right from your smartphone or tablet. Grant access with eKeys and monitor who is locking and unlocking.

What devices are compatible with alarm com?

Here are the following types of devices and partners you can choose to have installed and configured in your home:

• Smart Thermostats – Lux, Trane, Linear, Lennox and Radio Thermostats.
• Video Doorbells – Skybell.
• Sensors – image, temperature, motion and window (glass break)
• Door Locks – danalock, Yale, Schlage and Kwikset.

How do I change the master account on alarm com?

TO CHANGE EXISTING USER/MASTER CODES:

1. Follow steps 1 & 2 as above.
2. Select the user from the list that you wish to update.
3. Tap on the current user name to change name details, then select save.
4. Tap on the current user code, enter new 4 digit code, then select save.

How do I connect my Kwikset to Bluetooth?

Ensure that Bluetooth is on, as indicated by a small icon on the upper right corner of the smart device screen. 3. Press and hold the Program button again until Kevo beeps (if sound is turned on). The Bluetooth symbol in the top right corner of the screen should blink while Kevo and smart device are communicating.

How do I update my Kwikset app?

Open the Kwikset app within Bluetooth range of the lock. Tap “Settings.” Available” to begin the updating process. Tap “Update Now” to update the firmware.

How many phones can be connected to Kwikset Halo?

eight
Each lock can pair with up to eight (8) smartphones at a time.

Does Kwikset Halo have Z-Wave?

The Kwikset Halo is a new Wi-Fi-based lock, Aura is a Bluetooth model aimed at buyers on a budget. Kwikset new Halo and Aura smart locks have both made it easier to control them through mobile apps. The Wi-Fi-powered Halo lock skips past traditional low-power wireless standards like Z-Wave, Bluetooth LE or Zigbee.

What smart locks are compatible with alarm com?

Alarm.com compatible Smart Locks

• Kwikset Obsidian. Touchscreen Z-Wave Deadbolt Lock.
• Yale YRL256. Assure Lever Lock with Z-Wave Plus and Touchscreen Keypad.
• Yale YRL236. Assure Lever Lock with Z-Wave Plus and Push-Button Keypad.
• Yale YRD226.
• Yale YRC226.
• Yale YRC216.
• Kwikset 888.
• August Smart Lock Pro.

Do Kwikset locks work with Apple home?

It’s called the Kwikset Premis, and it’s a touchpad deadbolt that works with Apple HomeKit, the smart-home control service built into to Apple’s iOS devices.