What Is The Vivint Installer Code?

2203.
Enter the default installer PIN code (2203) 3. Select the device to control 4.

https://www.youtube.com/watch?v=CeXhoQE9ii4

What is Vivint master code?

Question 9 – What is a Vivint master code? Answer: The default master code is 1111. On the Vivint 2GIG GC2 model, simply go to security, and from there to the menu and to toolbox and enter this default code to reach the user management point.

How do I unlock my Vivint installer toolbox?

Property staff have the ability to unlock a unit’s Installer Toolbox at any time in Site Manager. If troubleshooting requires that you use a PIN, find the unit in Site Manager, select the unit options, and unlock the Installer Toolbox.

How do I get my Vivint pin?

Go to www.alarm.com, and click Login. Enter the same email and password you use for your Vivint account. Click Users. The PINs will be hidden from view.

How do I connect my Vivint to Kwikset?

To add a thermostat, door lock, or module to your system, complete the following steps:

1. Go to your touchscreen panel and touch the home button.
2. Tap Services.
3. Tap the wrench icon.
4. Enter your 4-digit PIN.
5. Tap Add Devices.
6. At this point, go to the device you want to add (door lock, thermostats, light module, etc.).

How do I add Z-wave to Vivint?

At the Vivint panel, press the Home button, then select the three dots in the bottom right-hand corner of the panel. Select Software Version and enter the 4-digit code that appeared in Site Manager after unlocking the Installer Toolbox. Select Smart Home Devices > Z-wave > Add Node. Turn on the physical light switch.

How do you reset Vivint without code?

Hardware: Press and hold the Reset button on the back of the router for 10-15 seconds, then release. Software: In the Configuration Interface, go to the Advanced tab and under the Administration tab click Factory Defaults. Then click the Restore Factory Defaults button.

How do I change my vivint master code?

Change the master code.
The master user should be listed as the first user at the top of the user list. Select the master user to continue. On the next screen, select “change pin”. You will be prompted to enter a desired 4-digit code that will be used as the new master code.

How do I silence my vivint alarm without the code?

To disarm your alarm, Touch the Shield icon on your home screen and drag it down to disarm. 4. Press the alarm icon in the middle to disarm the system and cancel the alarm if there is an alarm in the process.

Can I add my own camera to vivint?

Vivint does not allow the addition of third-party cameras to a home’s Vivint security system; users are required to use only Vivint-compatible equipment. However, Vivint does provide users the option to add up to four Vivint security cameras to their security system for an extra monthly fee.

How long does Vivint take to install?

The actual installation itself may take about three hours, depending on your smart home configuration. During this time, your Smart Home Pro will install your panel and devices and then run tests to make sure everything is in perfect working order.

How do I access my Vivint account?

Go to the Vivint website (www.vivint.com) and click on Customer Login in the upper right corner. Click on Need an account? Enter your email address (this email must be the same that we have on file with your account). Retype your email to verify correct spelling.

How do I use my Vivint camera without service?

Can I Still Use a Vivint Camera Without Service?

1. Vivint cameras cannot be used without service. They require the purchase of the Smart Home Video Monitoring monthly subscription plan.
2. You will have to pay your contract in full to cancel it early.
3. Those on a month-to-month contract can cancel anytime without penalty.

How do you enter a Vivint door code?

SkyControl 3.0 – Change Door Lock Code

1. At the home screen, tap the menu icon in the lower right.
2. Tap Users.
3. Enter your 4-digit PIN.
4. Select the user you want to edit.
5. Make sure their Separate lock PIN option is toggled on.
6. Select Lock PIN to add or edit their door lock code.

Does Vivint work with Z-Wave?

Vivint works well with Z-Wave.

Does Kwikset 913 work with Vivint?

Kwikset locks integrate with your Vivint system to ensure your entryway—and home—is protected.

What is a Zwave switch?

Z-wave switches are one you can control your home lighting from your smart phone, Alexa, or Z-wave controller interface. The configuration options for your lighting are endless.

Is vivint Z-Wave or ZigBee?

The Vivint SkyControl™ panel acts as this Z-wave “mothership,” connecting your Vivint-compatible Z-wave devices for unparalleled control over your household.

Do Schlage locks work with vivint?

Technically, Vivint may well work with any Z-Wave enabled lock, but it specifically uses Kwikset Z-based locks. So you may want to try Yale, August, and Schlage Z-Wave enabled locks. But for perfect and easy integration with Vivint, we strongly recommend Kwikset Z-based locks (see our picks above).

How do I reprogram my vivint?

Factory Reset:

1. Remove the battery pack.
2. Press and HOLD the Program button.
3. Re-insert the battery pack (keep holding the Program button for 30 seconds). The lock should beep and the LED will flash red.
4. Release and press the Program button once more.
5. The lock will re-initiate the handing process (extend/retract the bolt).

How do I turn my Vivint panel off?

On the back of the panel, pull the tab on the left side to remove the battery. This will power the panel down.